http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
H.261 비디오 스트림상의 부가영상 삽입 알고리즘 개발
이성우(Sung-Woo Lee),오하령(Ha-Ryoung Oh),성영락(Yeong-Rak Seong) 한국정보과학회 2000 한국정보과학회 학술발표논문집 Vol.27 No.1B
화상회의 시스템의 영상 압축표준 중 하나인 H.261은 화상전화기에서 주로 사용되고 있다. 본 논문에서는 기존의 H.261 영상에 부가영상을 삽입하는 방법을 제안한다. H.261 영상에 단순히 부가영상을 삽입하면 움직임보상 데이터 처리를 하지 않기 때문에 전달된 H.261 영상으로부터 원래의 영상을 복원하기 어렵다. 이를 해결하는 방법으로 원시 H.261 영상 전체를 복호화 한 후 부가영상을 삽입하고 다시 부호화하는 방법이 있으나 이 경우 처리해 주어야 할 데이터가 너무 많아 수행속도의 저하를 가져온다. 본 논문에서는 영상의 전체를 부호화하는 대신 실제 필요한 부분만 부호화하는 방법을 제안한다. 제안한 방법은 움직임 보상 정보가 영상에 아무 영향을 미치지 않을 경우에는 허프만 복/부호화만을 사용하여 단순삽입을 하고, 움직임 보상 정보가 부가영상과 겹치게 되어 부가 영상이 전달 받는 측에서 문제가 될 경우만 미리 복호화해 두었던 영상데이터를 보낸다. 간단한 실험을 통하여 제안된 알고리즘의 성능을 분석한 결과 저네를 복/부호화하는 방법에 비하여 대략 3배의 속도의 향상을 보였다.
고속 UHF RFID 태그 검사 장비를 위한 전용 리더
배성우(Sung Woo Bae),박준석(Jun-Seok Park),성영락(Yeong Rak Seong),오하령(Ha-Ryoung Oh) 대한전기학회 2014 전기학회논문지 Vol.63 No.1
RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.
배성우(Sung Woo Bae),박준석(Jun-Seok Park),성영락(Yeong Rak Seong),오하령(Ha-Ryoung Oh) 대한전기학회 2014 전기학회논문지 Vol.63 No.1
As RFID is utilized more frequently and diversely in terms of its application areas, the application of mobile RFID technology, which integrates cellular networks and RFID, is highly anticipated. The growth and development of the RFID field has bolstered the development of mobile RFID chips to be embedded in mobile phones. Because mobile RFID chips are embedded in cell phones, limitations such as low power, small form factor, and costliness must be confronted. This study presents the design of a RFID digital baseband processor that is suitable for mobile readers. The RF analog component, which affects the baseband signals, is designed separately, in consideration of the limitations stated above. The function of the baseband processor was verified through simulations and prototyped using FPGA. The power consumption of the chip is 20mW under a 20MHz clock and the chip measures 3mm x 3mm.
다중 프로세서 환경에서 연결구조에 무관한 휴리스틱 부하평형 알고리즘
송의석,성영락,오하령,Song Eui-Seok,Sung Yeong-Rak,Oh Ha-Ryoung 대한전자공학회 2005 電子工學會論文誌-CI (Computer and Information) Vol.42 No.1
This paper proposes an efficient heuristic load balancing algorithm for multiprocessor systems. The algorithm minimizes the number of idle links to distribute load traffic and reduces its communication cost. Each processor iteratively tries to transfer unit load to/from all neighbor processors. However, real load transfer is collectively done after all load traffic is calculated. This prevents useless traffic and thus reduces the overall load traffic. The proposed algorithm can be employed in various interconnection topologies with slight modifications. In this paper, it is applied to hypercube, mesh, k-ary n-cube and general graph environments. For performance evaluation, simulation studies are performed. The proposed algorithm and the well-known existing algorithms are implemented and compared. The results show that the proposed algorithm always balances the loads perfectly. furthermore, in comparison with the existing algorithms, it reduces the communication costs by 77%, 74% and 73% in the hypercube, the mesh, and k-ary n-cube, respectively. 본 논문에서는 다중 프로세서 시스템을 위한 효율적인 휴리스틱 부하 평형 알고리즘을 제안한다. 제안 알고리즘은 부하이동을 여러 링크로 분산시켜, 사용하지 않는 링크의 수를 최소화하고 그에 따라 통신비용이 감소한다. 각각의 프로세서는 모든 이웃한 프로세서에게 단위부하를 보내거나 받는 과정을 반복적으로 시도한다. 그리나 실제의 부하 이동은 모든 계산이 이루어진 후 수행된다. 이것은 불필요한 부하 이동을 막아 전체적으로 부하이동의 수가 감소한다. 제안된 알고리즘은 약간의 수정만으로 다양한 연결 구조를 갖는 다중 프로세서 시스템에 적용한 수 있다. 본 논문에서는 하이퍼큐브 구조, 메쉬 구조, k-ary n-cube 구조와 일반 그래프 구조에 제안 알고리즘을 적용해 보았다. 알고리즘의 성능평가를 위하여 모의실험을 하였다. 제안된 알고리즘과 잘 알려진 알고리즘을 구현하여 비교하였다. 그 결과 안된 알고리즘은 모든 경우에서 완전한 부하평형에 도달하였다. 또한 기존의 알고리즘과 비교하여 하이퍼큐브 구조에서는 약 77%, 메쉬 구조에서는 약 74%, 또한 k-ary 2,3-cube 구조에서는 약 73% 정도 통신비용을 감소시켰다.
실시간처리 운영체계 환경에서 Hybrid 방식을 이용한 디지털 DBS 위성수신기 성능개선
김성훈(Sung-Hoon Kim),성영락(Yeong Rak Seong),정경훈(Kyeong Hoon Jung),강동욱(Dong Wook Kang),김기두(Ki Doo Kim) 한국방송·미디어공학회 2005 한국방송공학회 학술발표대회 논문집 Vol.2005 No.-
??A Digital Broadcasting Satellite (DBS) receiver converts digital AN streams received from a satellite to analog NTSC A/V signals in real-time. Multi-tasking is an efficient way to improve the utilization of the processor core in real-time applications. In this paper, we propose a hybrid approach with a balanced tradeoff between hardware kernel and multi-tasking programming to increase a system throughput. First, the schedulability of the critical hard real-time tasks in the DBS receiver is verified by using a simple feasibility test. Then, several soft real-time tasks are thoughtfully programmed to satisfy functional requirements of the system.
장위식,조병헌,성영락,오하령,Jang, Wee-Sik,Cho, Byeong-Heon,Sung, Yeong-Rak,Oh, Ha-Ryoung 한국정보처리학회 2002 정보처리학회논문지 A Vol.9 No.4
본 논문에서는 범용 내장형 컴퓨터 시스템을 설계하고 구현한다. 범용 내장형 컴퓨터 시스템의 가장 중요한 점은 확장성과 유연성이다. 개발된 시스템은 세 개의 모듈로 나뉘어 구성되며, 소프트웨어는 하드웨어에 독립적인 응용 프로그램 인터페이스를 제공한다. 또한 공개 실시간 운영체제인 uC/OS-II의 기능을 확장하여 개발된 범용 내장형 컴퓨터 시스템에 이식한다. 확장된 uC/OS-II는 여러 프로세스들이 같은 우선순위를 가지는 것을 지원하고, 같은 우선순위의 프로세스들에 대해서는 라운드-로빈 방식으로 스케줄링 된다. In this paper, a general purpose embedded computer system is designed and implemented. The most crucial points of the system are extensibility and flexibility. The hardware of the developed system is composed of three modules and the software provides hardware independent application program interfaces. Moreover, uC/OS-II, a well-known open realtime kernel. is extended and ported onto the system. The extended uC/OS-II supports that multiple processes can have the same priority and such processes are scheduled in a round-robin manner.
RFID 리더를 위한 중재 알고리즘의 모델링 및 시뮬레이션
류원상 ( Won Sang Ryu ),안시영 ( Si Young Ahn ),김용택 ( Yong Taek Kim ),배성우 ( Sung Woo Bae ),송의석 ( Eui Seok Song ),정명섭 ( Myoung Sub Jeong ),성영락 ( Yeong Rak Seong ),오하령 ( Ha Ryoung Oh ),박준석 ( Jun Seok Park ) 한국정보처리학회 2007 한국정보처리학회 학술대회논문집 Vol.14 No.2
RFID (Radio Frequency IDentification) 리더의 동작 영역은 리더의 감도와 전력이 도달할 수 있는 거리에 의해 제한된다. RFID Shower 는 근접한 리더로부터 전송되는 신호를 증폭하여 리더의 동작 영역을 확장한다. 그러나, RFID Shower의 동작 영역 안에 여러 리더들이 있을 경우 리더들간의 신호충돌이 발생한다. 이를 해결하기 위해 중재 알고리즘이 제안되었다. 본 논문에서는 RFID 리더들을 위한 중재 알고리즘을 DEVS 형식론에 기반하여 모델링하고 시뮬레이션 하여 성능을 측정, 비교하였다.