충북지역 도시방재계획의 도시계획적 진단과 발전방향 : 도시계획서 분석 및 전문가 의견조사를 중심으로

백기영,황희연,박병호,이만형,황재훈,류을렬 永同大學校 1999 硏究論叢 Vol.5 No.1

본 연구는 도시방재계획의 현황을 도시계획적 차원에서 진단하고 그 발전방향을 도출하고자 하는 목적하에, 충청북도의 조례와 지침중 도시방재 관련 사항을 정리하며, 충청북도 지방도시계획위원회 회의록 및 관련자료를 검토하여 방계계획의 취급 수준을 파악하였다. 실제 도시계획 상황에 대한 진단은 도시계획 보고서를 대상으로 도시방재계획의 위상을 분석하고 평가하였다. 또한 도시방재계획의 위상과 관련 전문가의 인식수준을 평가하고 이를 바탕으로 향후 바람직한 도시방재계획의 위상을 설정하기 위해 필요한 사항을 분석하고자, 도시방재에 관한 일반의식 수준, 도시재해에 관한 대처방안, 도시방재계획의 평가방향 등을 중심으로 설문조사를 실시하였다. 이상과 같은 충북지역의 방재계획에 대한 도시계획적 진단을 바탕으로 도시방재계획 관리체계의 방향 도출과 도시방재계획의 향후방향 제안을 시도하였다. This paper examines the status quo of the existing urban disaster prevention plans in Chungbuk Province and suggests alternative orientations for the future application. Its methodological themes center around the systematic compilation and accountability of disaster-related ordinances, mostly hinged on evaluation of major disaster items documented in various urban master or revision plans. In addition, it recommends the concrete guidelines and contents in disaster prevention plans, both of which are based on the aggregated results of expert opinion survey in and around Chungbuk Province. In order to tackle with diverse and unpredictable disasters which are well observed in modern urban society, this paper urges that the relatively weak legal and planning standards of the existing disaster prevention plans have to be immediately revised. For instance, the paper vividly shows that the present dimension of disaster prevention plans within the existing master plans and perception of specialist are not satisfactory mainly because of the internal limitation of the existing plans. Secondly, it seems imperative for planners to pay attention to systematic operation and management, even starting from the early development stage of urban disasters. Lastly, it proposes the alternative checklists given to measure the suitability of the disaster plans.

하천 수질에 대한 36시간 연속 모니터링 기법 연구

박정규,정흥배,문성환,류태권,류제영,황인영 한국환경독성학회 2001 환경독성보건학회지 Vol.16 No.4

1. 금호강물에 대한 상대독성과 수온, 전기전도도의 경우 달서천 내부, 금호강과 달서천의 합류점 하부, 합류점 상부 순으로 값의 크기를 보였고 pH의 경우 역순을 보이므로 달서천이 금호강과 달서천 합류점 하부에 영향을 주는 것으로 사료된다. 2. 금호강 하천수에 대한 Microtox 독성값과 온도, pH, 전기전도도의 상관성은 없었으므로 기존의 일반적인 몇 가지 수질 인자로는 독성변화 및 수준을 판단할 수 없다고 사료된다. 3. 36시간 연속 모니터링을 통해 짧은 시간에도 독성값이 달라지는 것으로 보아 수질의 독성 수준이나 오염 수준을 판단하기 위해서는 연속적인 독성 조사 및 분석이 필요하다고 사료된다. 4. 하천수에 대한 연속 모니터링만으로는 하천 생태 위해도를 평가하기는 어렵다. 따라서, 하천 퇴적물에 대한 특성을 병행하여 조사 분석하는 것이 유해화학물질에 의한 하천 오염을 평가하는 방법이 된다고 사료된다. The main point source of pollution of the Keumho river in Taegu, Korea, stems from waste from the areas of industrial complexes. Although it is widely accepted that pollutants in waste water negatively effects general water quality, it is difficult to evaluate the effluent effect because of varying conditions in ambient water and inconclusive knowledge of causative pollutants. To analyze the water in relation to the industrial effluent in the area, pH, temperature, conductivity, and Microtox toxicity of various river samples were measured. Water samples were collected every 2 hours for 36 hours from Keumho river and Dalseo stream. Data from continuous monitoring for 36 hours showed that effluent in Keumho river originated from Dalseo stream, which is near adjacent to industrial complexes. Change in toxicity and other factors tested during the 36 hours indicated that continuous monitoring was necessary for a satisfactory effluent toxicity test. Furthermore, in addition to water quality monitoring, it was concluded that sediment toxicity also needed to evaluate effluent effects.

Enhanced Electron Emission of Carbon Nanotube Arrays Grown Using the Resist-Protection-assisted Positioning Technique

Ryu, Je-Hwang,Kim, Ki-Seo,Yu, Yi-Yin,Lee, Chang-Seok,Lee, Yi-Sang,Jang, Jin,Park, Kyu-Chang The Korean Infomation Display Society 2008 Journal of information display Vol.9 No.4

Field emitter arrays (FEAs) were developed using carbon nanotubes (CNTs) as electron emission sources. The CNTs were grown using a selective-positioning technique with a resist-protection layer. The light emission properties were studied through the electron emission of the CNTs on patterned islands, which were modulated with island diameter and spacing. The electron emission of CNT arrays with $5{\mu}m$ diameters and $10{\mu}m$ heights increased with increased spacing (from $10{\mu}m$ to $40{\mu}m$). The electron emission current of the $40-{\mu}m$-island-spacing sample showed a current density of 1.33 mA/$cm^2$ at E = 11 V/${\mu}m$, and a turn-on field of 7 V/${\mu}m$ at $1{\mu}A$ emission current. Uniform electron emission current and light emission were achieved with $40{\mu}m$ island spacing and $5{\mu}m$ island diameter.

Vertically aligned carbon nanotube emitter on metal foil for medical X-ray imaging.

Ryu, Je Hwang,Kim, Wan Sun,Lee, Seung Ho,Eom, Young Ju,Park, Hun Kuk,Park, Kyu Chang American Scientific Publishers 2013 Journal of Nanoscience and Nanotechnology Vol.13 No.10

<P>A simple method is proposed for growing vertically aligned carbon nanotubes on metal foil using the triode direct current plasma-enhanced chemical vapor deposition (PECVD). The carbon nanotube (CNT) electron emitter was fabricated using fewer process steps with an acid treated metal substrate. The CNT emitter was used for X-ray generation, and the X-ray image of mouse's joint was obtained with an anode current of 0.5 mA at an anode bias of 60 kV. The simple fabrication of a well-aligned CNT with a protection layer on metal foil, and its X-ray application, were studied.</P>

Growth of Vertically Aligned CNTs with Ultra Thin Ni Catalysts

Ryu, Je-Hwang,Yu, Yi-Yin,Lee, Chang-Seok,Jang, Jin,Park, Kyu-Chang,Kim, Ki-Seo The Korean Institute of Electrical and Electronic 2008 Transactions on Electrical and Electronic Material Vol.9 No.2

We report on the growth mechanism of vertically aligned carbon nanotubes (VACNTs) using ultra thin Ni catalysts and direct current plasma enhanced chemical vapor deposition (PECVD) system. The CNTs were grown with -600 V bias to substrate electrode and catalyst thickness variation of 0.07 nm to 3 nm. The CNT density was reduced with catalyst thickness reduction and increased growth time. Cone like CNTs were grown with ultra thin Ni thickness, and it results from an etch of carbon network by reactive etchant species and continuous carbon precipitation on CNT walls. Vertically aligned sparse CNTs can be grown with ultra thin Ni catalyst.

Opposing Roles of WNT-5A and WNT-11 in Interleukin-1β Regulation of Type II Collagen Expression in Articular Chondrocytes

Ryu, Je-Hwang,Chun, Jang-Soo American Society for Biochemistry and Molecular Bi 2006 The Journal of biological chemistry Vol.281 No.31

Poster Session 3 : Signal Transduction ; Wnt-3a and Wnt-7a regulate differentiation, maintenance of differentiated phenotype and survival of articular chondrocytes with different mechanisms

( Je Hwang Ryu ),( Sang Gu Hwang ),( Han Gyul Kim ),( Seon Hee Kim ),( Jang Soo Chun ) 한국생화학분자생물학회 (구 한국생화학회) 2003 생화학분자생물학회 춘계학술발표논문집 Vol.2003 No.-

Hypoxia-Inducible Factor-2α Is an Essential Catabolic Regulator of Inflammatory Rheumatoid Arthritis

Ryu, Je-Hwang,Chae, Chang-Suk,Kwak, Ji-Sun,Oh, Hwanhee,Shin, Youngnim,Huh, Yun Hyun,Lee, Choong-Gu,Park, Yong-Wook,Chun, Churl-Hong,Kim, Young-Myeong,Im, Sin-Hyeog,Chun, Jang-Soo Public Library of Science 2014 PLoS biology Vol.12 No.6

<▼1><P>Hypoxia-inducible factor-2α (HIF-2α) is sufficient to cause experimental rheumatoid arthritis and acts to regulate the functions of fibroblast-like cells from tissue surrounding joints, independent of HIF-1α.</P></▼1><▼2><P>Rheumatoid arthritis (RA) is a systemic autoimmune disorder that manifests as chronic inflammation and joint tissue destruction. However, the etiology and pathogenesis of RA have not been fully elucidated. Here, we explored the role of the hypoxia-inducible factors (HIFs), HIF-1α (encoded by <I>HIF1A</I>) and HIF-2α (encoded by <I>EPAS1</I>). HIF-2α was markedly up-regulated in the intimal lining of RA synovium, whereas HIF-1α was detected in a few cells in the sublining and deep layer of RA synovium. Overexpression of HIF-2α in joint tissues caused an RA-like phenotype, whereas HIF-1α did not affect joint architecture. Moreover, a HIF-2α deficiency in mice blunted the development of experimental RA. HIF-2α was expressed mainly in fibroblast-like synoviocytes (FLS) of RA synovium and regulated their proliferation, expression of RANKL (receptor activator of nuclear factor–κB ligand) and various catabolic factors, and osteoclastogenic potential. Moreover, HIF-2α–dependent up-regulation of interleukin (IL)-6 in FLS stimulated differentiation of T<SUB>H</SUB>17 cells—crucial effectors of RA pathogenesis. Additionally, in the absence of IL-6 (<I>Il6</I><SUP>−/−</SUP> mice), overexpression of HIF-2α in joint tissues did not cause an RA phenotype. Thus, our results collectively suggest that HIF-2α plays a pivotal role in the pathogenesis of RA by regulating FLS functions, independent of HIF-1α.</P></▼2><▼3><P><B>Author Summary</B></P><P>Rheumatoid arthritis (RA) is a systemic autoimmune disorder characterized by chronic inflammation in joint tissues leading to destruction of cartilage and bone. Despite some therapeutic advances, the etiology of RA pathogenesis is not yet clear, and effective treatment of RA remains a significant, unmet medical need. Hypoxia is a prominent feature of inflamed tissue within RA-affected joints, and earlier work has implicated limited involvement of hypoxia-inducible factor (HIF)-1 α. We explored the role of a second HIF family member, HIF-2α, in RA pathogenesis. We showed that HIF-2α is markedly increased in the tissue lining the RA-affected joints. Notably and in contrast to HIF-1α, when overexpressed in normal mouse joint tissues, HIF-2α is sufficient to cause RA-like symptoms. Conversely, an HIF-2α deficiency blocks the development of experimental arthritis in mice. We discovered further that HIF-2α regulates RA pathogenesis by modulating various RA-associated functions of joint-specific fibroblast-like cells, including proliferation, expression of cytokines, chemokines, and matrix-degrading enzymes, and bone-remodeling potential. HIF-2α also increases the ability of these cells to promote interleukin-6–dependent differentiation of T<SUB>H</SUB>17 cells, a known effector of RA pathogenesis. We thus show that HIF-1α and HIF-2α have distinct roles and act via different mechanisms in RA pathogenesis.</P></▼3>

바이모달트램의 자동운전시스템 설계

류제(Ryu Je),황병일(Hwang Byoung-Il),이상남(Lee Sang-Nam),류희문(Ryu Hee-Moon),변윤섭(Byun Yeun-Sub) 한국철도학회 2008 한국철도학회 학술발표대회논문집 Vol.- No.-

Bi-modal tram is a new conceptual transit mean for public transportation integrating thoroughfare and railroad vehicle’s characteristics together. This paper describes about a software design which will be applied to an automatic driving system, which is called NCS (Navigation Control System), considering such multiplicity of mechanical characteristic. The NCS adopts propulsion, braking, and direction control functions for a tram and utilizes various sensors to fully take control over such functions. In this paper, we defined and analyzed the capabilities of the NCS. Those capabilities are designed with a UML 2.0 based object-oriented modeling technique. Moreover, to ensure the complete operation of such capabilities, a communication protocol (which is capable of controlling sensors, propulsion, brakes, and traveling directions) is designed here. Throughout the paper, firstly, all the NCS related functions are discussed in accordance with the equipments they are belonged to; secondly the UML modeling application techniques for the defined functions and protocols for the communications between equipments are introduced; and lastly a validation process for the design specifications is going to be discussed.

바이모달 저상굴절차량의 자동운전시스템을 위한 시뮬레이터 구현

류제(Ryu Je),황병일(Hwang Byoung-Il),이상남(Lee Sang-Nam),류희문(Ryu Hee-Moon),변윤섭(Byun Yeun-Sub) 한국철도학회 2009 한국철도학회 학술발표대회논문집 Vol.2009 No.5월

This paper discusses about the implementation of a simulator for the Navigation Control System(NCS) of bimodal tram. To operate a NCS of bimodal tram, values of all sorts of sensors installed in bimodal tram should be transmitted to the NCS, and the NCS calculates the measured sensor values to determine traveling direction, traveling speed, current position etc. The implementation of the simulator consists of a device applying driver’s input transaction function & virtual sensor program and a sub-rack device that controls communication with the NCS to evaluate navigation control function. The virtual sensor program can create routes (map), traveling profiles & seat information et cetera in order to transmit to the NCS, analyzes driver's input values and NCS output values to create virtual sensor values. The sub-rack device takes charge of communication with the NCS using CAN-OPEN, CAN-J1939, MVP protocols. This paper discusses about the implementation of the simulator and afterwards analyzes and evaluates the NCS simulation results.