http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
정희숙 ( Hee Suk Jung ),이현주 ( Hyun Ju Lee ),송형운 ( Hyoung Woon Song ) 한국농업기계학회 2016 한국농업기계학회 학술발표논문집 Vol.21 No.2
연동 비닐온실은 폭설시 최대적설심 이상이 되면 온실붕괴와 같은 피해가 발생되기 때문에 최대적설심이 되기 전에 제설작업이 매우 중요하다. 따라서 최대적설심이 되기 전에 적설률에 따른 제설 성능을 평가하였다. 안전율을 고려하여 적설률은 최대적설심 대비 각각 70%와 50%로 비교평가 하였으며 제설제 유량은 150, 170 ml/min에서 각각 비교하였다. 적설률과 유량에 대한 성능평가를 실시한 결과, 안전율과 제설액 사용량을 고려하여 적설률 50%일 때 제설작업을 수행하는것이 효과적일 것으로 판단되며 제설제 유량은 150 ml/ min 일 때가 적합하였다. 또한 지속적인폭설 시 비닐온실의 구조안정성을 확인하기 위하여 자동제설장치의 장시간 성능평가를 실시하였다. 최대적설하중을 기준으로 적설률 50%일 때 제설을 반복적으로 실시하였으며 5시간동안 지속적인 폭설이 내릴 경우를 모사하여 인공강설을 유지하였고 제설 cycle은 총 38회로 반복운전 하였다. 38 cycle(5 hr)동안 비닐온실 지붕이 단위면적당 받는 하중은 최대 3.8 kg/m²으로 최대적설하중의 80% 수준을 유지하였다. 또한 30 cycle 이후에는 단위면적당 하중이 최대적설하중의 약 58~65 % 수준으로 감소하는 경향을 나타내어 안정적인 제설 성능을 확인하였다.
TPU 재질을 적용한 다목적 고액분리 모듈의 여과판 구조해석
정희숙(Hee Suk Jung),오두영(Doo Young Oh),고동신(Dong Shin Ko),송형운(Hyoung Woon Song) 유기성자원학회 2017 유기물자원화 Vol.25 No.1
기존 국내 여과판의 재질은 주로 polypropylene 소재의 여과판을 사용하였으며 그 이유는 성형성이 좋고, 가격이 저렴하며 매우 보편적으로 보급된 소재이기 때문이다. 그러나 고압에 의해 한번 뒤틀려진 polypropylene 소재 여과판은 재사용이 어려우며 가압형 고액분리모듈의 연속 운전에 문제를 야기할 수 있다. 따라서 기존 polypropylene 소재보다 성능이 뛰어난 TPU(Thermoplastic Poly Urethane) 소재개발을 위해 새로운 소재에 대해 설계된 여과판의 구조적 안정성을 해석적 기법을 통해 예측하였다. 20 bar의 압력하중 하에서 TPU를 적용한 여과판은 최대 변형량이 27.85 MPa로 나타났으며 이 값은 TPU 응력-변형률(Stress-Strain) 한계치 이하 값으로 여과판 재질에 대한 구조적 안정성을 확보하였다. Polypropylene is the main existing material in the domestic market being used for the filter plate because of its moldability, low cost, and commercial availability. Polypropylene filter plate once distorted due to the high-pressure during operation may cause the problem in the continuous operation of the solid-liquid separation module. Thermoplastic Poly Urethane (TPU) can be a high-performance alternative material for the filter plate in the solid-liquid separation module of the dehydration process. Hence, to predict and evaluate the TPU for structural stability in the filter plate through analytical techniques designed and experimental verification is essential. As a result, TPU filter plate had maximum strain of 27.85 MPa at 20 bar pressure condition. This result is less than TPU stress-strain limit, which ensures the structural stability of the TPU material.
전기화학적 산화에 의한 페놀함유 폐수 내 시안 및 암모니아성 질소 처리 특성 연구
정희숙 ( Hee Suk Jung ),이은실 ( Eun Sil Lee ),김우현 ( Woo Hyun Kim ),김호 ( Ho Kim ),최창식 ( Chang Sik Choi ) 한국수처리학회 2012 한국수처리학회지 Vol.20 No.4
This research has been performed to study electrochemical treatment of cyanide and ammonia in phenolic wastewater. The particular advantages of electrochemical treatment include high efficiency, ambient operating conditions, small equipment sizes, minimal sludge generation. Organic compounds and ammonia were removed through electrochemical treatment. The experiments were performed insight the effect NaCl concentration and phenol concentration change on organic compounds and ammonia decomposition efficiency. Cyanide and ammonia prefer indirect oxidation over direct oxidation, and that the selectivity of electrochemical oxidation for cyanide was higher than for ammonia. The results in this study suggested that Electrochemical oxidation was capable of removing cyanide, ammonia and organic compounds from industrial wastewater.