http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
금 격자-그래핀 하이브리드 구조 기반의 투명 전극 응용 연구
황순휘(Soonhwi Hwang),강준모,최성,박영철,이덕진,최재붕 (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
최근 그래핀의 높은 광학적, 전기적 특성을 이용하여 투명전극으로 응용하는 연구가 진행되고 있다. 본 연구에서는 화학 기상 증착법을 통하여 그래핀을 합성하고, 금 격자 패터닝과 AuCl3-CH3NO2 도펀트를 이용하여 그래핀의 면저항을 개선하였다. 금 격자-그래핀의 하이브리드 구조는 8 Ω/□ 면저항 특성을 나타내었으며, 이는 기존의 그래핀 한층 면저항 값인 350 Ω/□ 보다 매우 낮은 값을 나타내었다. 또한 그래핀의 적층과 화학적 도핑을 통해 추가적으로 6 Ω/□ 수준의 면저항 값을 확인하였다. 이를 통하여 낮은 면저항을 요구하는 투명 전극 분야에 그래핀-금 격자 하이브리드 구조를 적용 가능할 것으로 예상한다.
황순휘(Sun-Hwi Hwang),박도중(Do Joong Park),박영수(Young Soo Park),이경호(Kyoung Ho Lee),김영훈(Young Hoon Kim),이혜승(Hye Seung Lee),이혁준(Hyuk-Joon Lee),김형호(Hyung-Ho Kim),양한광(Han-Kwang Yang),이건욱(Kuhn Uk Lee) 대한외과학회 2007 Annals of Surgical Treatment and Research(ASRT) Vol.72 No.5
Liposarcoma is a mesenchymal malignant tumor which occurs most frequently in the limbs, retroperitoneum, and trunk: Although primary liposarcoma may occur anywhere adipose tissue is found, visceral locations are only rarely represented. Moreover, primary gastric liposarcoma is extremely rare. So, only a few cases of primary gastric liposarcoma have been reported in English literature. We describe the case of a 43-year-old woman presenting with melena, epigastric pain, general weakness. Esophagogastroduodenoscopy (EGD) showed a 6×4×3 ㎝ sized-mass which was located on the posterior gastric wall. By endoscopic ultrasonography and abdominal CT scan, we suspected gastric lipoma and performed the laparoscopic transgastric tumor resection by eversion method. Finally, it was confirmed as a gastric liposarcoma pathologically. Herein, we present a case of gastric liposarcoma which was resected by laparoscopic transgastric wedge resection.
이성헌,황순휘,김태균,양환석,윤영갑,김선주,Lee, Sung Hun,Hwang, Soon Hwi,Kim, Tae Kyun,Yang, Whan Seok,Yoon, Yeong Gap,Kim, Seon Ju 한국광학회 2021 한국광학회지 Vol.32 No.2
본 논문에서는 고출력 광섬유 레이저의 핵심 부품인 대구경 광섬유 엔드캡을 제작하는 장비를 설계 및 제작하였으며, 제작장비를 이용하여 대구경 광섬유 엔드캡을 제작하였다. 대구경 광섬유 엔드캡 제작장비는 레이저 광을 조사하여 접속 열원으로 사용하기 위한 CO2 레이저 광원부, 대구경 광섬유와 엔드캡의 위치를 이송하기 위한 정밀 스테이지 조립체, 스테이지 조립체와 연동되어 융착 시 정렬에 사용되는 비전 시스템으로 구성되어 있다. 레이저 광원의 출력은 스테이지 조립체와 연동되어 출력을 제어하며, 비전 시스템으로 대구경 편광유지 광섬유의 편광축을 정렬할 수 있도록 제작되었다. 자체 제작한 장비를 이용하여 클래드 직경이 400 ㎛인 대구경 편광유지 광섬유와 10(W)×5(D)×2(H) ㎣의 엔드캡을 레이저 융착하여 대구경 광섬유 엔드캡을 제작하였다. 제작된 대구경 광섬유 엔드캡의 신호광 삽입손실, 소광률 및 빔품질(M2)은 각각 0.6%, 16.7 dB, M2x=1.21, M2y=1.22로 측정되었다. In this paper, we design and construct the equipment to manufacture large-diameter optical fiber end caps, which are the core parts of high-power fiber lasers, and we fabricate large-diameter optical fiber end caps using the home-made equipment. This equipment consists of a CO2 laser as a fusion-splice heat source, a precision stage assembly for transferring the position of a large-diameter optical fiber and an end cap, and a vision system used for alignment when the fusion splice is interlocked with the stage assembly. The output of the laser source is interlocked with the stage assembly to control the output, and the equipment is manufactured to align the polarization axis of the large-diameter polarization-maintaining optical fiber with the vision system. Optical fiber end caps were manufactured by laser fusion splicing of a large-diameter polarization-maintaining optical fiber with a clad diameter of 400 ㎛ and an end cap of 10×5×2 ㎣ (W×D×H) using home-made equipment. Signal-light insertion loss, polarization extinction ratio, and beam quality M2 of the fabricated large-diameter optical fiber end caps were measured to be 0.6%, 16.7 dB, and 1.21, respectively.