http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황준연(Jun Yeon Hwang),김희종(Heui Jong Kim),문석균(Seog Kyun Mun),이세영(Sei Young Lee) 대한두경부종양학회 2007 대한두경부 종양학회지 Vol.23 No.2
About 20% of non-Hodgkin’ lymphoma occur in the extra-nodal region in the head and neck area and more than half of extra-nodal lymphoma in the head and neck area involves the Waldeyer’ ring. Malignant lym-phoma arising in the parotid glands are relatively rare, although 90% of all salivary gland lymphomas, appear in parotid gland and are classified as extranodal non Hodgkin’ lymphoma. We experienced one rare case of non-Hodgkin’ lymphoma in the right parotid gland, with a painless swelling of the cheek region as the chief complaint. We treated with CHOP(cyclophosphamide, 750mg/m 2 i.v. day1;doxorubicin, 50mg/m 2 i.v. day 1;vincristine, 1.4mg/m 2 i.v. day 1;prednisone, 50mg/m 2 orally days 1 to 5. repeat every 21 days) and Rituxi-mab combination therapy. We aimed to report here one case of non-Hodgkin’ lymphoma in the right parotid gland with review of literature.
박태언,황준연,임진성,윤영훈,Park, Tae-Eon,Hwang, Jun Yeon,Lim, Jin Seong,Yun, Young-Hoon 한국결정성장학회 2016 한국결정성장학회지 Vol.26 No.5
본 연구에서는, 실리카 분말과 왕겨의 혼합체로부터 탄화된 물질로부터, 탄화규소 (SiC) 분말이 합성되었다. 탄화왕겨와 실리카의 열탄화환원 반응을 통해 얻어진, SiC 시료는 XRD 회절 패턴, FE-SEM 및 FE-TEM을 통해 분석되었다. 시료들은 XRD 패턴에서, $35^{\circ}$ 부근의 (111) peak는 매우 높은 intensity를 나타내었고, $60^{\circ}$, $72^{\circ}$ 부근의 (220), (311) peak 등 탄화규소 결정상에 대한 peak pattern이 명확하게 관찰되었다. Ar 분위기에서 탄화왕겨와 실리카의 혼합비율이 6 : 4인 혼합물로부터 합성된 시료는 XRD 패턴에서 잔류카본이 검출되지 않았으며, hexagonal 결정상의 비율이 비교적 낮고, cubic SiC 결정상이 주도적으로 나타내었다. 탄화왕겨와 실리카의 혼합비율이 6 : 4인 경우에 합성된 시료는 $5{\mu}m$ 이하의 미세한 입자들이 관찰되었으며, TEM 분석결과에서, SiC 결정질상의 (110) 회절패턴 형태를 나타내었다. In this work, the SiC powders were synthesized through the carbonized matter from the mixture of silica powder and rice husks. The SiC powders, obtained from the carbothermal reduction reaction of silica and carbonized rice husks, were investigated by XRD patterns, XPS, FE-SEM and FE-TEM. In the XRD patterns, the specimens showed clearly very high strong peak of (111) plane near $35^{\circ}$ as well as weak (220) and (311) peak respectively at approximately $60^{\circ}$ and $72^{\circ}$. Under Ar atmosphere, the power synthesized from the mixture (in case of mixing ratio, 6 : 4) of carbonized rice husks and silica showed mainly cubic SiC crystalline phase showing relatively lower ratio of hexagonal phase without residual carbon in XRD pattern. In the TEM analysis, the specimen, synthesized from carbonized rice husks and silica with mixing ratio of 6 : 4 under Ar atmosphere, showed relatively fine particles under $5{\mu}m$ and a crystalline SiC phase of (100) diffraction pattern.
이병수,황준연,Lee, Byeong-Su,Hwang, Jun-Yeon 한국재료학회 1999 한국재료학회지 Vol.9 No.7
분산특성이 다른 두 종류의 Ag 분말과 점도가 다른 두 종류의 유리를 사용하여 Ag 후막 도체를 제조하고 이들이 후막의 미세구조에 어떠한 영향을 미치고 그 미세구조가 전기특성에 미치는 영향을 조사하였다. Ag 분말의 분산특성이 좋을수록 그리고 사용된 유리의 점도가 낮을수록 후막의 미세구조는 잘 발달된 치밀한 조직을 보였으며 면저항값도 감소하였다. 이는 Ag 분말의 분산특성이 좋을수록 용융 유리에 의한 Ag 입자들의 미세 재배치의 속도가 빨라지고, 또한 유리의 점도가 낮을수록 모든 미세구조 발전단계에서 그 속도가 증가하기 때문이며. 이러한 미세조직의 치밀화가 후막의 면저항값을 제어하기 때문이다. 소성시간이 증가하여도 더 이상 전기저항값의 저하가 없는 저항감소의 포화시간이 존재함을 확인하였으며, 이 포화시간 역시 후막의 미세구조에 크게 의존함을 알 수 있었다 Ag thick film conductors were fabricated with Ag powders having different degree of dispersion and glasses having different viscosity, and then the relationship between microstructure and electrical properties of the Ag films was investigated. Under the same processing condition. the Ag thick film that was prepared with the well-dispersed Ag powder and glass having low viscosity had denser microstructure and lower resistance than those of the film which was fabricated with the agglomerated Ag powder and glass having high viscosity It is believed to be due to the fast micro rearrangement kinetics when the well dispersed Ag powder was used, and all the microstructure development kinetics were impeded when low viscosity glass used. It was found that theme fast microstructure development kinetics resulted in the dense microstructure and the lower sheet resistance of the films. Also, the saturation time, at which at a given temperature no further decrease in the sheet resistance was obtained, was found to be shortened when well-dispersed Ag powder and low viscosity glass were used.
개별 수직성장된 나노튜브와 금속의 복합 구조체 제작 및 분석
장원석(Won Seok Chang),황준연(Jun Yeon Hwang),한창수(Chang Soo Han) 대한기계학회 2012 大韓機械學會論文集B Vol.36 No.1
탄소나노튜브의 기계적 특성과 금속의 전기적 특성을 이용할 수 있는 나노 복합구조체의 특성은 두 재료 사이의 계면이 중용한 역할을 한다. 본 연구에서는 나노임프린트 패터닝을 이용하여 촉매금속을 패턴하고 이를 이용한 개별 성장된 탄소나노튜브 위에 증기증착법을 이용하여 니켈을 증착한 나노구조체의 계면을 조사하였다. 이를 위하여 고해상의 투사전자현미경과 3 차원 원자 프로브 분석기를 이용하였다. 탄소나노튜브 위에서 성장된 나노결정의 경우 준 안정 상태인 조밀입방구조의 Ni3C 를 형성하는 것으로 나타났다. 이러한 특성을 이용한 나노복합체의 응용가능성을 살펴보았다. The properties of carbon nanotube-metal hybrid nanostructures are critically dependent on the structure and chemistry of the metal-carbon nanotube interface. In this study, the interface between nickel and multi-walled carbon nanotubes (CNTs) has been investigated using physical vapor-deposited (sputter-deposited) nickel onto the surface of freestanding carbon nanotube arrays processed by nano-imprint lithography (NIL). These interfaces have been characterized by transmission electron microscopy and 3D atom probe tomography. In the nickel nanocrystals growing on the CNT surface, a metastable hexagonal Ni3C-types phase appears to be stabilized. The structural stability of the nickel-CNT interface is also discussed and related to potential implications for the properties of these nanocomposites.