http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최영재(Choi, Youngjae),김현석(Kim, Hyunsok) 한국항만경제학회 2016 韓國港灣經濟學會誌 Vol.32 No.2
본 논문은 2000년 1월부터 2014년 10월까지의 시계열 자료를 사용하여 이자율과 운임이 선가에 미치는 영향을 실증분석하였다. 선행연구와 달리, 동태적 고든(Gordon) 모형을 통하여 이자율이 할인율로써 선가에 미치는 영향을 고려하였으며, 이자율과 운임이 선가에 미치는 동태적 영향을 파악하기 위해 벡터자기회귀모형과 충격반응분석, 예측오차분산분해를 활용하였다. 그 결과는 다음과 같다. 먼저 벡터 자기회귀모형의 추정은 선가와 이자율이 유의한 음(-)의 상관성을 가지며, 선가와 운임의 유의한 양(+)의 관계가 존재한다는 것을 보여주었다. 이는 선가의 동태적 고든(Gordon) 모형 하에서 선가는 이자율과 운임에 의존함을 의미한다. 둘째, 이자율과 운임의 동태적 영향이 지속되는 기간을 파악하기 위해 충격반응분석을 실시하였다. 그 결과, 이자율과 운임의 충격에 대한 선가의 반응은 모두 약 7개월 간 지속되는 것을 확인하였다. 마지막으로 예측오차분산분해의 실증결과는 선가 변동을 설명하는데 있어 운임의 영향이 이자율보다 상대적인 비중이 크다는 것을 보여주었다. This study empirically examines the dynamic specification of the ship price model based on a vector autoregressive model and data covering from January 2000 to October 2014. Our results are summarized as follows: first, the relationship between ship price and interest rate shows significantly negative and the relationship between ship price and freight rate shows positive. It provides consistent implication that ship price depends on interest rate and freight rate under the dynamic Gordon model. Second, we apply an impulse response analysis to ship price and find the responses of the ship price from both factors, interest rate and freight rate, which affect during seven periods approximately. Finally, the results of a variance decomposition indicate that freight rate is more important than interest rate on the ship price.
시뮬레이션을 활용한 효율적인 하푼 유도탄 정비인력 운영 연구
최영재(Youngjae Choi),마정목(Jungmok Ma) 한국시뮬레이션학회 2021 한국시뮬레이션학회 논문지 Vol.30 No.1
일반적으로 유도탄 정비의 핵심적인 군수지원요소는 수리부속 재고수량과 정비 소요시간이며, 본 연구는 정비 소요시간과 가동률 간의 상관관계 영향을 분석하였다. 본 연구의 목적은 하푼 유도탄 정비인력 기술수준을 고려하여 정비팀을 분류하고 정비 소요시간 변화에 따라 유도탄 가동률에 미치는 영향을 분석하여 정량적인 분석 결과를 제시하는 것이다. 먼저, 하푼 유도탄에 대한 정비데이터와 정비 소요시간을 측정한 데이터를 바탕으로 실제 유도탄 정비절차와 유사한 시뮬레이션 모델을 구성하고 결과값을 분석하였다. 정비인력 기술수준을 고려하여 정비팀을 구성하였을 때, 전문성이 높은 팀일수록 정비 소요시간이 단축되었으며 가동률에 미치는 영향이 크다는 것을 시뮬레이션 결과값을 통해 확인할 수 있었다. 이러한 정량적 분석결과값은 유도탄 정비인력 구성 및 운영방안에 대한 정책결정에 기여할 수 있을 것이다. The maintenance of the guided missiles typically requires the efficient management of spare parts and maintenance time. This study analyzed the impact of the maintenance time on operational availability. This study classifies the maintenance team with consideration of the skill level of the Harpoon guided missile maintenance and the goal is to analyze the impact on the operational availability with the skill levels quantitatively. Based on the real maintenance data of Harpoon guided missiles, a simulation model is constructed and analyzed. The analysis of the simulation result shows the trade-off between the maintenance time and operational availability. It is expected that the simulation model can help the maintenance policies of guided missiles.
최영재(Youngjae Choi),안진수(Jinsoo Ahn),이인성(Insung Lee),배홍열(Hongyoul Bae),문지웅(Jiwoong Moon),이종규(Jonggyu Lee) 한국신재생에너지학회 2016 신재생에너지 Vol.12 No.4
This paper presents the performance characteristics of a planar type solid oxide fuel cell (SOFC) stack under various internal reforming and fuel utilization conditions. The Research Institute of Industrial Science &Technology (RIST) developed the 5-cell stack using a 20×20 ㎠ anode supported planar cell with an active area of 324 ㎠. In this work, current-voltage characteristic test, fuel utilization test, continuous operation, and internal reforming test were carried out sequentially for 385 hours at a furnace temperature of 700℃. The influence of fuel utilization and internal reforming on the stack performance was analyzed. When the 5-cell stack was tested at a current of 162A with a corresponding fuel utilization of 50~80% (internal reforming of 50%) and air utilization of 15%, the stack power was approximately 637~650W. Under continuous operation conditions, performance degradation rate was 1.89%/kh for 262 hours. The internal reforming characteristics of the stack were measured at a current of 162A with a corresponding fuel utilization of 60~80% (internal reforming of 50~90%) and air utilization of 15%. As fuel utilization and internal reforming ratio increased, the stack power was decreased. The stack power change due to the internal reforming ratio difference was decreased with increasing fuel utilization.
최영재(Choi, YoungJae),이인성(Lee, InSung),전중환(Jun, JoongHwan) 한국신재생에너지학회 2010 한국신재생에너지학회 학술대회논문집 Vol.2010 No.11
고체 산화물 연료전지(SOFC) 시스템은 스택과 기계적 주변 장치인 MBOP(Mechanical Balance of Plant), 그리고 전기적 주변장치인 EBOP(Electrical Balance of Plant)로 구성되어있다. SOFC는 일반적으로 700?C 이상의 고온에서 작동되기 때문에 효율적인 열 이용 및 열 관리가 중요하다. SOFC 시스템의 MBOP에는 상온의 연료가스들을 고온으로 가열하여 스택에 유입 시기키 위한 열교환기 및 촉매연소기 등의 장치들이 필요하며, 효율적인 열관리를 위해서는 고온에서 작동하는 장치들을 한곳에 통합하여 구성하는 것이 필수적이다. 본 연구에서는 SOFC 시스템의 MBOP(Mechanical Balance of Pant) 중 고온부에 해당하는 촉매연소기, 열교환기 및 스택이 통합된 스택 모듈을 제작에 앞서 개념 검증을 위해 열교환기 및 촉매연소기로 이루어진 프로토타입(prototype)의 SOFC 모듈평가 장치를 제작하였다. 열교환기는 Plate형으로 총 6개로 구성되어 있으며, 연료극과 공기극 가스라인에 각각 3개씩 배치하여 스택에 유입되는 연료 및 공기가 촉매연소기에서 나오는 고온의 배가스와 열교환되어 가열되도록 구성하였다. 촉매연소기는 honeycomb 타입의 촉매를 사용하였고, 촉매연소기로 유입되는 연료극 배가스와 공기의 균일혼합과 hot spot을 방지하기 위한 장치를 삽입하여 제작하였다. 제작된 SOFC 모듈평가장치는 시운전을 통해 각 장치의 성능 확인 후 반응면적이 20{times}20cm² 인 단전지를 적층하여 연계 운전을 수행하였다.