Preconcentration-enhanced Immunosensing for Whole Human Cancer Cell Lysate based on a Nanofluidic Preconcentrator

Hsuan Franziska Wu,Tamara G. Amstislavskaya,Pin-Hsuan Chen,Ting-Feng Wu,Yu-Hung Chen,Chun-Ping Jen 한국바이오칩학회 2016 BioChip Journal Vol.10 No.3

Sample preconcentration is an important step that increases the accuracy of subsequent detection, especially for samples with extremely low concentrations. Due to the overlap of electrical double layers in a nanofluidic channel, the concentration polarization effect can be generated by applying an electric field. A nonlinear electrokinetic flow is induced, which results in the fast accumulation of proteins in front of the induced ionic depletion zone, the so-called exclusion- enrichment effect. In this way, a protein sample can be driven by electroosmotic flow and accumulated at a specific location. In the present study, a nanofluidic preconcentrator fabricated with the help of junction gap electric breakdown was integrated with microelectrodes for immunoassay. The preconcentration chip for proteins was fabricated using simple standard soft lithography with a polydimethylsiloxane replica. Human galectin-1 proteins from the cell lysate of T24 cells were concentrated and immunoassayed in the proposed microchip. The capability of the proposed microchip for concentrating multiple proteins from cell lysates and immunoassays after preconcentration was demonstrated. Immunosensing was evaluated by measurements of both fluorescence intensities and impedance, which proved the enhancement of preconcentration for immunoassay.

Mutual intercropping-inspired co-silanization to graft well-oriented organosilane as adhesion promotion nanolayer for flexible conductors

Yi-Hsuan Chen,Yi-Hsiang Lai,Ping-Heng Wu,Li-Syuan Chen,Yung-Sen Lin,Chih-Ming Chen 한국공업화학회 2020 Journal of Industrial and Engineering Chemistry Vol.83 No.-

Surface metallization of polymer substrate andfilm adhesion are crucial to the development offlexibleelectronics. This study demonstrates the co-silanization engineering on the polyimide (PI)film by mutualintercropping of two organosilane molecules to improve their grafting orientability and enhance theadsorbability toward the PI substrate and loaded metal atoms. The mutual intercropping-inspired cosilanizationengineering is implemented by using 3-[(trimethylsilyl)ethynyl]pyridine (TEP) as asupporting organosilane to spatially confine the grafting orientation of the supported aminosilane, 3-[2-(2-aminoethylamino)ethylamino]propyl-trimethoxysilane (ETAS), leading to the formation of a wellorientedorganosilane composite nanolayer as adhesion promotion layer forflexible conductors. Theflexible Cu conductor electrolessly deposited on the PIfilm by co-silanization shows improved adhesionstrength (0.9 kgf/cm) compared to those based on mono-silanization (0.51 kgf/cm) and sputtered Ta/Cu(0.4 kgf/cm). Superior deformability (bendability) was also achieved for the co-silanized Cu/PI sample byretaining good electrical property after bending cycle up to 1000.

Risk factor analysis of coexisting endometrial carcinoma in patients with endometrial hyperplasia: a retrospective observational study of Taiwanese Gynecologic Oncology Group

Yu-Li Chen,Kung-Liahng Wang,Min-Yu Chen,Mu-Hsien Yu,Chen-Hsuan Wu,Yu-Min Ke,Yi-Jen Chen,Yin-Yi Chang,Keng-Fu Hsu,Ming-Shyen Yen 대한부인종양학회 2013 Journal of Gynecologic Oncology Vol.24 No.1

Objective: To evaluate the clinical outcome and parameters related to coexisting endometrial carcinoma in women with tissuediagnosed endometrial hyperplasia. Methods: Between January 1991 and December 2009, three hundred and eighty-six patients with the presumptive diagnosis of endometrial hyperplasia were retrieved. Among these, one hundred and twenty-five patients were identified as having coexisting endometrial carcinoma in hysterectomy specimens. The three hundred and eighty-six patients were divided into two groups: the hyperplasia-benign group (261 cases) and the hyperplasia-malignant group (125 cases). Several clinical parameters including age, menopausal status, history of abnormal uterine bleeding, obstetrical history, medical history of diabetes and hypertension, BMI, and preoperative pathologic results were investigated. Results: Age ≥53 (odds ratio [OR], 2.40; 95% confidence interval [CI], 1.26 to 4.57), menopausal status (OR, 2.07; 95% CI, 1.14to 3.76), diabetes history (OR, 7.33; 95% CI, 2.79 to 19.26), abnormal uterine bleeding (OR, 3.99; 95% CI, 1.22 to 13.02), atypical endometrial hyperplasia (OR, 7.38; 95% CI, 4.03 to 13.49), and body mass index ≥27 (OR, 3.24; 95% CI, 1.76 to 5.97) were independent risk factors for prediction of endometrial hyperplasia coexisting with endometrial carcinoma. The diagnostic efficacy of atypical endometrial hyperplasia to predict the endometrial hyperplasia coexisting with endometrial carcinoma was better than or similar to those of other independent factors and combinations of these factors. Conclusion: Coexisting malignancy should be considered when examining endometrial hyperplasia patients with the related risk factors, especially atypical endometrial hyperplasia.

Design tables and charts for uniform and non-uniform tuned liquid column dampers in harmonic pitching motion

Wu, Jong-Cheng,Wang, Yen-Po,Chen, Yi-Hsuan Techno-Press 2012 Smart Structures and Systems, An International Jou Vol.9 No.2

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%, 40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

Evaluation of Streptomyces saraciticas as Soil Amendments for Controlling Soil-Borne Plant Pathogens

Pei-Hsuan Wu,Tung-Tsuan Tsay,Peichen Chen 한국식물병리학회 2021 Plant Pathology Journal Vol.37 No.6

Soil-borne diseases are the major problems in mono cropping. A mixture (designated LTM-m) composed of agricultural wastes and a beneficial microorganism Streptomyces saraceticus SS31 was used as soil amendments to evaluate its efficacy for managing Rhizoctonia solani and root knot nematode (Meloidogyne incognita). In vitro antagonistic assays revealed that SS31 spore suspensions and culture broths effectively suppressed the growth of R. solani, reduced nematode egg hatching, and increased juvenile mortality. Assays using two Petri dishes revealed that LTM-m produced volatile compounds to inhibit the growth of R. solani and cause mortality to the root knot nematode eggs and juveniles. Pot and greenhouse tests showed that application of 0.08% LTM-m could achieve a great reduction of both diseases and significantly increase plant fresh weight. Greenhouse trials revealed that application of LTM- m could change soil properties, including soil pH value, electric conductivity, and soil organic matter. Our re- sults indicate that application of LTM-m bio-organic amendments could effectively manage soil-borne pathogens.

Reductive degradation of carbon tetrachloride with guava leaf extract

Chenju Liang,Hsuan-Ying Chou,Siang Chen Wu 한국공업화학회 2022 Journal of Industrial and Engineering Chemistry Vol.113 No.-

Guava leaves contain polyphenols, which exhibit antioxidant activities and act as electron suppliers. Itwas postulated that guava leaf extract (GLE) may have the potential to be used as a natural reducingagent for in situ chemical reduction of chlorinated solvents, such as carbon tetrachloride (CT). Extraction of GLE was conducted by boiling guava leaves, and filtering the liquid to produce GLEFiltrate. GLE-Powder was produced by drying the GLE-Filtrate at 50 C. Characterization analysis showeda yield of 16.6 g GLE-Powder/100 g of leaves, with a total polyphenolic content of 300 mg g1, and withgallocatechin as a major constituent. Both GLE-Powder and GLE-Filtrate exhibited the capability todegrade CT in aqueous phase. The CT degradation rate increased with increasing alkaline conditions, atpH higher than the pKa of polyphenols. GLE-Filtrate reductive degradation of CT can be enhanced withthe presence of iron salts, and various minerals, or soils containing iron, at pH 10. The specific surface arearate constant (kSA) of CT degradation for the GLE-Filtrate/Fe2O3 aqueous system was as high as5.52 103 L d1 m2. The analysis of byproducts formation found trichloromethane to be a major intermediate,which was further mineralized to generate Cl.

Design tables and charts for uniform and non-uniform tuned liquid column dampers in harmonic pitching motion

Jong-Cheng Wu,Yen-Po Wang,Yi-Hsuan Chen 국제구조공학회 2012 Smart Structures and Systems, An International Jou Vol.9 No.2

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%,40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

Design of a Bidirectional DC/AC Converter with Battery Charging/Discharging/Standing Balance Control

Liang-Rui Chen,Bo-Rui Xu,Chuan-Sheng Liu,Shao-wei Peng,Chia-Hsuan Wu 전력전자학회 2019 ICPE(ISPE)논문집 Vol.2019 No.5

Battery cells connected in series have been widely used in high-voltage and high-power applications. In this paper, a single-phase battery energy storage system with battery balance charging, battery balance discharging, and power factor correction capabilities was developed. A prototype suitable for a single-phase 110V power supply was designed and implemented for verification. To verify its performance, three 48V/7Ah battery modules were used as normal batteries, and a 48V/5Ah battery module was used as a retired battery. The experimental results showed that the battery energy storage system has excellent battery balancing capability. Compared with that of the conventional system without balanced control, the balancing performance of the proposed system is increased by about 15.25% and 26.92%, respectively, when the system was operated in the converter and rectifier modes. In addition, the proposed system also had battery fault tolerance, and was compatible with recycled batteries and an independent power supply.

Developments of DNA oligonucleotides with site-specific methyl-phosphotriester linkages for molecular detections and precision medicine

Wen-Yih CHEN,Meng-Wei WU,Chih-Chin TSAI,Tsai-Ling LI,Yu-Hsuan CHANG,Wei-Chen LIN,Wei-Cheng CHOU 한국생물공학회 2019 한국생물공학회 학술대회 Vol.2019 No.4

Comparative Analysis of Logistic Regression, Support Vector Machine and Artificial Neural Network for the Differential Diagnosis of Benign and Malignant Solid Breast Tumors by the Use of Three-Dimensional Power Doppler Imaging

Shou-Tung Chen,Yi-Hsuan Hsiao,Yu-Len Huang,Shou-Jen Kuo,Hsin-Shun Tseng,Hwa-Koon Wu,Dar-Ren Chen 대한영상의학회 2009 Korean Journal of Radiology Vol.10 No.5

Objective: Logistic regression analysis (LRA), Support Vector Machine (SVM) and a neural network (NN) are commonly used statistical models in computeraided diagnostic (CAD) systems for breast ultrasonography (US). The aim of this study was to clarify the diagnostic ability of the use of these statistical models for future applications of CAD systems, such as three-dimensional (3D) power Doppler imaging, vascularity evaluation and the differentiation of a solid mass. Materials and Methods: A database that contained 3D power Doppler imaging pairs of non-harmonic and tissue harmonic images for 97 benign and 86 malignant solid tumors was utilized. The virtual organ computer-aided analysis-imaging program was used to analyze the stored volumes of the 183 solid breast tumors. LRA, an SVM and NN were employed in comparative analyses for the characterization of benign and malignant solid breast masses from the database. Results: The values of area under receiver operating characteristic (ROC) curve, referred to as Az values for the use of non-harmonic 3D power Doppler US with LRA, SVM and NN were 0.9341, 0.9185 and 0.9086, respectively. The Az values for the use of harmonic 3D power Doppler US with LRA, SVM and NN were 0.9286, 0.8979 and 0.9009, respectively. The Az values of six ROC curves for the use of LRA, SVM and NN for non-harmonic or harmonic 3D power Doppler imaging were similar. Conclusion: The diagnostic performances of these three models (LRA, SVM and NN) are not different as demonstrated by ROC curve analysis. Depending on user emphasis for the use of ROC curve findings, the use of LRA appears to provide better sensitivity as compared to the other statistical models. Objective: Logistic regression analysis (LRA), Support Vector Machine (SVM) and a neural network (NN) are commonly used statistical models in computeraided diagnostic (CAD) systems for breast ultrasonography (US). The aim of this study was to clarify the diagnostic ability of the use of these statistical models for future applications of CAD systems, such as three-dimensional (3D) power Doppler imaging, vascularity evaluation and the differentiation of a solid mass. Materials and Methods: A database that contained 3D power Doppler imaging pairs of non-harmonic and tissue harmonic images for 97 benign and 86 malignant solid tumors was utilized. The virtual organ computer-aided analysis-imaging program was used to analyze the stored volumes of the 183 solid breast tumors. LRA, an SVM and NN were employed in comparative analyses for the characterization of benign and malignant solid breast masses from the database. Results: The values of area under receiver operating characteristic (ROC) curve, referred to as Az values for the use of non-harmonic 3D power Doppler US with LRA, SVM and NN were 0.9341, 0.9185 and 0.9086, respectively. The Az values for the use of harmonic 3D power Doppler US with LRA, SVM and NN were 0.9286, 0.8979 and 0.9009, respectively. The Az values of six ROC curves for the use of LRA, SVM and NN for non-harmonic or harmonic 3D power Doppler imaging were similar. Conclusion: The diagnostic performances of these three models (LRA, SVM and NN) are not different as demonstrated by ROC curve analysis. Depending on user emphasis for the use of ROC curve findings, the use of LRA appears to provide better sensitivity as compared to the other statistical models.