http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
( Tae Jun Park ),( Keun Soo Ahn ),( Yong Hoon Kim ),( Hyungseop Kim ),( Ui Jun Park ),( Hyoung Tae Kim ),( Won Hyun Cho1 ),( Woo Hyun Park ),( Koo Jeong Kang ) 대한간학회 2014 Clinical and Molecular Hepatology(대한간학회지) Vol.20 No.1
Hepatopulmonary syndrome (HPS) is a serious complication of end-stage liver disease, which is characterized by hypoxia, intrapulmonary vascular dilatation, and liver cirrhosis. Liver transplantation (LT) is the only curative treatment modality for patients with HPS. However, morbidity and mortality after LT, especially in cases of severe HPS, remain high. This case report describes a patient with typical findings of an extracardiac pulmonary arteriovenous shunt on contrast-enhanced transesophageal echocardiography (TEE), and clubbing fingers, who had complete correction of HPS by deceased donor LT. The patient was a 16-year-old female who was born with biliary atresia and underwent porto-enterostomy on the 55th day after birth. She had been suffered from progressive liver failure with dyspnea, clubbing fingers, and cyanosis. Preoperative arterial blood gas analysis revealed severe hypoxia (arterial O2 tension of 54.5 mmHg and O2 saturation of 84.2%). Contrast-enhanced TEE revealed an extracardiac right-to-left shunt, which suggested an intrapulmonary arteriovenous shunt. The patient recovered successfully after LT, not only with respect to physical parameters but also for pychosocial activity, including school performance, during the 30-month follow-up period. (Clin Mol Hepatol 2014;20:76-80)
( Hyun Young Woo ),( Jeong Won Jang ),( Sang Gyune Kim ),( Chang Hyeong Lee ),( Tae Yeob Kim ),( Won Young Tak ),( Sung Kyu Choi ),( Mong Cho1 ),( Jong Young Choi ) 대한간학회 2012 춘·추계 학술대회 (KASL) Vol.2012 No.-
Background: Cirrhosis-related complications are indications for transplantation. However, the mode of complication has not been evaluated so far. To better address this issue, we investigated the mode of cirrhosis related complication and impact of these complications on survival in prospective, multicenter, inception cohort study of subjects with liver cirrhosis presenting with the first onset of decompensated complication. Methods: In this observational study, 1515 patients with the confirmed onset time of the first decompensated complication were enrolled. The mortality risk of cirrhosis-related complications, including ascites, portal hypertensive gastrointestinal bleeding (PHGB), spontaneous bacterial peritonitis (SBP), hepatic encephalopathy (HE), hepatorenal syndrome (HRS), was analyzed in these cirrhotic patients. Result: As the first complication, ascites was the most frequent (53.8%), followed PHGB (36.2%), HE (7.6%), SBP (1.7%) and HRS (0.7%). During follow-up (mean 32±47 months), 484 (31.9%) experienced subsequent decompensations and the proportion of subsequent complication was consistently changed; the proportion of HE, SBP, HRS increased as time progressed. The interval between subsequent decompensative events was progressively shortened. The mortality rate according to the first complication was as follows; Ascites =PHGB> HE=SBP>HRS. The mortality rate of patients experienceing subsequent complication was significantly higher than those without subsequent complication. According to the kinds of subsequent complication, survival of HE was also higher than HRS but lower than ascites or PHGB and similar to that of SBP and this difference of survival disappeared after repeated complication. Conclusion: The mortality risk correlated with initial complication and the risk increases as the number of complication episodes is repeated. Patient`s mean age was 56±11.50 years and 72.1% was male. The cause of liver cirrhosis is hepatitis B virus (38.6%), alcohol (35.5%) and hepatitis C virus (8.9%).
석탄 가스화를 통한 전력 생산과 DME 병산 공정에 대한 기초 경제성 분석
유영돈 ( Young Don Yoo ),김수현 ( Su Hyun Kim ),조원준 ( Won Jun Cho ),모용기 ( Yong Gi Mo ),송용택 ( Tae Kyong Song ) 한국화학공학회 2014 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.52 No.6
석탄가스화를 기반으로 한 발전(IGCC 발전) 및 화학원료 제조공정의 상업화 관건은 화석연료인 원유 또는 천연가스를 기반으로 생산되는 경우와 비교하여 경제성을 확보할 수 있는지 여부이다. 경제성 확보를 위한 가장 현실적인 방법으로는 석탄 가스화를 통해 얻어진 합성가스로부터 2개 이상의 생산물(예: 발전과 화학원료를 동시 생산)을 병산(coproduction또는 poly-generation)하는 것이다. 본 연구에서는 석탄 가스화를 기반으로 하여 발전과 수송용, 발전용 및 가정용 연료로 사용이 가능한 DME(dimethyl ether)를 병산하는 공정에 대한 경제성 분석을 실시하였다. 경제성 분석을 위한 병산 공정에서는 250 MW 전력생산 연간 30만 톤의 DMZ 생산을 기준으로 하였다. 병산 공정에서 DME 판매가격이 50만원/ton인 경우, 전기 생산원가는 34.8~58.4원/kWh으로 SMP(계통한계가격) 가중평균인 150.69원/kwh(2013년 1월~12월까지의 평균값)의 33~58% 수준으로 산정되었다. 따라서, DME 판매가격이 적정하게 유지될 경우 석탄IGCC+DME 병산공정은 IGCC 단독 발전과 비교하여 경제성을 확보할 수 있을 것으로 판단된다. 현재 중국에서 DME판매가격이 900,000원/톤 내외이므로, 전력과 DME를 병산할 경우, IGCC 단독으로 전력을 생산할 경우와 비교하여 전력 생산 원가를 월등하게 낮출 수 있음을 알 수 있다. 이와 같이 석탄 가스화를 기반으로 한 병산 공정을 통해 전력과 DME를 병산하는 시스템에서, 시장 여건에 따라 전력과 DME 생산비율 제어가 가능하고, 석탄 가스화기 및 정제 시스템을 공통 설비로 활용함으로써, 개별적으로 생산하는 것보다 생산 원가를 낮출 수 있다는 결과를 얻었다. The key for the commercial deployment of IGCC power plants or chemical (methanol, dimethyl ether, etc.) production plants based on coal gasification is their economic advantage over plants producing electricity or chemicals from crude oil or natural gas. The better economy of coal gasification based plants can be obtained by co-production of electricity and chemicals. In this study, we carried out the economic feasibility analysis on the process of co-producing electricity and DME (dimethyl ether) using coal gasification. The plant’s capacity was 250 MW electric and DME production of 300,000 ton per year. Assuming that the sales price of DME is 500,000 won/ton, the production cost of electricity is in the range of 33~58% of 150.69 won/kwh which is the average of SMP (system marginal price) in 2013, Korea. At present, the sales price of DME in China is approximately 900,000 won/ton. Therefore, there are more potential for lowering the price of co-produced electricity when comparing that from IGCC only. Since the co-production system can not only use the coal gasifier and the gas purification process as a common facility but also can control production rates of electricity and DME depending on the market demand, the production cost of electricity and DME can be significantly reduced compared to the process of producing electricity or DME separately.
급성기 뇌중풍 환자의 실증(實證) 및 허증(虛證)군 특성비교연구
임정태,김미영,최원우,민인규,정우상,문상관,조기호,김영석,Leem, Jung-Tae,Kim, Mi-Young,Choi, Won-Woo,Min, In-Kyu,Jung, Woo-Sang,Moon, Sang-Kwan,Cho, Ki-Ho,Kim, Young-Suk 대한한방내과학회 2008 大韓韓方內科學會誌 Vol.29 No.4
Objectives : This study aimed to evaluate the characteristics of acute stroke patients between excess syndrome and deficiency syndrome groups. Method : We recruited stroke patients from the patients admitted to the Department of Internal Medicine of Kyunghee University Oriental Medical Center, Dongguk University Ilsan Oriental Medical Center, Kyungwon University Songpa Oriental Medical Center and Kyungwon University Incheon Oriental Medical Center from April 2007 to August 2008. We diagnosed acute stroke patients as either excess syndrome or deficiency syndrome and analyzed their characteristics for type of stroke, blood test result. Sasang constitution and lifestyle. Result : We found height, weight, BMI, W/H ratio, hypertension, diabetes, migraine, silent infarction, TG, total lipid, HDL-chol, RBC, Hb, hematocrit, alcohol, smoking and Sasang constitution (Tae-eum, So-yang) were more associated with the excess syndrome group. And we found sea food and Sasang constitution(So-eum) was more associated with the deficiency syndrome group. Conclusion : According to the analysis, we found that the excess syndrome group had more risk factors than the deficiency syndrome group. These results could be utilized in the future as a basis material for Oriental medicine therapy. Further studies will be needed to better understand the differences between excess syndrome and deficiency syndrome groups among acute stroke patients.
( Sang-Cheol Bae ),( Jin-Hye Cha ),( Jung-Yoon Choe ),( Sung Jae Choi ),( Soo-Kyung Cho ),( Won-Tae Chung ),( Chung-Il Joung ),( Young-Ok Jung ),( Young Mo Kang ),( Dong-Wook Kim ),( Jinseok Kim ),( Y 대한류마티스학회 2018 대한류마티스학회지 Vol.25 No.2
Objective. Productivity loss was compared by 3-stage of disease activity and associations between higher disease activity and high productivity loss were identified. Methods. Data were extracted from Rheumatoid Arthritis (RA) Patient-reported Outcomes Research, which enrolled 2,000 RA patients (>20-year) on disease-modifying-antirheumatic-drugs (DMARDs) (≥ 6-month) from December 2012 to June 2013. This included 1,457 RA patients with the disease activity score (DAS-28-ESR) in their medical charts. Productivity loss in time and indirect cost was estimated using The World Health Organization Health and Work Performance Questionnaire (HPQ). Baseline characteristics and productivity loss outcomes were compared according to DAS-28-ESR groups. Results. 84.4% were females, 54.2% had low DAS-28-ESR (<3.2), and 38.2% and 7.6% had moderate (3.2∼5.1) and high DAS-28-ESR (>5.1). Patients with moderate to high DAS-28-ESR had higher lost productivity time (LPT) and monthly costs of LPT than those with low DAS-28-ESR (time in hours: 110.0±58.4 vs. 132.4±57.2 vs. 71.5±52.0, p<0.0001; monthly costs of LPT in 1,000 Korean won: 1,097±607 vs. 1,302±554 vs. 741±531, p<0.0001). Multiple regression analyses revealed significant associations with high LPT in high (adjusted odds ratio [OR]=3.87, 95% confidence interval [CI]: 2.18∼6.87) and moderate DAS-28-ESR (adjusted OR=1.88, 95% CI: 1.41∼2.52) compared to low DAS-28-ESR. In addition, positive associations with high monthly costs of LPT were observed in high (adjusted OR=3.45, 95% CI: 1.98∼5.99) and moderate DAS-28-ESR (adjusted OR=1.93, 95% CI: 1.43∼2.54) compared to low DAS-28-ESR. Conclusion. Timely therapeutic strategies should be taken into consideration given that the RA patients with moderate to high DAS-28-ESR showed strong associations with high productivity loss for effective management of RA. (J Rheum Dis 2018;25:122-130)
Correlation between Hydraulic Conductivity and Electrical Conductivity for Porous Media
Tae Min Oh,Kyu Won Kim,Gye Chun Cho 한국지반공학회 2013 international journal of geo-engineering Vol.5 No.2
Hydraulic conductivity (permeability) is a very important physical property in geotechnical engineering. Monitoring of the hydraulic conductivity is useful for evaluating the ground condition by nondestructive methods. An electrical conductivity measurement technique can be applied to infer hydraulic conductivity. The goal of this study is theoretically to correlate the hydraulic conductivity and electrical conductivity for porous materials and to verify the developed correlation. The verification process is carried out through experimental tests involving glass beads and Joomunjin standard sand. The test variables are the electrical conductivity of the pore fluid, the porosity, and the particle size. The test results show that the estimated hydraulic conductivity realized by the developed correlation is in good agreement with the measured hydraulic conductivity results. Therefore, this preliminary study provides evidence of the strong possibility of the electrical conductivity being feasible for use to monitor the hydraulic conductivity of porous materials.
( Tae Sik Kim ),( Young Je An ),( Kwang Ho Kim ),( Won Sub Chung ),( Young Rae Cho ) 대한금속재료학회 ( 구 대한금속학회 ) 2006 METALS AND MATERIALS International Vol.12 No.4
The effect of the dielectric constant (k) of bonding materials in a screen-printed carbon nanotube (CNT) cathode on the field enhancement factor was investigated for high-efficiency CNT cathodes using the ANSYS software. The values obtained by a simulation study were compared to the experimental results obtained for screen-printed CNT cathodes. The field enhancement factor increased as the dielectric constant decreased, reaching a maximum value at a dielectric constant of 1, the value for a vacuum. The findings indicate that the larger sheet resistance of the bonding materials, after the firing process, can be attributed to the larger emission current of the CNT cathode. From these results, it was concluded that the best bonding materials for screen-printed CNT cathodes should have a low dielectric constant and a high sheet resistance. This finding can be used as criteria for selecting bonding materials for use in CNT pastes for highly efficient CNT cathodes.