http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로웨이브센서와 디밍제어를 활용한 조명제어시스템 설계 및 구현
송은성(Eun-Seong Song),민병원(Byoung-Won Min),오용선(Yong-Sun Oh) 한국콘텐츠학회 2013 한국콘텐츠학회논문지 Vol.13 No.12
본 논문에서는 지하주차장 조명방식의 효율성을 확보하기 위하여 디밍제어와 마이크로웨이브센서기술을 접목하여 새로운 조명제어시스템을 설계?구현한다. 이를 통하여 기존 시스템에 비하여 성능과 비용 측면에서 효율적인 조명체계를 확립하고 궁극적으로 에너지 절감효과를 얻고자 한다. 기존 아파트 지하주차장의 에너지 절감방식은 대부분 설계 당시 설치된 형광등을 전부 운영하지 않고 격등으로 운영하는 방책에 의존하고 있다. 일부에서는 이와 같은 격등 운영을 원활히 하기 위하여 적외선센서를 설치하여 형광등을 점?소등하거나, 타이머를 활용한 형광등의 점등시간을 조절하고 있다. 이러한 기존의 방식은 단순히 설계된 전기사용량에 비해 소모되는 양을 감소시키는 방식으로 체계적인 에너지 절감 효과를 기대할 수 없으며, 방치되는 경우 지속적인 소모가 발생하는 등 매우 비효율적으로 운영되고 있다. 본 조명제어시스템은 마이크로웨이브센서를 통해서 사물을 감지하여 조명등의 점등 시점을 알려주고, LED 형광등의 디밍제어를 통해 환경에 따라 그 밝기를 조정함으로써, 일정한 조도로 상시 점등되는 기존의 지하주차장 조명체계를 획기적으로 개선한다. 본 논문을 통하여 설계된 조명제어시스템을 일반 지하주차장 조명체계에 적용하여 검증을 실시한 결과 최대 약 81.9%의 에너지 절감효과를 얻었다. In this paper, we present a novel illumination system for parking lots constructed underground. We design and implement this system using microwave sensors and dimming control of LED fluorescent lamps so that we can obtain lighting efficiency of the illumination scheme. We construct an effective illumination system in the aspects of performance and cost, resulting in energy-saving and electricity reduction. Recently conventional energy-saving method applied to old underground parking lots mainly relies upon turning off the half of total number of lamps installed in the parking lot. Sometimes there are some lots that have infrared sensor to be used to turn on/off the fluorescent lamps to realize these operations smoothing. The other schemes utilize timer to control lighting time of the fluorescent lamps. These conventional schemes are forcing to turn off a part of lamps installed so that we cannot apply them in a systematic way. Moreover they will be most inefficient when we leave them alone to be continuous consumers. The lighting control system proposed in this paper can recognize objects through microwave sensors and inform the appropriate lighting time, furthermore we can adjust brightness of LED lamps following the surroundings using dimming control scheme so that we can epochally improve the illumination system for underground parking lots. According to our sophisticated test experiments, we can maximally obtain 81.9% of energy-saving effectiveness using the system proposed in this paper.
송인찬,곽철은,민병구,Song, In-Chan,Kwack, Cheol-Eun,Min, Byoung-Goo 대한의용생체공학회 1990 의공학회지 Vol.11 No.2
As a part of the study on ultrasonic tissue characterization, conventional ultrasonic imaging system is interfaced to the personal computer to acquire raw ultrasonic signal. One approach for tissue charaterization is performed using the attenuation map to the conventional images and the resulting attenuation map images are compared and inspected inside the region of interest from the viewpoint of pattern analysis. Currently, these methods are applied and modified to effectively find out the differences between the normal control and the patients with liver cirrhosis.
조재웅(Cho Jae-Ung),민병상(Min, Byoung-Sang),이은종(Lee Eun-Jong),남중송(Nam, Jung-Song) 한국산학기술학회 2010 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 비닐하우스 기존모델과 이번에 개발한 모델의 모델링 하였으며, 해석은 폭설이 250mm 왔을 때 쌓인 눈의 하중에 의하여 비닐하우스가 어떠한 변형을 하는 지를 구조해석을 통하여 비교하는 것이 주된 목적이다. 기존의 비닐하우스와 개발한 비닐하우스의 구조에 있어서 개발 모델을 적용함으로서 기존 모델보다 비용이 덜 들고 최대 50% 이상의 변형량을 줄일 수 있어 안정성이 좋고, 그 제작비용도 절감할 수 있다.
최호웅(Ho-Woong Choi),김은영(Eun-Young Kim),민병운(Byoung-Woon Min),이동철(Dong-Chul Lee),김희수(Hee-Soo Kim) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
In prevention and diagnostic system of GIS, pattern classification is focused on the detection of unnatural patterns in PD(partial discharge) image data. Fractals have been used extensively to provide a description and to model mathematically many of the naturally occurring complex shapes, such as coastlines, mountain ranges, clouds,etc., and have also received increased attention in the field of image processing, for purposes of segmentation and recognition of regions and objects present in natural scenes. Among the numerous fractal features that could be defined and used for image data, fractal dimension and lacunarity have been found to be useful for recognition purposes. Partial discharge(PD)occuring in GIS system is a very complex phenomenon, and more so are the shapes of the various 2-d patterns obtained during routine tests and measurements. It has been fairly well established that these pattern shapes and underlying defects causing PD have a 1:1 correspondence, and therefore methods to describe and qunatify these pattern shapes must be explored, before recognition systems based on them could be developed. The computed fractal features(fractal dimension and lacunarity) for standard library of PD data were analyzed and found to possess fairly reasonable pattern discriminating abilities. This new approach appears promising, and further research is essential before any long-term predictions can be made.
심은보,박명수,여종영,고형종,박찬영,민병구 제주대학교 인공심장이식연구소 2001 인공심장 연구 Vol.2 No.1
한국형 인공심장 내의 혈액 유동을 유한요소 코드인 ADINA를 사용하여 수치적으로 조사하였다. 그 동안 많은 실험을 통해서 밝혀진 중요한 문제점들 중의 하나는 바로 혈전 생성이다. 이것은 혈액 주머니내의 작용하는 과도한 높은 전단응력 또는 정체 영역과 밀접한 관련이 있다. 한국형 인공심장 내의 혈류는 액추에이터와 혈액주머니, 그리고 혈액의 상호작용에 의하여 정의될 수 있다. 여기에서 혈액은 비압축성, 뉴우턴 유체로 가정하였으며, 혈액주머니는 등방성 선형 고체재질로 가정하였다. 2차원 모델은 액추에이터와 혈액 주머니 사이의 접측 문제 및 고체-유체 상호작용 문제를 전부 고려하였다. 3차원 모델에서는 액추에이터에 의한 변형을 접촉문제를 혈액주머니 외부에 작용하는 압력조건으로 단순화하였다. 2차원 모델 계산결과에 의하면, 입구 및 출구 부근, 그리고 모서리 부근에서 전단응력의 세기가 매우 크다는 것을 발견할 수 있었다. 또한 위쪽 돌출부에서 속도가 매우 느려지는 정체 영역이 형성되었으며, 이는 실험에서 관찰된 혈전 생성영역과 거의 일치한다. 3차원 계산의 경우에도 역시 입구와 출구 부분에서 재순환 영역이 발견되었으며, 수축시에는 입구의 아래쪽에서, 이완시에는 출구의 아래쪽에서 정체영역이 생성됨을 알 수 있었다. One of the crucial problems which make the artificial heart operate improperly is the thrombus formation. Many experimental results show the thrombus formation is strongly retated with a high shear stress and the stagnation in the blood flow. Therefore study on the blood flow in artificial hearts is very important in a practical point of view. This thesis deals with the two- and three-dimensional unsteady blood flows in the Korean total artificial hearts(KTAH). It is numerically investigated by using the commercial finite element code ADINA. The flow in the sac of artificial heart results from the mutual interaction of the acuator, sac, and blood. Blood is assumed as an incompressible viscous Newtonian fluid, while the sac is considered to be elastic and isotropic solid material. The contact problem between the actuator and sac is included in the two-dimensional modelling. Because of the tremendously calculation time, the action of the actuator is replaced by the imposition of the time-varying pressure on the outer surface of the sac. Numerical results show a high shear stress distribution near the inlet and outlet corners of the sac. From two-dimensional calculation flow stagnation is seen to be found in the upper convex part of the sac. By comparing the numerical results with the experimental ones we can conclude the thrombus is generated in regions where blood flow stagnates or is very slow.