http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
대규모 무선 센서 네트워크를 위한 계층적 클러스터 트리 기반 분산 주소 할당 기법
박종준(Jongjun Park),정훈(Hoon Jeong),황소영(Soyoung Hwang),주성순(Seong-Soon Joo) 한국통신학회 2009 韓國通信學會論文誌 Vol.34 No.12b
현재 무선 센서 네트워크의 주소 할당 기법들은 수백 개 이상의 노드로 구성된 대규모 센서 네트워크를 지원함에 있어 한계를 갖고 있다. WSNs 관련 대표적인 표준화 단체인 ZigBee Alliance에서는 균형 트리 기반의 주소 영역을 구성한 후, 트리 구조에 맞추어 네트워크의 주소를 할당하는 분산 주소 할당 기법이 제시되었다. 하지만 일반적으로 실제 배치된 네트워크는 균형 트리 구조를 갖지 않으며 이로 인해 주소의 낭비 및 고갈이 발생한다. 본 논문에서는 이러한 단점을 해결하기 위해 다수의 균형 트리를 동적으로 구성하는 계층적 클러스터 트리 기반 분산 주소 할당 기법을 제시한다. 제안된 방안에서는 16-bit 주소 영역을 클러스터 식별자 영역과 클러스터 내 주소 영역으로 구분하여 각 클러스터 내부에서는 균형 트리 기반 분산 주소 할당 기법을 사용하고, 주소 고갈 발생시에는 동적으로 새로운 클러스터를 형성하여 주소를 할당한다. 시뮬레이션을 통한 성능 분석에서는 제안된 프로토콜이 기존의 기법보다 주소 사용의 효율 및 고아 노드 발생 부분에서 향상된 결과를 보여준다. It is well known that the current wireless sensor networks addressing methods do not work efficiently in networks more than a few hundred nodes. A standard protocol in ZigBee-Standard feature in ZigBee 2007 gives balanced tree based address assignment method with distributed manner. However, it was limited to cover less than hundreds of sensor nodes due to the wasteful use of available address space, because composed sensor networks usually make an unbalanced tree topology in the real deployment. In this paper, we proposed the hierarchical cluster tree based address assignment method to support large and scalable networks. This method provides unique address for each node with distributed manner and supports hierarchical cluster tree on-demand. Simulation results show that the proposed method reduces orphan nodes due to the address exhaustion and supports larger network with limited address space compared with the ZigBee distributed address assignment method defined in ZigBee-Standard feature in ZigBee 2007.
지역 인구의 시공간 변화와 가변적 공간 단위 문제: 제주 지역을 중심으로
박종준 ( Jongjun Park ),윤현위 ( Hyunwi Yun ) (사)아시아문화학술원 2018 인문사회 21 Vol.9 No.6
지방 도시는 극단적으로 낮은 출산율과 높은 고령화로 인해 소멸이 우려되고 있는 상황이다. 제주 지역은 총인구는 증가하고 있지만 국지적으로 다양한 인구 변화를 보이고 있다. 이 연구는 지역의 인구 변화를 파악하기 위해 공간 단위에 따라 결과가 변할 수 있다는 한계를 지적하고, 지역 인구를 파악하기 위한 적절한 공간단위를 제시하는데 목적이 있다. 이를 위해 제주 지역을 대상으로 2010년부터 2017년까지 행정구역 단위별로 인구 변동을 조사 및 분석하였다. 인구증가율, 변동 계수, Moran’s I 등을 통해 가변적 공간 단위 문제를 확인하였다. 동일 지역으로 인식하는 지역도 세부적인 공단 단위별로 다른 결과 값을 확인하였다. 본 연구는 인구를 포함하여 지역분석에서 공간단위에 따른 왜곡 가능성을 지적하고 적정한 공간 단위 적용의 중요성을 강조한다. 다만 분석에서 인구 이동자료를 다루지 못했다는 한계가 존재한다. Local cities face the risk of extinction due to extremely low birth rates and aging population. The total population of Jeju is growing but the population of sub-local is diverse. The purpose of this study is to point out the limit that the result can be changed according to the unit of space in order to grasp the population change of the region and to suggest a suitable unit of space to identify the local population. To do this, we surveyed and analyzed the population change by Jeju area with population growth rate, coefficient of variation, and Moran's I. from 2010 to 2017. This study emphasizes the possibility of distorting according to spatial units in regional analysis including population and emphasizes the importance of applying proper spatial unit. However, this study has a limitation that it can not deal with population movement data in the analysis process.
수동적인 스타형 파장 분할 다중 방식인 광 네트워크에서의 전방송을 위한 최적 전송 스케쥴링
장종준(Jongjun Jang),박영호(Youngho Park),홍만표(Manpyo Hong),위규범(Kyubum Wee),예홍진(Hongjin Yeh) 한국정보과학회 2000 정보과학회논문지 : 시스템 및 이론 Vol.27 No.1
본 논문은 N 개의 노드와 W 개의 파장을 가진 WDM Passive-star형 광 네트워크에서 주기적으로 발생하는 전방송에 대한 패킷 전송 스케쥴링 알고리즘에 관한 것이다. 각각의 노드가 한 개씩의 조율 가능한 송신기와 고정 조율된 수신기를 가지고, 각각의 송신기는 k 개의 파장으로 조율이 가능하다고 가정한다. 조율지연은 송신기가 임의의 파장에서 다른 파장으로 조율하는데 걸리는 시간을 의미하고 한개의 패킷을 전송하는데 걸리는 시간을 단위로 하여 δ(>0)로 나타낸다. 전방송이란 모든 노드가 자기자신을 제외한 다른 모든 노드에 패킷을 전송하는 것을 말하고 전방송시 전송되는 전체 패킷의 개수는 N(N-1)이다. 또한, 최적 전송 스케쥴링이란 전송되어야 하는 모든 패킷이 최소시간 내에 전송될 수 있도록 스케쥴하는 것을 말한다. 본 논문에서 최적 전송 스케쥴에 대한 조건을 제시하고 임의의 N, k, δ(N>k)에 대하여 전방송에 드는 스케쥴링 주기가 max{ [ N/k ] ( N - 1) , kδ+N-1}인 최적 전송 스케쥴링 알고리즘을 제시하도록 한다. This paper is concerned with packet transmission scheduling problem for repeating all-to-all broadcasts in WDM optical passive-star networks in which there are N nodes and k wavelengths. It is assumed that each node has one tunable transmitter and one fixed-tuned receiver, and each transmitter can tune to k different wavelengths. The tuning delay represents the time taken for a transmitter to tune from one wavelength to another and represented as δ(>0) in units of packet durations. We define all-to-all broadcast as the one where every node transmits packets to all the other nodes except itself. So, there are in total N(N-1) packets to be transmitted for an all-to-all broadcast. The optimal transmission scheduling is to schedule in such a way that all packets can be transmitted within the minimum time. In this paper, we propose the condition for optimal transmission schedules and present an optimal transmission scheduling algorithm for arbitrary values of N, k, and δ. The cycle length of the optimal schedules is max{ [ N/k ] ( N - 1), kδ + N - 1 }.
디지털 전사날염으로 프린트 된 QR코드의 인식률 연구 -필라멘트 직물의 섬도와 색의 변화를 중심으로-
박서린 ( Suhrin Park ),김종준 ( Jongjun Kim ) 한국패션비즈니스학회 2016 패션 비즈니스 Vol.20 No.4
This study analyzed the recognition rate of QR codes printed by digital transfer textile printing for mobile application. The purpose was to identify conditions that increase recognition rates of QR codes printed on textile, in order to increase utility of QR codes in the textile and fashion industries. The study focused on differences in the color of the QR codes and denier, which is a unit of textile fineness measurement, of the textile on which the QR codes were printed. And the recognition rates of QR codes according to the color and denier were analyzed. According to the result of this study, the colors of QR codes had an effect on the recognition of the codes by mobile applications. Specifically, strong contrast, i.e., bright background and relatively dark module, increased the recognition rate of the QR codes. Digital transfer textile printing tend to change the hue of red and yellow and increase brightness, and change in the printed colors also had an effect on the recognition rate of QR codes. There was a clear difference in the color and recognition rate of the printed QR code according to the denier of the textile, and this suggests denier has an effect on the recognition rate. The findings in this study can provide basic data for future research on QR codes digital printed on textile.