Correlations Between Fasciology and Yin Yang Doctrine

Hui Tao,Mei-chun Yu,Hui-ying Yang,Rong-mei Qu,Chun Yang,Xin Zhou,Yu Bai,Jing-peng Wu,Jun Wang,Ou Sha,Lin Yuan 사단법인약침학회 2011 Journal of Acupuncture & Meridian Studies Vol.4 No.2

The aim of this study is to explore the correlations between fasciology and yin yang doctrine. Professor Yuan developed fasciology by three-dimensional reconstruction of connective tissue (fascia) in the trunk and limbs of the human body and tracing back to tissue origins in light of biological evolution and developmental biology. Fasciology states that the human body can be divided into two systems: the supporting-storing system and the functional system. This article elaborates on the roles of the two systems and their mutual relationship. The two systems are used to analyze the yin,the yang, and their relationship. The two systems are promoted but also restricted in different contexts. The supporting-storing system is formed by undifferentiated connective tissue and provides undifferentiated cells and nutrients for differentiated cells of the functional system. Thus, the supporting-storing system could be classified as quiet, similar to yin. The functional system continuously maintains the various functional activities of the human body. Thus, the functional system could be classified as active, similar to yang. In interpreting the yin yang doctrine from the point of view of fasciology, yin can be compared with the supporting-storing system and yang can be compared with the functional system.

Expression Profile and Potential Roles of EVA1A in Normal and Neoplastic Pancreatic Tissues

Tao, Ming,Shi, Xue-Ying,Yuan, Chun-Hui,Hu, Jia,Ma, Zhao-Lai,Jiang, Bin,Xiu, Dian-Rong,Chen, Ying-Yu Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.1

Background: EVA1A (eva-1 homolog A) is a novel gene that regulates programmed cell death through autophagy and apoptosis. Our objective was to investigate the expression profiles and potential role of EVA1A in normal and neoplastic human pancreatic tissues. Materials and Methods: The expression pattern of EVA1A in normal pancreatic tissue was examined by indirect immunofluorescence and confocal microscopy. Protein levels in paraffin-embedded specimens from normal and diseased pancreatic and matched non-tumor tissues were evaluated by immunohistochemistry. Results: EVA1A colocalized with glucagon but not with insulin, demonstrating production in islet alpha cells. Itwas strongly expressed in chronic pancreatitis, moderately or weakly expressed in the plasma membrane and cytoplasm in pancreatic acinar cell carcinoma, and absent in normal pancreatic acinar cells. Although the tissue architecture was deformed, EVA1A was absent in the alpha cells of pancreatic ductal adenocarcinomas, intraductal papillary mucinous neoplasms, mucinous cystadenomas, solid papillary tumors and pancreatic neuroendocrine tumors. Conclusions: EVA1A protein is specifically expressed in islet alpha cells, suggesting it may play an important role in regulating alpha-cell function. The ectopic expression of EVA1A in pancreatic neoplasms may contribute to their pathogenesis and warrants further investigation.

Effect of Deep Cryogenic Treatment on Machinability and Wear Mechanism of TiAlN Coated Tools during Dry Turning

Hui-Bo He,Wen-Qiang Han,Hua-Ying Li,Dong-Yang Li,Jun Yang,Tao Gu,Tao Deng 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.

TiAlN coatings were deposited on the YT15 tungsten carbide inserts by magnetron sputtering technique. The TiAlN coated tools weredeep cryogenic treatment (DCT) at -196oC for 30 h. The dry turning tests of 40Cr steel were carried out to evaluate performancesof uncoated, no cryogenically treated (NCT) and DCT coated tools on the CA6140A lathe. The effect of the three kinds of tools oncutting forces, cutting temperature, surface qualities and tool wear had been investigated to assess the performance of DCT coatedtools. Results of the investigation showed that the cutting forces and cutting temperature obtained by DCT coated tools weresignificantly decreased in comparison with the uncoated and NCT coated tools, especially at higher cutting speeds. Flank wear ofthe DCT coated inserts was less than that of the NCT coated inserts under the same cutting conditions. The DCT coated insertsproduced a good surface finish and yield a tool life of about 65 min. The wear mechanisms of the DCT coated carbide tools are mainlyabrasive and adhesive wear, accompanied with diffusion and oxidation wear.

Adaptive compensation method for real-time hybrid simulation of train-bridge coupling system

Hui M. Zhou,Bo Zhang,Xiao Y. Shao,Ying P. Tian,Wei Guo,Quan Gu,Tao Wang 국제구조공학회 2022 Structural Engineering and Mechanics, An Int'l Jou Vol.83 No.1

Real-time hybrid simulation (RTHS) was applied to investigate the train-bridge interaction of a high-speed railway system, where the railway bridge was selected as the numerical substructure, and the train was physically tested. The interaction between the two substructures was reproduced by a servo-hydraulic shaking table. To accurately reproduce the high-frequency interaction responses ranging from 10-25Hz using the hydraulic shaking table with an inherent delay of 6-50ms, an adaptive time series (ATS) compensation algorithm combined with the linear quadratic Gaussian (LQG) was proposed and implemented in the RTHS. Testing cases considering different train speeds, track irregularities, bridge girder cross-sections, and track settlements featuring a wide range of frequency contents were conducted. The performance of the proposed ATS+LQG delay compensation method was compared to the ATS method and RTHS without any compensation in terms of residual time delays and root mean square errors between commands and responses. The effectiveness of the ATS+LQG method to compensate time delay in RTHS with high-frequency responses was demonstrated and the proposed ATS+LQG method outperformed the ATS method in yielding more accurate responses with less residual time delays.

The impacts of LPCVD wrap-around on the performance of n-type tunnel oxide passivated contact c-Si solar cell

Zhou Ying,Tao Ke,Liu Aimin,Rui Jia,Bao Jianhui,Sun Yufeng,Yang Sanchuan,Wang Qinqin,Zhang Qiang,Yang Songbo,Cao Yujia,Qu Hui 한국물리학회 2020 Current Applied Physics Vol.20 No.7

In this paper, Tunnel Oxide Passivated Contact (TOPCon) silicon solar cells with the industrial area (244.32 cm2) are fabricated on N-type silicon substrates. Both the ultra-thin tunnel oxide layer and phosphorus doped polycrystalline silicon (polysilicon) thin film are prepared by the LPCVD system. The wrap-around of polysilicon is observed on the surface of borosilicate glass (BSG). The polysilicon wrap-around can form a leakage current path, thus degrades the shunt resistance of solar cells, and leads to the degradation of solar cell efficiency. Different methods are adopted to treat the polysilicon wrap-around and improve shunt resistance of solar cells. The experimental results indicate that a chemical etching method can effectively solve the problem of polysilicon wrap-around and improve the performance of solar cells. Finally, a conversion efficiency of 22.81% has been achieved by our bifacial TOPCon solar cells, with Voc of 702.6 mV, Jsc of 39.78 mA/cm2 and FF of 81.62%.

A Study on Cutting and Tribology Performances of TiN and TiAlN Coated Tools

Hua-Ying Li,Hui-Bo He,Wen-Qiang Han,Jun Yang,Tao Gu,Yuan-ming Li,류성기 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

TiN and TiAlN coatings were deposited on the surface of AISI 5140 steel and cemented carbide YT15 by magnetron sputteringtechnique (MSP). The reciprocating sliding tests of TiN and TiAIN coatings on the surface of AISI 5140 steel were performed toinvestigate the friction coefficients of coatings affected by various normal loads with friction pair of 304 stainless steel balls. Drymachining tests on AISI 5140 hardened steel were carried out with the TiN and TiAlN coated tools on a CA6140A lathe. The effectsof cutting speed on cutting forces and surface roughness of TiN and TiAlN coated tools were obtained and analyzed to assess thecutting performance of coated tools. The microcosmic micrographs of wear areas of coated tools were observed and investigated byscanning electron microscope and energy dispersive spectrum. The results show that the friction coefficients of TiN coatings are lowerthan that of TiAlN coatings. The cutting force of TiAlN coated tool decreases and flank wear resistance enhances in comparison withTiN coated tool. The wear form and mechanisms of TiN coated tool are mainly crater wear on the rake face and adhesive wear andabrasive wear on the flank face. The wear form and mechanisms of TiAlN coated tool are mainly adhesive wear, the breakage ofcutting edge and the damage of tip, accompanied with diffusion and oxidation wear.

In Vitro and In Vivo Study on the Effect of Lysosome-associated Protein Transmembrane 4 Beta on the Progression of Breast Cancer

Deyou Tao,Junqing Liang,Yihong Pan,Yanting Zhou,Ying Feng,Lin Zhang,Jingjing Xu,Hui Wang,Ping He,Jie Yao,Yang Zhao,Qinjie Ning,Wen Wang,Wei Jiang,Jing Zheng,Xia Wu 한국유방암학회 2019 Journal of breast cancer Vol.22 No.3

Purpose: Although the effect of lysosome-associated protein transmembrane 4 beta (LAPTM4B) on the proliferation, migration, and invasion of breast cancer (BC) cells has already been studied, its specific role in BC progression is still elusive. Here, we evaluated the effect of different levels of LAPTM4B expression on the proliferation, invasion, adhesion, and tumor formation abilities of BC cells in vitro, as well as on breast tumor progression in vivo. Methods: We investigated the influence of LAPTM4B expression on MCF-7 cell proliferation, invasion, adhesion, and tube formation abilities in vitro through its overexpression or knockdown and on breast tumor progression in vivo. Results: Cell growth curves and colony formation assays showed that LAPTM4B promoted the proliferation of breast tumor cells. Cell cycle analysis results revealed that LAPTM4B promoted the entry of cells from the G1 into the S phase. Transwell invasion and cell extracellular matrix adhesion assays showed that LAPTM4B overexpression increased the invasion and adhesion capabilities of MCF-7 cells. More branches were observed in MCF-7 cells overexpressing LAPTM4B under an electron microscope. In comparison with LAPTM4B overexpression, LAPTM4B knockdown decreased the expression of vascular endothelial growth factor-A and significantly inhibited the vasculogenic tube formation ability of tumors. These results were also verified with western blot analysis. Conclusion: LAPTM4B promoted the proliferation of MCF-7 cells through the downregulation of p21 (WAF1/CIP1) and caspase-3, and induced cell invasion, adhesion, and angiogenesis through the upregulation of hypoxia-inducible factor 1 alpha, matrix metalloproteinase 2 (MMP2), and MMP9 expression. This specific role deems LAPTM4B as a potential therapeutic target for BC treatment.

The Presence of Open Dentinal Tubules Affects the Biological Properties of Dental Pulp Cells Ex Vivo

Mei-Ying Shao,Zhong-Sen Fu,Ran Cheng,Hui Yang,Li Cheng,Feng-Ming Wang,Tao Hu 한국분자세포생물학회 2011 Molecules and cells Vol.31 No.1

To investigate the effects of open dentinal tubules on the morphological and functional characteristics of dental pulp cells. Morphological changes in human dental pulp cells that were seeded onto dentin discs with open den-tinal tubules were investigated on days 1, 2, 4, and 10 of culture using scanning electron microscopy and fluores-cence microscopy. Samples collected on days 1, 3, 6, 8, and 10 of culture were evaluated for cell proliferation rate and alkaline phosphatase activity. Cultured human dental pulp cells developed a columnar or polygonal morphology and monopolar cytoplasmic processes that extended into the dentinal tubules. The cells formed a multilayer and secreted an extracellular matrix onto the cell surface. Scanning electron microscopy and fluorescence microscopy revealed polarized organization of odontoblasts. Cells seeded onto dentin discs prolifer-ated minimally but showed high levels of ALP activity. Dental pulp cells seeded onto treated dentin discs develop an odontoblast-like phenotype, which may be a potential alternative for use in experimental research on dentinogenesis.

Anti-proliferation Effects of Interferon-gamma on Gastric Cancer Cells

Zhao, Ying-Hui,Wang, Tao,Yu, Guang-Fu,Zhuang, Dong-Ming,Zhang, Zhong,Zhang, Hong-Xin,Zhao, Da-Peng,Yu, Ai-Lian Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.9

IFN-${\gamma}$ plays an indirect anti-cancer role through the immune system but may have direct negative effects on cancer cells. It regulates the viability of gastric cancer cells, so we examined whether it affects their proliferation and how that might be brought about. We exposed AGS, HGC-27 and GES-1 gastric cancer cell lines to IFN-${\gamma}$ and found significantly reduced colony formation ability. Flow cytometry revealed no effect of IFN-${\gamma}$ on apoptosis of cell lines and no effect on cell aging as assessed by ${\beta}$-gal staining. Microarray assay revealed that IFN-${\gamma}$ changed the mRNA expression of genes related to the cell cycle and cell proliferation and migration, as well as chemokines and chemokine receptors, and immunity-related genes. Finally, flow cytometry revealed that IFN-${\gamma}$ arrested the cells in the G1/S phase. IFN-${\gamma}$ may slow proliferation of some gastric cancer cells by affecting the cell cycle to play a negative role in the development of gastric cancer.

A Study on Cutting and Tribology Performances of TiN and TiAlN Coated Tools

Li, Hua-Ying,He, Hui-Bo,Han, Wen-Qiang,Yang, Jun,Gu, Tao,Li, Yuan-ming,Lyu, Sung-Ki Korean Society for Precision Engineering 2015 International Journal of Precision Engineering and Vol.16 No.4

TiN and TiAlN coatings were deposited on the surface of AISI 5140 steel and cemented carbide YT15 by magnetron sputtering technique (MSP). The reciprocating sliding tests of TiN and TiAIN coatings on the surface of AISI 5140 steel were performed to investigate the friction coefficients of coatings affected by various normal loads with friction pair of 304 stainless steel balls. Dry machining tests on AISI 5140 hardened steel were carried out with the TiN and TiAlN coated tools on a CA6140A lathe. The effects of cutting speed on cutting forces and surface roughness of TiN and TiAlN coated tools were obtained and analyzed to assess the cutting performance of coated tools. The microcosmic micrographs of wear areas of coated tools were observed and investigated by scanning electron microscope and energy dispersive spectrum. The results show that the friction coefficients of TiN coatings are lower than that of TiAlN coatings. The cutting force of TiAlN coated tool decreases and flank wear resistance enhances in comparison with TiN coated tool. The wear form and mechanisms of TiN coated tool are mainly crater wear on the rake face and adhesive wear and abrasive wear on the flank face. The wear form and mechanisms of TiAlN coated tool are mainly adhesive wear, the breakage of cutting edge and the damage of tip, accompanied with diffusion and oxidation wear.