http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마리아나 해구에 인접한 서태평양 심해평원의 정점 WP21GPC04에서 수집된 해양 퇴적물의 깊이에 따른 원소 및 광물 분포 변화
허준태,윤서희,김종욱,고영탁,이용재 대한자원환경지질학회 2023 자원환경지질 Vol.56 No.5
본 연구에서는 2021년 WP21 탐사를 통해 수집한 마리아나 해구 주변 해양퇴적물(WP21GPC04)에 대한 깊이 별 원소 분포 및 광물 구성에 대한 분석을 수행하였다. 마이크로 X선 형광법(μ-XRF)을 통해 분석된 WP21GPC04 해양 퇴적물의 평균 화학조성은 깊이에 따른 특징적인 변화 없이 평균 SiO2 53.91 wt%, FeO 4.48 wt%, Al2O3 16.56 wt%, MgO 2.56 wt%, CaO 4.79 wt%, Na2O 3.52 wt%, K2O 5.48 wt%를 보이며, 이를 Mariana pelagic clay와 평균 해양 퇴적물의 원소 분포인 GLOSS (global subducting sediment)의 성분과 비교하였다. 방사광 X선 회절법(Synchrotron-XRD)을 이용하여 분석된 광물 구성은 깊이에 따라 다소 차이가 있음을 확인하였다. 석영, 운모, 사장석은 모든 깊이에서 확인된 반면 녹니석은 상대적으로 얕은 깊이에서만 확인되었고, 제올라이트 계열인 필립사이트와 휼란다이트는 퇴적 깊이에 따라 점진적인 함량의 변화를 보였다. 이는 해양 퇴적물의 퇴적 시기에 따른 환경에 변화가 있었거나 유사한 상 안정성에 의한 공생관계로 해석될 수 있다. 본 연구 결과는 서태평양 마리아나 해구 주변의 퇴적 환경 변화와 섭입하는 해양 퇴적물의 상 분포 및 거동에 따른 섭입대 특성 연구에 대한 기초 자료를 제공할 것이다. This study reports depth-dependent elemental distribution and mineral abundance of the oceanic sediment sample (WP21GPC04) near the Mariana Trench collected during the WP21 expedition in 2021. The elemental distribution determined by μ-XRF shows no significant differences with varying depth, with an average SiO2 53.91 wt%, FeO 4.48 wt%, Al2O3 16.56 wt%, MgO 2.56 wt%, CaO 4.79 wt%, Na2O 3.52 wt%, K2O 5.48 wt%, similar to the average chemical composition of global subducting sediments (GLOSS). The mineral abundances analyzed using synchrotron XRD, however, vary with depth. While quartz, mica, and plagioclase were identified at all depths, chlorite was found at shallow depths, and zeolite group minerals, phillipsite and heulandite, showed a gradual change in phase fraction with depth. This suggests a change in sedimentation and alteration environments in the region, or the potential for coexistence emerges due to similar sediment stability. Overall, this study will provide a basis for the future investigations on the evolution of sedimentary environment near the Mariana Trench in the western Pacific Ocean and the phase distribution and the behavior of subducting oceanic sediments, which will affect the lithological and geochemical characteristics of the Mariana susduction system.
저온 프린팅 공정을 통한 콜라겐/실크-피브로인/세포외기질이 포함된 조직재생용 세포담체 개발
허준태(JunTae Huh),이형진(Hyeongjin Lee),여명구(MyungGu Yeo),김용복(YongBok Kim),양지훈(Gi-Hoon Yang),구영원(YoungWon Koo),여미지(Miji Yeo),임정형(JungHyung Lim),김근형(GeunHyung Kim) 대한기계학회 2016 대한기계학회 춘추학술대회 Vol.2016 No.12
In tissue engineering, biomaterials must be biocompatible, biodegradable, and mechanically stable to be used for biomedical scaffold. Among various biomaterials, natural polymers are widely used for great biocompatibility. However, due to their low mechanical properties, it has been a challenge to build desired 2D/3D structure using natural polymers. To overcome this problem, in this study, we used low temperature 3D printing to create a scaffold with collagen/silk-fibroin(SF)/extracellular matrix(ECM). Then, fibroblast cells were grown on the fabricated scaffold. Various in vitro cellular activities (cell-viability, MTT assay) for pure collagen, pure SF, collagen/SF, and collagen/SF/ECM scaffolds were compared. The collagen/SF/ECM scaffold showed 30% higher cell metabolic activities than pure collagen scaffold.