http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
삼각파 비교 방식을 사용한 영구자석형 교류 서보전동기의 전류제어
전태원,이홍희 울산대학교 1991 공학연구논문집 Vol.22 No.1
최근 전동기의 과도 특성이 우수하고 정밀한 속도 제어가 가능하면서 제어루우프를 구현하기가 쉬운 시스템이 요구되어 왔다. 따라서 저관성, 소형, 고효율 등의 특성을 가진 영구자석형 교류전동기를 과도특성이 우수한 벡터제어기로 제어하는 방식을 도입하였다. 전동기 입력전압을 역기전력문과 고정자 임피던스 전압강하분으로 분리하여, 이 임피던스전압을 제어하므로 자속분 전류와 토크분 전류를 각각 독립적으로 제어하는 것이다. 이 벡터 제어루우프의 성능에 큰 영향이 잇는 전류제어 기법으로 전류제어 특성이 우수하고 비교적 구현하기 쉬운 삼각파 비교방식을 사용하였다. 이 벡터 제어루우프를 구성하고, 디지탈 시뮬레이션을 통하여 실현 가능성을 확인하였으며, 16비트 마이크로프로세서로 실제 구현하였다. 실험결과와 시뮬레이션 결과를 비교 분석 하였으며 전동기의 기동특성과 기타 과도특성을 보여주었다. Recently the development of motor speed control systems having both good dynamic performance and simple implementation has been reguired. to satisfy two requirements, the vector control scheme of the permanent-magnet AC servo motor having low inertia, low weight, and high efficiency is proposed. The input voltage of the motor is seperated into two parts, induced voltage and stator impedance voltage. Thus, by regulating the impedance voltage, the currents of the flux and the torque component are controlled independently. The current control strategy have great influence on the performance of vector control, and in this paper th ramp comparision controller is used, which has good current control performance and easy implementation. The proposed vector control strategy is verified through the digital simulation, and implemented by 16 bits microprocessor. Simulation and experiment results are compared for purposes of model verification and regulator evaluation, and in addition the starting and transient characteristics of motor are shown.
Human Search Patterns on Product Comparison Service
이홍희,이충권,유상진 한국산업정보학회 2009 한국산업정보학회논문지 Vol.14 No.3
It is important for firms to help customers find the products or information they need in order to increase sales and promote return visits to their websites. Hence, the presentation of product information is very important in e-commerce websites. In this research, we study how disposition styles can influence browsing patterns. The test results show that people are inclined to use feature information paths in the vertical disposition style and product information paths in the horizontal disposition style. With vertical disposition, users are more likely to follow feature information paths which may help them focus on comparisons across products.
이홍희,Van-Tung Phan,Brovanov Sergey,전태원 전력전자학회 2007 JOURNAL OF POWER ELECTRONICS Vol.7 No.3
In this paper, a proposed approach to improve the power factor of three-phase rectifiers and to stabilize the output voltage against load change is presented. The key elements of the given control strategy are small size, low cost, high performance, and simplicity. The proposed control strategy of switches is based on a prototype of three bi-directional switched consisting of four diodes and one IGBT. A control technique and operational procedure are also developed, both theoretically and experimentally. The experimental results clearly verify the theoretical analysis from the prototype connected to grid unity.
복수 Node Access 기법에 의한 제어용 전력선 통신망 구축
이홍희,김관수 울산대학교 2002 공학연구논문집 Vol.33 No.2
전력선을 이용하여 신뢰성 높은 데이터 통신을 하기 위해서는 다양한 변복조 방법 및 채널코딩의 적용이 필요하다. 본 논문에서는 이러한 변복조 및 채널코딩 가운데 FSK 변복조와 HDLC코딩 방식을 적용하여 전력선 데이터 통신시 발생하는 신호 감쇠와 잡음을 제거하고, 신뢰성 있는 데이터 전송환경을 구축하기 위해 전력선 통신용 모뎀을 CPLD를 바탕으로 한 ASIC으로 구현하고 실제환경에 적용하였다. When the power line is used for the data communication, it is necessary to abopt the various modulation-demodulation and channel coding methods in order to make the reliable data transmission. In this paper, the FSK modulation and HDLC coding methods are applied to the data communication for the improved transmission condition with no effective noise and signal attenuation. The power line transmission modem that operates with the proposed mothods in implemented using ASIC based on CPLD. Finally, the various experimental approaches are carried out to verify the proposed power system.
박진석,이홍희 울산대학교 2000 공학연구논문집 Vol.31 No.1
Gantry System과 같은 이송장치에 복수 전동기가 사용될 경우 이들 전동기 사이의 위치 동기 제어가 요구된다. 이 경우의 위치 동기운전은 두 전동기 사이에 위치 오차를 빠르게 보상할 수 있어야 하며 외란에도 강인한 특성이 요구된다. 이러한 특성을 만족시키기 위해 본연구에서는 퍼지 제어기법과 함께 슬라이딩 모드 제어기법을 병렬로 사용하여 시스템의 동특성과 함께 외란에도 강인한 새로운 제어방법을 제안한다. 제안된 알고리즘의 타당성을 증명하기 위해 교류 서보 전동기 시스템을 등가 모델링하여 모의실험을 행하였으며 이를 실험적으로 증명해 보였다. The position synchronization is required in case of driving multi motors which are applied to the moving systems like a gantry system. In this case, the position error between two motors should be compensated quickly and the control system must be robust to the disturbances. In order to satisfy these requirements, we propose a new control scheme which uses the fuzzy and the sliding mode techniques in parallel. In process of designing the proposed controller, the equivalent circuit model for AC servo system is used. In order to show the effectiveness of proposed scheme, both the computer simulations and the real experiments are performed.
誘導電動機負荷와 結合된 電流形인버터의 解析에 관한 硏究
李弘熙 울산대학교 1987 연구논문집 Vol.18 No.2
誘導電動機와 結合된 電流形인버터에 對한 解析을 바탕으로 시스템의 各 部 波形을 컴퓨터 시뮬레이션을 通해 豫測할 수 있는 方法을 提案했다. 또한 이 方法에 의한 시뮬레이션 結果를 實驗的으로 그 타당성을 확안해 보였다. By the analysis of the current source inverter linked with induction motor, this paper introduces how to estimate the wanted waveforms of this system. In order to estimate the waveforms, computer simulation is carried out and its results are proved experimentally.