CFT용 초고강도 콘크리트를 이용한 실물대 실험

손영준,송인명,양동일,정근호,정상진,최문식 대한건축학회 2004 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.24 No.1(구조계)

The column for Steel Framed Reinforced Concrete Structure (SFRCS) and the column for Reinforced Concrete Structure (RCS) could be the most common building structure. The increasing of the need for massive space hasaffected the size of building components for supporting the massive structure. However, the changing of components size makes inefficient space of building. Hence, to meet the need for acquiring efficient space comparing the budget and cost the new structure method, Concrete Filled Tube Steel (CFT), was developed. CFT is the structure for which steel tube instead of other materials such as wood for holding concrete is used. The most benefit of this one is to help in reducing the size of the building components and local buckling because of tube steel holding concrete. For this reason, this research will examine the probability of applying CFT on construction sites by using the concrete (800kg/cm2) especially for CFT through the data from the real size mock-up.

이온교환체로서 Polyphenylene Sulfide Sulfonic Acid에 관한 연구

전병광,손원근,서구원,맹학영,김동철,송해영 충남대학교 공업교육연구소 1994 論文集 Vol.17 No.1

Sulfonated poly(phenylene sulfide)(S-PPS) was prepared by the reaction of poly(phenylene sulfide)(PPS) with fuming sulfuric acid. The sulfonation was confirmed by the high intensity band of the SO_3H group at 1190 cm^-1. Thermally crosslinked S-PPS was used for a cation exchange polymer with high thermal stability. The ion exchange capacity of soluble S-PPS(H-form) and insoluble S-PPS(H-form) was 5.16meq/g and 3.50meq/g, respectively. The ion exchange capacity and IR absorbance at 1190cm^-1 of S-PPS were decreased as the curing temperature was increased.

최종공사비 예측을 위한 적정 성과지수 선정 및 검증

손보식,이동준,이현수 대한건축학회 2005 大韓建築學會論文集 : 構造系 Vol.21 No.2

Using EVMS can probably cause lots of confusion under the different systems and different circumstances of the construction industry between Korea and the United States, because the United States has wide experience in applying to EVMS during several decades but Korea has not. Therefore this research deals with the problem about Performance Indices in forecasting EAC(Estimate at Completion) among the problems of using EVMS. It was verified the newly proposed method on an apartment construction project having relatively sufficient performance data in order to select the most satisfactory performance index to be used in domestic construction projects. Based on the result of statistical method obtained through the adequacy analysis and confidence analysis, the 0.8CPIC+0.2SPIC, which is used in the United States, was found to be suitable for Korea. The methodology may be applied in other construction types as well.

자동차차체 및 부품제조업 산업장의 작업환경실태에 관한 조사 연구

서준호,문덕환,김정호,이채관,황용식,손병철,김대환,이창희,김휘동,이채언 인제대학교 백병원 2002 仁濟醫學 Vol.23 No.5

Objectives: For the purpose of preparing the fundamental data and control the working environment and assessing the status of working environmental in manufacturing industry of bodies for motor car and of parts. Methods and Materials: Accessories for motor car and its engines the auther measured the noise level, concentration of dust, heavymetals, organic solvents, chemicals to 99 industries(24 working processes) form Feb. 2000 to Oec. 2000. Results: The results were as follows : 1. Mean noise level cutting, grinding, pressing, foundries and shot-blast was exceeded to threshold limit value(TLV) of noise. 2. Mean concentration of total dust was not exceeded to TLV. 3. Mean concentration of Mn in welding process and Pb in drying, welding, fabricating, rolling was exceeded to TLV. 4. Mean concentration for chemicals and organic solvents were not exceeded to TLV. 5. Mean concentration of dust and heavymetals were statistical significant difference between with local ventilation system and without local ventilation system. Conclusion: Above results, author suggest to prepare more passively control to working environment where exceeded the TLV.

고속방사에 의해 제조된 PEN 필라멘트의 특성 : 방사속도에 따른 영향 Effects of Take-up Velocities

지동선,손준식 단국대학교 2001 산업기술연구 Vol.2 No.-

Polyethylene 2,6-naphthalate(PEN) filament by high-speed melt spinning was prepared at the take-up velocities of 1∼7 ㎞/min. The changes of the structure and physical properties caused by various take-up velocities were studied by measuring density, birefringence, x-ray diffraction, DSC, and tensile behavior. The PEN filament at high take-up velocities were show very different structure formation and properties. The orientation, especially in crystalline phase, was developed with the increase of take-up velocity. The physical properties(i.e. density, crystallinity, birefringence melting temperature, heat of fusion, tensile strength, tensile modulus)of the PEN filaments were increased with increasing of take-up velocities. These increasing tendencies were markedly appeared at the take-up velocities of 4∼7 ㎞/min by conditions due to suddenly orientation of shin molecules. The existence of extended non-crystalline molecules in the PEN filaments was appeared at take-up velocity about 4∼7 ㎞/min. It was found that they formed crystal at take-up velocity 7 ㎞/min, and their crystal

소득작물 전후작지 적응 극단기성 벼 ‘중모 1032’

손영보,이종희,조준현,이지윤,오성환,송유천,박동수,박노봉,김상열,여운상,남민희,권영업 忠北大學校 農業科學硏究所 2015 農業科學硏究 Vol.31 No.2

보리등겨로 제조한 간장의 향기성분

권오준,이은정,최웅규,손동화,이석일,정연건,지원대 한국위생과학회 2002 한국위생과학회지 Vol.8 No.2

새로운 장류제품으로서 보리등겨의 이용방안을 모색하기 위하여 간장을 만들어 연구하였다. 보리로 제조한 간장의 갈색화는 점차적으로 증가 하였으며 완만한 변화를 보였다. 향기성분으로는 4-vinyl-2-methoxy-phenol, benzeneacetaldehyde, palmitic acid, 2-furancatboxaldehyde, methyl-9, 12-octadecadienoate, di-(2-ethylhexyl)phthalate, diethyl phtalate, dibytyl-1,2-benzenedicatboxylate, 5-methyl-2-furancarboxaldehyde, 3,4-dimethyl-1h-pyrazole, phenylethyl alcohol, dioctyl-hexanedioate, dimethyl-1,2-benzenedicatboxylate, benzaldehyde, methional, 2-methoxy-phenol, n-furfurylidene-3-methylbutyl amine, 1-furfuryl-2-formyl pyrrole, tetradrcanoic acid, 5-methyl-pyrimidine, 4-methyl-5-hydroxymethyl-imidazole, maltol, 5-(5-methyl-2-furanyl)methyl-2-furancarboxaldehyde 순으로 높은 함량을 차지 하였다. For investigation of new utilization as jang-products, kanjang was prepared using barely bran. This study was conducted to investigate flavor components of kanjang during fermentation time. The optical density was gradually increased. Among the flavor components identified in kanjang made with barley bran, the contents of 4-viny1-2-methoxy-phenol was the most in quantity followed by benzeneacetaldehyde, palmitic acid, 2-furancarboxaldehyde, methyl-9,12-octadecadienoate, di-(2-ethylhexyl)phthalate, diethyl phtalate, dibutyl-1,2-benzendicarboxylate, 5-methyl-2-furancarboxaldehyde, 3,4-dimethyl-1h-pyrazole, phenylethyl alcohol, dioctyl-hexanedioate, dimethyl-1,2-benzenedicarboxylate, benzaldehyde, methional, 2-methoxy-phenol, n-furfurylidene-3-methylbutyl amine, 1-furfuryl-2-formyl pyrrole, tetradecanoic acid, 5-methyl-pyrimidine, 4-methyl-5-hydroxymethyl-imidazole, maltol and 5-(5-methyl-2-furanyl)methyl-2-furancarboxaldegyde.

뇌졸중 및 뇌손상 환자의 경관 유동식이에섬유소 첨가시 설사에 대한 효과

전세일,김동아,온석훈,조성래,서정훈,윤태준,유성,전중선,김정남,윤지영 大韓再活醫學會 2000 Annals of Rehabilitation Medicine Vol.24 No.5

열대 지역에서 통일형 초다수성 벼 품종의 생육 및 수량성 비교

이지윤,준현,성환,손영보,송유천,한상익,박동수,권영업,이철원,이종희 忠北大學校 農業科學硏究所 2015 農業科學硏究 Vol.31 No.2

양전자방출단층촬영을 이용한 초점주의와 작동기억의 뇌 활성화 양상 비교

김재진,조상수,김명선,손정우,이재성,이동수,이명철,권준수 大韓神經精神醫學會 2001 신경정신의학 Vol.40 No.2

연구목적: 단순 초점주의 과제와 보다 고도의 집중을 요하는 작동기억 과제를 수행하는 동안의 뇌 활성화 양상을 비교하여, 두 인지기능 과정을 매개하는 정상적 신경회로의 특성과 차이를 알아보는 것을 목적으로 하였다. 방법: 정상인 14명을 대상으로 시각처리 대조 과제, 단순 초점주의 과제, 작동기억 과제 등 세 가지 인지과제를 주고, 과제 수행 동안 [□O]H₂O를 추적자로 한 양전자방출단층활영을 실시한 후 감산분석을 통해 초점주의와 작동기억의 신경회로 지도를 작성하여 비교분석하였다. 결과: 초점주의 동안 활성화되는 부위는 좌측으로 편측화되고 산발적으로 분포하는 양상이었고, 특히 전대상이랑과 운동영역을 포함한 전두엽, 일차 및 이차 시각피질 등의 활성화가 특징적이었다. 작동기억 동안의 뇌 활성화 역시 산발적 분포와 좌측 편측화 양상이 관찰되었으나, 시각피질보다는 전두엽의 활성화가 우세하였고, 특히 우측 전대상이랑의 현저한 활성화가 특징적이었다. 결론: 초점주의와 작동기억은 개념적으로 공통점과 차이점을 내포하고 있는 것처럼 매개 신경회로에서도 공통 혹은 특이한 영역을 각각 가지며, 전대상이랑의 역할이 두 기능에 공통적으로 중요하고, 이차 시각피질과 전전두피질이 두 기능 각각에 더 중요하게 작용하는 것 같다. Objectives:This study was undertaken to identify neural substrates for simple focused attention and more highly-focused working memory i normal people and investigate their characteristics and differences. Method: Fourteen normal subjects were studied with [□O]H₂O positron emission tomography during a visual processing baseline task, simple focused attention task and working memory task. Results were analyzed with the subtraction analysis to map the neural correlates of focused attention and working memory. Results: Activated areas during focused attention tended to be lateralized to the left and scattered over various regions including the anterior cingulate, motor area, and primary and secondary visual cortices. While the areas activated during working memory also show the left lateralization and scattered distribution, activation prevailed more in the frontal lobe than in the visual cortex, and was particularly remarkable in the right anterior cingulate. Conclusions: Focused attention and working memory do not have only conceptually commonalities and differences but also have common and specific areas in their neural substrates. The anterior cingulate may commonly play an important role in both cognitive functions, whereas secondary visual cortex and prefrontal cortex seem to be predominantly implicated in each function, respectively.