http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sloped-LOM 방식 3D 프린터를 이용한 비정형 EPS 거푸집 제작 공법 개발
안희재,이동윤,지우종,이우재,조훈희,Ahn, Heejae,Lee, Dongyoun,Ji, Woojong,Lee, Woojae,Cho, Hunhee 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.2
Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology. 최근 비정형 건축물이 한 나라의 기술적 우월성을 나타내는 새로운 척도로 부상하기 시작하면서 비정형 건축물을 효율적으로 제작하는 기술이 중요해지고 있다. 하지만 기존의 목재, 철재 거푸집 등을 CNC 기술로 가공하여 비정형 거푸집을 제작하는 방식은 제작시간과 재료 비용 측면에서 한계점이 존재한다. 따라서 본 연구에서는 S-LOM 방식의 3D 프린팅 기술을 통한 비정형 EPS 거푸집 제작 공법을 개발하고 제작 프로세스를 제시하였다. 또한 실물 모형 시험을 통해 기존 CNC 밀링 기술과의 제작시간 및 정밀도에 대한 비교 분석을 실시하였다. 연구결과, S-LOM 방식의 3D 프린팅 기술을 활용할 경우 CNC 밀링 기술 대비 약 57.4%의 제작시간 단축 효과가 있었다. 또한 S-LOM 방식의 3D 프린팅 기술의 경우 설계도면 대비 약 20.5mm의 오차의 최대 절댓값이 발생하였다. 본 연구의 결과는 거푸집 제작시간과 정밀도 측면에서 S-LOM 방식 기술의 현장 적용 가능성을 확인하여, S-LOM 방식 기술의 개선 및 공법 활성화에 기여할 수 있을 것으로 사료된다.
Fuzzy DEMATEL 방법을 활용한 건설산업 노동생산성 영향요인 구조분석
이찬우 ( Lee Chanwoo ),조훈희 ( Cho Hunhee ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.1
Improving productivity in industries is a very critical issue, and improving labor productivity is especially important in construction industry, which is a labor-intensive industry. However, researches on labor productivity in construction industry are insufficient, and most of previous studies have limitations in terms of specificity and logic. In this study, fuzzy DEMATEL method was used to structural analyze of influence factors for labor productivity in construction industry based on previous researches and expert survey. The result of this study contributes to deriving priorities for improving labor productivity.
국내 건설사업관리 기술인력 역량평가 개선모델(I<sup>2</sup>CEC)
강성미,차민수,이우재,지우종,조훈희,유위성,Kang, Seongmi,Cha, Minsu,Lee, Woojae,Ji, Woojong,Cho, Hunhee,Yoo, Wisung 한국건설관리학회 2020 한국건설관리학회 논문집 Vol.21 No.2
ICEC는 경력, 학력, 자격 등 건설기술인의 역량을 정량화하여 종합한 뒤 해당점수에 따라 건설기술인에게 특급, 고급, 중급, 초급 등 4가지 기술등급을 차등 부여함으로써 기술 인력의 효율적 관리 및 적재적소로의 배치를 목적으로 도입된 제도이다. 하지만 시행 7년 차에 접어든 2020년 현재, ICEC는 본래의 도입취지와는 달리 인력배치기준, 역량지수 배점기준 및 기술등급 구분 등에 있어 많은 문제점들이 나타나고 있다. 이에 본 연구는 현행 건설기술인 역량지수(ICEC)에 기반 한 기술인력의 운영 및 평가체계의 문제점을 도출하고 건설기술인의 역량에 비례하는 경력지수를 제시함으로써 역량평가 개선모델인 I<sup>2</sup>CEC를 개발하였다. 그 결과, 초급 인정을 위한 최소 역량지수를 낮춰 건설사업관리 기술인력의 신규진입이 가능하며, 건설기술인의 실제 역량에 부합하는 경력지수 산정이 가능하다. 본 연구는 국내 건설업의 경쟁력 제고를 위한 효율적인 인력양성 및 경력관리 시스템 구축에 기여할 것으로 기대된다. The ICEC (Index of Construction Engineer's Competency) quantifies the competence of construction engineers using such parameters as experience, education, and qualifications and assigns four technical grades (expert, advanced, intermediate, and beginners) to construction engineers according to their scores for the efficient management and loading of technical personnel. However, as of 2020, the seventh year since its implementation, ICEC has shown many problems in its application, unlike its intended purpose. So institutional supplementation is required to provide improvement measures that can cope with the changing labor market environment and complement the current ICEC. Therefore, this study examined the current status of the career management system after the introduction of the ICEC, suggested a career index proportional to the competence of construction engineers from the beginner to the expert level, and developed an effective capability evaluation model I<sup>2</sup>CEC. The improved model presented in this study provides a means to comprehensively judge the performance, experience, and the professional work abilities of construction management engineers. Furthermore, the results of this study are expected to contribute to the development of efficient manpower and career management systems for enhancing the competitiveness of the domestic construction industry.
국가 기초 통계자료 환경변화에 따른 건설공사비지수 개선
강태경,백승호,김창원,조훈희,Kang, Taikyung,Baek, Seung-Ho,Kim, Chang-Won,Cho, Hunhee 한국건설관리학회 2015 한국건설관리학회 논문집 Vol.16 No.4
우리나라의 건설공사비지수는 지난 2004년부터 매월 발행되고 있다. 이 지수는 공사비 실적자료의 갱신과 공사비 변동분석, 시장가격의 평가에 직간접적으로 활용되어 왔다. 그런데 이 지수는 한국은행의 산업연관표와 생산자물가지수를 이용하는 가공통계자료이기 때문에, 이들 기초통계 자료에 변화가 있을 경우, 지수 작성모델의 변경이 반드시 필요하다. 최근 한국은행은 생산자물가 지수와 산업연관표의 작성원칙과 기준연도를 변경하였다. 이에 본 연구에서는 최근 변경된 기초통계자료의 내용과 그 영향을 분석하고, 이를 토대로 건설공사비지수를 새롭게 개선하였다. 또한 기존의 생산자물가지수 등과 그 편제 품목 및 가중치 변화 등을 분석함으로써 개선된 지수의 타당성을 검증하였다. Construction cost index (CCI) has been published for last 10 years, it's contributed to update the historical cost data, analysis cost fluctuation and evaluate the market price for construction works with direct or indirect manner. CCI is a secondary or processed statistics using the basic statistics of input output table (IO table) and producer price index (PPI) from the Bank of Korea (BOK). So once the basic statistics change, it is required to modify the calculating model of CCI. Recently the BOK changed some fundamental principles and the base year (from 2005 to 2010), that can be used in IO table and PPI. This research analyzed the recent revision of basic statistics and their impacts on CCI, and improved the previous CCI model in response to it. Also the validity of new CCI was verified by analyzing the items and weights utilized in CCI and comparing the related index.
김주헌 ( Kim Joo-heon ),신윤석 ( Shin Yoonseok ),조훈희 ( Cho Hunhee ),강경인 ( Kang Kyung-in ) 한국구조물진단유지관리공학회 2009 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.13 No.2
Recently, domestic government tries to supply with public rental housings up to the supplying rate of developed countries. However, as their inventories and deterioration are increased, it is important to manage their maintenance effectively. Therefore, this paper presents the direction of the management of public rental housing as the concept of the asset through inquiring oversea cases. In doing so, required works and their roles are identified for effective asset management.
구조 부재의 형상적 특성 기반의 실내 포인트 클라우드 데이터의 표준화 알고리즘 개발
오상민 ( Oh Sangmin ),차민수 ( Cha Minsu ),조훈희 ( Cho Hunhee ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.1
As the shape and size of detectable objects diversifying recognition and segmentation algorithms have been developed to acquire accurate shape information. Although a high density of data captured by the repetition of scanning improves the accuracy of algorithms the high dense data decreases the efficiency due to its large size. This paper proposes standardization algorithms using the feature of structural members on indoor point cloud data to improve the process. First of all we determine the reduction rate of the density based on the features of the target objects then the data reduction algorithm compresses the data based on the reduction rate. Second the data arrangement algorithm rotates the data until the normal vector of data is aligned along the coordinate axis to allow the following algorithms to operate properly. Final the data arrangement algorithm separates the rotated data into their leaning axis. This allows reverse engineering of indoor point clouds to obtain the efficiency and accuracy of refinement processes.