http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
중규모 유역에서 Clark 방법과 ModClark 방법을 이용한 유출해석 시적정 소유역 분할 개수에 대한 연구
이동훈,최종인,신수훈,이재응,Lee, Donghoon,Choi, Jongin,Shin, Soohoon,Yi, Jaeeung 대한토목학회 2013 대한토목학회논문집 Vol.33 No.1
본 연구에서는 강우-유출 모형을 이용하여 소유역 분할에 따른 유출변화 특성을 파악한 후 다수의 시험유역에 대해 적합한 소유역 분할개수를 제시하였다. 강우-유출과정을 모의하기 위하여 HEC-HMS 내의 집중형 모형인 Clark 방법과 준분포형 모형인 ModClark 방법을 시험유역인 안동댐, 임하댐 및 평창강의 3개 유역에 적용하였다. 각각의 시험유역에 대하여 1개, 3개, 5개, 6개, 7개, 9개, 10개, 12개, 15개의 9가지 case로 등면적 분할을 하였으며, 모의된 첨두유량과 첨두시간을 실제 관측된 수문곡선과 비교 분석하였다. 시험유역에 대한 소유역 분할에 따른 유출모의 결과 소유역 분할 수가 증가할수록 첨두유량은 증가하였고 첨두시간은 짧아졌으며 이러한 경향은 일정 분할개수 이후 급격히 감소하는 것으로 나타났다. 본 연구에서는 이러한 경향이 감소하기 시작하는 소유역 분할 수를 최소분할개수로 나타내었으며, 첨두유량 및 첨두시간을 종합적으로 고려하였을 때 안동댐 및 임하댐 유역은 최소분할개수가 5개, 평창강 유역은 7개로 분석되었다. In this study, flood runoff characteristics is analyzed according to subbasin divisions by physically based rainfall-runoff model and appropriate number of subbasin divisions is suggested for midsize test basins. The Clark method, a lumped model in HEC-HMS, and the ModClark method, a semi-distributed model are used to simulate rainfall-runoff processes on Andong-reservoir basin, Imha-reservoir basin, and Pyeongchang river basin. The test basins were divided into nine subdivision cases by equal-area subdivision method such as single basin, 3, 5, 6, 7, 9, 10, 12, and 15 subbasins, and compared the simulated and observed values in terms of the peak flow and the peak time. The simulation results indicated that the peak flows tended to increase and the peak time shifted earlier as the number of subdivisions increased and this tendency weakened after the certain number of subdivisions. In this research, the specific number of subdivision was defined as the minimum number of subdivision considering both peak flow and peak time. Consequently, the minimum number of subdivisions is determined as 5 for Andong and Imha reservoir basins and 7 for Pyeongchang river basin.
전기방사로 제작된 산화물 나노사 열전 pn 커플의 제작 및 특성
이동훈,조경아,최진용,김상식,Lee, Donghoon,Cho, Kyoungah,Choi, Jinyoung,Kim, Sangsig 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.4
In this study, we propose a novel fabrication of an oxide-based lateral thermoelectric pn couple and investigate the characteristics of the thermoelectric couple. Electrospun ZnO and $LaSrCoO_3$ nanofibers are used as n- and p-legs of the couple, respectively. The Seebeck coefficients of the n- and p-type nanofibers and the pn couple are $-98.1{\mu}V/K$, $42.4{\mu}V/K$, and $118.8{\mu}V/K$, respectively. The thermoelectric couple generates an output voltage of $484.7{\mu}V$ at a temperature difference of 4.1 K.
날개의 전개성능 확인을 위한 공압식 시험장치 성능 해석
이동훈,Lee, Donghoon 한국군사과학기술학회 2016 한국군사과학기술학회지 Vol.19 No.2
In this paper, a pneumatic device for the deployment performance verification of canards deployed by inertia has been designed and the performance of the pneumatic device has been proven through analysis and tests. The pneumatic conveying process, orifice opening process and piston movement process of the pneumatic device were investigated by using numerical methods. The orifice diameter, pressure in a pressure tank and type of gas were regarded as the main design parameters of the pneumatic device. The error rate between analysis and test results under the same conditions was within 4 %. The accuracy of numerical methods used in this study were validated.
이동훈 ( Donghoon Lee ),김병엽 ( Byung-yeop Kim ),장성형 ( Seonghyung Jang ) 한국지구물리·물리탐사학회 2016 지구물리와 물리탐사 Vol.19 No.3
무선 탄성파 탐사 기술은 각 노드들이 케이블로 연결되지 않은 독립적인 수진기를 활용하여 탄성파 자료를 취득하는 것을 말한다. 이 기술은 지형조건에 영향을 적게 받아 다양한 측선설계를 적용할 수 있다. 또한 수진기 설치와 수거가 간편하고 무선 수진기 관련 장비기술 발전으로 자료품질도 양호하여 최근 육상 석유탐사 자료취득에 활용되기 시작하였다. 여기에서는 무선 탄성파 탐사 시스템과 시스템을 구성하는 장비의 특성을 살펴보고 현장적용 실험을 통해 무선 탄성파 탐사 기술을 소개하고자 하였다. 탄성파 토모그래피 현장적용 실험에서 음원으로부터 같은 거리에 있는 무선 수진기와 유선 수진기에 기록된 탄성파 신호음을 비교해보면 초기 위상이 일치하고 초동 차이가 0.4 ms 정도로 두 수진기에서 신호음이 거의 일치함을 알 수 있었다. 무선 탄성파 탐사 기술을 이용한 반사파 탐사 현장적용 실험에서는 발파공 깊이와 화약량에 따른 시험발파를 수행하고 음원모음을 취득하여 유선 탄성파 탐사에 의한 음원모음과 비교하여 유사한 결과를 확인하였다. 무선 탄성파 기술은 수진기 설치의 간편성, 탐사 측선 설계의 용이성으로 인하여 그 활용 가능성이 증가할 것으로 여겨진다. Cable-free seismic technology is to acquire seismic data with independent receivers which are not connected by cables. This is an effective method for survey designs with less topographical conditions. With technology advancement for cable-free receivers, reliable data quality, easy deployment, and picking up the receivers, the cable-free technology has begun to apply to land seismic acquisition. In this study we introduced a cable-free seismic system and its equipment. We tried to build up the cable-free seismic technology through the field application. In the seismic tomography field applications, the seismic signals of the cable-free receiver and cabled receiver with the same distance from the source show the same phase in early stage. The difference of the first arrival times between two signals is less than 0.4 ms, which could be accepted. In the field application for seismic reflection exploration, we acquired shot gathers with different source depth and dynamite charge. The shot gathers from cable-free and cabled system are similar to each other. With an efficient method for receiver deployment and survey design, the application of the cable-free technology will increase.