Effect of Mechanical Alloying on the Microstructural Evolution of Al60Cr30Si10 Alloys Processed by Spark Plasma Sintering

Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5

In this study, Al, Cr and Si fine powders were alloyed by planetary ball milling to investigate their microstructural evolution,following their mechanical alloying behavior. The formation of Al(Cr) supersaturated solid solution by the Cr grainsembedded in Al-matrix, which contributed substitutional structure is discussed in relation to their structural evolution inaccordance with the distortion of a crystal lattice. The compacts of Al–Cr–Si alloys were prepared by rapid sintering withina short time by dense consolidation above the density of 99.9% as the formation of intermetallics, except in the case of thedistribution of single-phases induced by the Al-melting. The formation behavior of intermetallics was dominated by dependenceon the structures of the milled-powder and subsequent sintering temperature. To estimate the consolidated behaviorsof compacts, various approaches derived from TEM and XRD analysis were taken to obtain microstructural evidences ofthe inter-diffusion, following the presence of thermally stable intermetallics.

Rapid Consolidation of WC‑ZrSiO4 Hard Materials by Spark Plasma Sintering: Microstructure, Densification, and Mechanical Properties

Jeong‑Han Lee,Ik‑Hyun Oh,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.9

Densely consolidated WC-based hard materials with 5–20 vol% ZrSiO4was fabricated by spark plasma sintering at 1400 ℃ ata constant heating rate of 70 ℃/min−1. To achieve mechanical alloying of WC-ZrSiO4, planetary ball milling was carried outfor 12 h, during which the brittle-brittle components (WC-ZrSiO4) became fragmented and their particles became refined. Itwas observed that certain, specific, non-isothermal sintering kinetics, such as apparent activation energy, sintering exponents,and densification strain, affected the densification behavior. The evolution of phase structure from powder to compact wasfound to be related the lattice distortion and micro-strain in the basal planes of WC. By examining the mechanical propertiesof the samples, it was that the added zircon content leads to enhanced fracture toughness (12.9 MPa m1/2) owing to thepresence of WC-ZrSiO4 in the cemented carbide. In fact, the microcrack propagation of the fracture passed through zirconfrom a transgranular to a ductile component (fcc) where the crack tips could be absorbed.

Influence of Phase Composition in TiAlSiN Hard Coatings on the Evolution of Structure and Mechanical Properties

Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.3

The aim of this study is to investigate the structural evolution and mechanical properties of TiAlSiN coatings when processedby the arc ion plating method. To form a hard coating, Ti, Al, and Si powders were mechanically alloyed by planetary ballmilling; the powders were then densely compacted during a rapid sintering process into a ternary system coating, i.e. TiAlSi. The evolution of the structural phase from a powder to a compact material is dominated considerably by phase states suchas a supersaturated solid solution or intermetallic compounds. In the case of coating layers, the factors that determine thestructural evolution are associated with the phase stability of the nano-crystalline structure that in turn is associated withthe Ti/Al composition ratio. Motivated by this, we performed experiments to investigate the distribution of microstructures;the material’s binding energy, quantitative properties, transformation of crystal structure, and distribution of amorphous/crystalline were all recorded. In particular, the relationship between the physical and chemical properties during the coatingprocess is considered to be the dominant factor controlling the orientation and morphology of that zone (1, T, and 2). TheTiAlSiN coating layer was found to have hardness above 45 GPa and an adhesion above 100 N. In other words, understandingthe evolution and structure of TiAlSin helped us to produce a material with excellent properties that can be used as a hardcoating. Specifically, these properties were induced by a grain refinement of the nano-crystalline structure that correspondsto an increase in the silicon nitride contents.

Adult Patients with Congenital Muscular Torticollis Treated with Bipolar Release : Report of 31 Cases

Lee, Gun Sang,Lee, Myung Ki,Kim, Woo Jae,Kim, Ho Sang,Kim, Jeong Ho,Kim, Yun-Suk The Korean Neurosurgical Society 2017 Journal of Korean neurosurgical society Vol.60 No.1

Objective : We assessed the surgical results of bipolar release in 31 adult patients with uncorrected congenital muscular torticollis (CMT) and more than 12 months of follow-up. Methods : Thirty-one patients underwent a bipolar release of the sternocleidomastoid muscle (SCM) and were retrospectively analyzed. The mean follow-up period was 14.9 months (range, 12-30). The mean age at time of surgery was 30.3 years (range, 20-54). Patients were evaluated with a modified Lee's scoring system, cervicomandibular angle (CMA) measurement, and a global satisfaction rating scale using patient self-reporting. Results : The modified Lee's scoring system indicated excellent results in 4 (12.9%) patients, good in 18 (58.1%), and fair in 9 (29.0%) at the last follow-up after surgery. The improvements in neck movement and head tilt were statistically significant (p<0.05). The preoperative mean CMA was $15.4^{\circ}$ (range, 5.4-29.0), which was reduced to a mean of CMA of $6.3^{\circ}$ (range, 0-25) after surgery (p<0.05). The global satisfaction rating scale was 93.7% (range, 90-100). A transient sensory deficit on the ipsilateral lower ear lobe was noted in three cases. No significant permanent complications occurred. Conclusion : Bipolar release of the SCM is a safe and reliable technique for the treatment of CMT in adults.

판상형 충전제의 함량과 배향에 따른 PP복합체의 영률 변화 연구

서상범(Sang Bum Seo),이용현(Yong Hyun Lee),정선경(Sun Kyoung Jeong),이승구(Seung Goo Lee),이기윤(Kee Yoon Lee) 한국고분자학회 2012 폴리머 Vol.36 No.2

이 논문은 판상형 충전제의 함량과 배향에 따라 폴리프로필렌 복합체의 영률 변화에 미치는 영향을 연구 하였다. 이론적인 예측은 Lee와 그의 연구자들에 의해 제안된 두 개의 종횡비, ρα=a1/a3과 ρβ=a1/a2 를 이용하여 3차원 타원체의 형상을 계산하였고 실험값과 비교 분석하였다. 판상형 충전제로 운모와 탈크를 사용하였다. 충전제의 형태는 SEM을 이용해 관찰하였고, 종횡비는 고분자의 흐름을 기준으로 좌표축을 설정하여 통계적 방법으로 계 산하였다. 충전제가 운모인 경우에 ρα=13.5와 ρβ=1.8이었고, 탈크의 경우는 ρα=3.8과 ρβ=1.4이었다. 또한 충전제 의 2개의 종횡비와 함량이 기계적 물성에 미치는 영향을 실험적으로 연구하였다. 운모의 경우 30 wt% 함량일 때 E11이 약 2.7배 향상되었다. 탈크의 경우는 E11이 약 2.3배 향상하였다. This paper studied the effects of the content and the orientation of the disk shape fillers on the modulus of PP composites. The experimental results were compared with the theoretical calculations which included the three dimensional ellipsoids and analyzed by two aspect ratios, ρα=a1/a3 and ρβ=a1/a2 proposed by Lee and his researchers. Mica and talc were used as disk shape fillers in the composites. The shapes of mica and talc were observed by SEM and aspect ratios were statistically calculated. For the case of mica, the average aspect ratios were ρα=13.5 and ρβ=1.8, and for the case of talc, they were ρα=3.8 and ρβ=1.4. Also, the effects of two aspect ratios and the content of filler on the mechanical properties were studied: For 30 wt% of mica, E11 increased up to about 2.7 times, and for the other case of talc, E11 increased up to about 2.3 times, respectively.

큰재갈매기에서 발생한 폐 아스퍼질러스증

윤정식 ( Jeong Sik Yoon ),강상철 ( Sang Chul Kang ),윤영민 ( Young Min Yun ),이상 ( Sang Lee3 ),김재훈 ( Jae Hoon Kim ) 한국동물위생학회 2012 韓國家畜衛生學會誌 Vol.35 No.1

A female slaty-backed gull (Larus schistisagus) died suddenly without apparent clinical signs. At necropsy, well demarcated 7 to 10 mm yellow to white nodules were presented at the lungs and thoracic cavity. Microscopically, multifocal necrotic granulomas were observed in the lung tissue and amorphous acidophilic fibrin were accumulated in the granuloma and normal alveolar space. Periodic acid-Schiff (PAS) staining demonstrated numerous pinkish red branched hyphae embedded in the center of these granulomas. According to fungal culture using Sabouraud`s dextrose agar plate, Aspergillus fumigatus was isolated from lung lesions. This is the first report for pulmonary aspergillosis of wild slaty-backed gull in Korea.

GO-62 : Lower extremity edema in patients with endometrial cancer

( Myong Cheol Lim ),( Jeong Seon Lee ),( Jung Nam Joo ),( Sang Soo Seo ),( Sok Bom Kang ),( Sang Yoon Park ) 대한산부인과학회 2012 대한산부인과학회 학술대회 Vol.99 No.-

The objective of this study was to investigate clinical manifestations of lower extremity edema (LEE) in endometrial cancer Medical records for LEE and/or responses to the Gynecologic Cancer Lymphedema Questionnaire (GCLQ) were evaluated in 177 patients with endometrial cancer Patients had a median age of 53 years. Sixty-seven patients (37.9%) had past (9 patients, 13.4%) and/or current patient-reported LEE (58 patients, 86.6%). Symptoms reported on the GCLQ in over 20% of respondents were swelling, numbness, aching , and heaviness. GCLQ total symptoms score was significantly higher in patients with current LEE. Most of the LEE (43/67, 64.2%) developed within 12 months after surgery and LEE lasted more than 6 months in most patients (56/59, 94.9%) Prospective clinical trials are needed to know the clinical significance, impact on quality of life, and preventive strategy of LEE in patients with endometrial cancer

해외사례 벤치마킹에 기반한 국내 CM 대가체계 개선 시사점 도출

김상범,이정대,김재욱,Kim, Sang-Bum,Lee, Jeong-Dae,Kim, Jae-Wook 한국건설관리학회 2008 건설관리 : 한국건설관리학회 학회지 Vol.9 No.1

국내 CM은 2001년 건설산업기본법에 의해 개념과 범위가 정의된 후 지속적인 성장을 계속해 오고 있다. 하지만, 이러한 CM 제도에 기반한 성장에도 불구하고 국내에서의 CM 적용성과는 기대치에 비해 상대적으로 낮은 것으로 나타났다. 그 주요원인의 하나로 국내 CM제도가 책임감리에 비하여 업무범위가 넓지만, 대가기준은 책임감리에 비해 낮기 때문인 것으로 분석되었다. 따라서, 국내 CM 대가체계의 합리적인 기준을 정립하는 것이 시급할 것으로 판단된다. 본 연구에서는 CM 대가체계의 합리적인 기준을 마련하기 위하여 CMAA, ASCE, DOE, DOL 등의 다양한 해외사례 벤치마킹 연구를 통하여 국내 CM 대가체계를 비교하여 대가 상승요인을 추정하고 대가산정 개선방향을 제시하였다. 분석결과 대가수준은 해외에 비하여 현저하게 낮은 수준인 것으로 판단되었으며, 업무범위는 해외와 비교하여 그 폭이 좁으며 획일적인 구조를 가진 것으로 분석되었다. 따라서, 본 연구에서는 글로벌스탠다드에 따르는 국내 CM 대가체계를 개선하기 위하여 실비정액보수가산(Cost Plus Fixed Fee) 방식을 제시하고, 입 낙찰 전반에 걸친 CM 대가체계에 대한 기준(Framework)을 제시하였다. The Korean Construction Industry significantly contributed to the Korean economic development not only by preparing the domestic infrastructure but also by successfully conducting various international projects. However, major incidents such as the collapse of Sung-Su Bridge and Sam-Pung Department Store along with stagnation of Korean Economy have raised questions about underlying systematic problems of the Korean Construction Industry. As a solution to resurrect the Korean Construction Industry, the Construction Management (CM) system introduced in late 1990's and increasingly utilized as an innovative delivery system. Despite of the fast growth of CM, the performance of CM has not been up to the hype and low CM fee has been identified as one of the main reasons of unsatisfactory CM performance. Therefore, this research attempted to propose ways of improving 'CM Fee Guidelines' published by Korean Ministry of Construction and Transportation by conducting a benchmarking study on Global Standards of estimating CM Fee. International organizations benchmarked in this research include CMAA, ASCE, DOL, DOE, etc. Various investigation and analysis revealed that Korean 'CM Fee Guidelines' need to significantly modified comparing to Global Standards. This research also tried to prepare recommendations to improve the CM deliver system focusing on the 'Method of CM Fee Estimation' and Selection of a CM firm as an owner's agent.

추황배(Pyrus pyrifolia Nakai cv. Chuhwangbae) 과피로부터 1종의 Sterol과 3종의 배당체 화합물의 단리·동정

이유건(Yu Geon Lee1),조정용(Jeong-Yong Cho),이현주(Hyun Joo Lee),이용현(Yong Hyun Lee),이상현(Sang-Hyun Lee),한태호(Tae-Ho Han),김월수(Wol-Soo Kim),박근형(Keun-Hyung Park),문제학(Jae-Hak Moon) 한국식품과학회 2013 한국식품과학회지 Vol.45 No.5

본 연구에서는 배의 유용성 증명을 위한 일환으로 배의 화학성분을 분자수준에서 밝히고자 하였다. 이에 배 과피 MeOH 추출물을 용매분획하여 얻은 EtOAc-산성 분획과 EtOAc-중성분획을 대상으로 Sephadex LH-20, silica gel, 그리고 ODS colmn chromatography와 HPLC를 이용하여 정제 및 단리하였다. 그 결과, EtOAc-산성 분획과 EtOAc-중성 분획으로부터 각각 2종씩의 화합물을 단리하였다. 단리된 화합물 1-4는 1H- 및 13C-NMR 분석을 통하여 각각 (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (화합물 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone(piceoside, 화합물 2), β-sitosterol (화합물 3), 그리고 β-sitosteryl 3-O-β-D-glucopyranoside (화합물 4)로 동정되었다. 단리된 3종의 배당체 화합물(화합물 1, 2, 4)들은 본 연구에 의해 배로부터 처음 동정되었으며, 화합물 3은 추황배로부터 처음 동정되었다. 본 연구결과가 배 함유 성분연구는 물론 배의 기능성 해명 연구에도 추후 중요한 기초자료로 활용되길 기대한다. We isolated and identified antioxidants from acidic and neutral ethyl acetate fractions of the peel of pear (Pyrus pyrifolia N. cv. Chuhwangbae). We isolated 4 compounds from the methanol extract, by using 3 different types of column chromatography (Sephadex LH-20, silica gel, and octadecylsilane) and preparative HPLC. We identified the isolated compounds as (S)-(+)-2-cis-abscisic acid O-β-D-glucopyranosyl ester (compound 1), 1-[4-O-β-D-glucopyranosyl]phenyl ethanone (picroside, compound 2), β-sitosterol (compound 3), and β-sitosteryl 3-O-β-D-glucopyranoside (compound 4) by nuclear magnetic resonance analysis. We are the first to report the identification of compounds 1, 2, and 4 from pear.

Safety of subtotal or total colectomy with primary anastomosis compared to Hartmann procedure for left-sided colon cancer obstruction or perforation

Eun-Do Kim,Jin-Kwon Lee,Jin-Kyu Cho,Jae-Myung Kim,Ji-Ho Park,Ju-Yeon Kim,Sang-Ho Jeong,Young-Tae Ju,Chi-Young Jeong,Eun-Jung Jung,Young-Joon Lee1,Soon-Chan Hong,곽승진 대한종양외과학회 2019 Korean Journal of Clinical Oncology Vol.15 No.2

Purpose: Whether subtotal or total colectomy with primary anastomosis (PA) is safer than Hartmann procedure (HP) for left-sided colon cancer obstruction or perforation remains controversial. The purpose of this study was to compare postoperative morbidity, mortality, and defecation frequency between PA and HP for left-sided colon cancer obstruction or perforation. Methods: This retrospective study enrolled 54 patients from January 2014 to February 2018 who underwent emergency surgery due to left-sided colon cancer obstruction or perforation. Results: PA was carried out in 20 patients while HP was performed for 34 patients. Thirty-day mortality did not show significant difference between the two groups (15.0% vs. 14.7%, P=1.000). No anastomotic leakage occurred in PA group while three (8.8%) cases of stump leakage occurred in HP group. Stoma repair was performed for 13 cases (44.8%) and stoma reformation was performed for one case in HP group (7.7%). Stoma related complications occurred in five cases (17.24%). For patients after stoma repair, defecation frequency at 3 months after operation was 2.91±2.88 times per day in PA group and 2.86±2.63 times per day in HP group. At 1 year after operation, defecation frequency was changed to 1.40±1.12 times per day in PA group and 1.17±0.39 times per day in HP group. Conclusion: Primary ileosigmoid or ileorectal anastomosis for left-sided colon cancer obstruction or perforation is safe, and shows similar outcome of defecation frequency compared to H