http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Glass-cloth/Polyester 복합 절연재료의 유전특성에 관한 연구 : 최적 제작 조건 규명 For Fabrication condition of optimum
황영한,이종호,이규철 울산대학교 1993 공학연구논문집 Vol.24 No.1
폴리에스테르 수지의 물성특성, 유전특성 및 전기적 측면에서 최적의 경화 조건을 규명한 다음 이러한 폴리에스테르 수지의 최적 경화 조건을 적용한 유리섬유강화 복합재료(Glass-cloth/Polyester Composite Materials)의 최적 제작조건 및 계면 활성제의 효과에 대한 연구를 행하였다. 본 연구의 실험결과로부터 다음과 같은 사실을 추출할 수 있었다. (1) 폴리에스테르 수지의 경화조건은 물성특성 및 유전특성에 커다란 영향을 미치고 있음을 알수 있엇다. (2) 폴리에스테르 수지의 최적의 경화조건은 120℃에서 2시간 1차 경화를 행한 후, 200℃에서 13시간 2차경화를 행한 시료에서 얻어 졌다. (3) 복합 절연재료 제작에 있어 계면 결합제의 인장특성은 약 2배 정도의 효과가 나타남을 알 수 있었다. (4) 전기적 및 기계적특성의 관점에서, Glasscloth/Polyester 복합 절연재료의 최적 제작조건은 복합 절연재료를 120℃에서 2시간 1차 경화를 행한 후, 200℃에서 약 10시간 2차 경화를 행한 경우이다. The optimum curing condition of polyester resin for good mechanical, dielectric and electrical properties was investigated. With the obtained curing condition applied, the optimum fabrication condition and the effect of silane coupling agent for Glass-cloth/polyester composite materials were also studied. The following results were obtained. (1) it is found that curing condition of polyester resin affected physical and dielectric properties. (2) The optimum conditions for fabrication of polyester resin was obtained as post-curing at 200℃ for 13 hours after curing at 120℃ for 2 hours. (3) In the fabrication of composite insulating materials, electrical propreties were improved by about 10% and mechanical tensile properties about two times in the sample with 0.2% water solution of epoxy silane coupling agent treatment as compared eith the case without epoxy silane coupling agent treatment. (4) From the view point of electrical and mechanical properties, optimum conditions for fabrication of Glass-cloth/polyester composite insulating materials were found as post-curing at 200℃for about 10 hours after curing at 120℃ for 2 hours.
플라즈마 표면처리 기법에 의한 무기절연물 표면상의 젖음성 향상에 관한 연구
이종호,엄무수,황영한 울산대학교 1994 공학연구논문집 Vol.25 No.2
본 연구는 유리섬유 강화 복합재료(GFRP)의 최적제작조건을 규명하기 위한 기초연구로서, 플라즈마 발생장치의 최적조건을 규명하고, 에폭시 수지와 유리섬유 사이의 계면현상을 표면처리 조건에 따라 각각 접촉각 변화과정을 측정하였다. GFRP의 필라(filler)표면처리는 열처리, 실란 결합제 처리, 플라즈마 처리를 했고 플라즈마를 발생시키기 위한 주위환경은 공기로 했다. 표면처리 한 무기절연물 표면에서 에폭시 수지상의 접촉각은 표면처리 조건에 따라 다르게 나타났고 특히, 플라즈마 처리시간과 전기로 내부 주위온도에 크게 영향을 받고 있음을 알 수 있었다. 본 연구에서 플라즈마 처리시간과 전기로 내부 주위온도의 관점에서 80℃일때는 3분, 100℃일때는 4분, 120℃일때는 5분일때 접촉각 특성이 가장 우수하게 나타남을 알 수 있었다. With the contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as a simple model of glass fiberreinforced composite materials(GFRP). The contact angle on the inorganic filler surface varied with surface treatment conditions . The contact angle significantly depends on plasma treating time and environment temperature of the oven. From the view point of plasma treatment condition in this work, optimum treatment time were proved as 3, 4 and 5 minutes for the treatment temperatures of 80℃, 100℃ and 120℃, respectively.
플라즈마를 이용한 유리섬유강화 복합절연재료의 표면처리에 관한 연구
이규철,남창우,김희대,황영한,김경석 울산대학교 1997 공학연구논문집 Vol.28 No.1
본 연구에서는 에폭시계 복합 절연재료 Glass-cloth/Epoxy 의 계면 접착특성을 향상시키기 위하여 표면처리 조건에 따라 각각 복합 절연재료를 제작하였고, 전기·기계적특성의 상관관계를 다음과 같은 실험을 행하여 비교하였다. Glass의 젖음의 정도를 평가하기 위하여 표면처리 조건에 따라 주위온도 80[℃]에서 접촉각을 측정하였고, 주위온도 및 인가전압을 변화시키면서 비유전율(εr), 유전정접(tanδ) 및 전기적 절연강도를 측정하였다. 기계적 특성을 측정한 후에 파단면의 형상을 SEM으로 분석, 검토하였다. 실험 결과, (1) 주위온도가 상승함에 따라 비유전율 및 유전정접은 증가하였고, 전기적 절연강도는 감소하였으며 플라즈마 처리함으로서 전기·기계적특성은 전반적으로 향상되었다. (2) 접촉각 측정 주위온도가 80[℃]일 때, 표면처리 조건에 따른 젖음성은 각각 다르게 나타났고 플라즈마 처리효과는 표면세정, 미세요철, 표면대전 및 젖음성의 감소와 같은 복합효과로 볼 수 있다. (4) 전기·기계적특성의 관점에서 복합 절연재료의 경화온도가 80[℃]일 때, Glass-cloth/Epoxy복합 절연재료의 최적처리시간은 3분 정도로 나타났다. The Glass-cloth/Epoxy composite insulating materials for this study have been prepared with several different surface treatmenttechniquen such as untreatment ultrasonic treatment and plasma treatment, and their electrical and mechanical characteristics have been compared each other. It has been found that plasma-treated glass has the smallest contact angle with a drop of epoxy. The plasma-treated composite materials have superior dielectric strength and mechanical tensile-strength compared to the materials subjected to other surface treatments. Also, the experiment showed that there exists an optimum plasma treatment duration for improving the interfacial characteristics of the composite insulating materials. The optimum plasma treatment durations are about 3 minutes for Glass-cloth/Epoxy at 80[℃]. Longer plasma treatment has been appeared to degrade the interfacial characteristics.
Han, Jin-Yeong,Goh, Rhee Young,Seo, Su Yeong,Hwang, Tae Ho,Kwon, Hyuk Chan,Kim, Sung Hyun,Kim, Jae Seok,Kim, Hyo Jin,Lee, Young Ho KOREAN ACADEMY OF MEDICAL SCIENCE 2007 JOURNAL OF KOREAN MEDICAL SCIENCE Vol.22 No.2
<P>Mesenchymal stem cells (MSC) are multipotent in nature and believed to facilitate the engraftment of hematopoietic stem cells (HSC) when transplanted simultaneously in animal studies and even in human trials. In this study, we transfected culture-expanded MSC with granulocyte macrophage-colony stimulating factor (GM-CSF) and stem cell factor (SCF) cytokine genes and then cotransplanted with mononuclear cells (MNC) to further promote HSC engraftment. MNC were harvested from cord blood and seeded in long-term culture for ex vivo MSC expansion. A total of 1×10<SUP>7</SUP> MNC plus MSC/µL were introduced to the tail vein of nonobese diabetic/severe combined immunodeficiency mice. After 6-8 weeks later, homing and engraftment of human cells were determined by flow cytometry and fluorescence in situ hybridization studies. The total nucleated cell count and the engraftment of CD45+/CD34+ cells and XX or XY positive human cells were significantly increased in cotransplanted mice and even higher with the cytokine gene-transfected MSC (GM-CSF>SCF, <I>p</I><0.05) than in transplantation of MNC alone. These results suggest that MSC transfected with hematopoietic growth factor genes are capable of enhancing the hematopoietic engraftment. Delivering genes involved in homing and cell adhesions, CXCR4 or VLA, would further increase the efficiency of stem cell transplantation in the future.</P>
대한간학회지 제2차 춘계학술대회 초록집 : 한국인 간질환 환자에서 G 형 간염 바이러스 감염
한광협 ( Han Gwang Hyeob ),박영년 ( Park Yeong Nyeon ),최원 ( Choe Won ),황영웅 ( Hwang Yeong Ung ),류왕식 ( Lyu Wang Sig ),오승희 ( O Seung Hui ),이관식 ( Lee Gwan Sig ),전재윤 ( Jeon Jae Yun ),문영명 ( Mun Yeong Myeong ),강진경 대한간학회 1996 Clinical and Molecular Hepatology(대한간학회지) Vol.2 No.2(S)