http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
약물 투여에 따른 기니피그 대장 운동 측정을 위한 압력센서 개발
박재순,박정호,김응보,조성환,장수정,정연호,Park, Jae-Soon,Park, Jung-Ho,Kim, Eung-Bo,Cho, Sung-Hwan,Jang, Su-Jeong,Joung, Yeun-Ho 한국전기전자재료학회 2016 전기전자재료학회논문지 Vol.29 No.1
In this paper, in order to quantify the peristalsis occurrence in a guinea pig's large intestine, a miniaturized air-gap capacitive pressure sensor was fabricated through micro-electro-mechanical system (MEMS). The proposed pressure sensor is a two-layered biocompatible polyimide substrate consisting of an air-gap capacitive plates between the substrates. The proposed pressure sensor was designed with a careful consideration of the structure and motility mechanism of the guinea pig's large intestine. Artificial pellets were mounted on a prototype pressure sensor to provide some redundancies in the form of size and shape of the guinea pig feces. Capacitance of a prototype sensor was recorded to be 2.5 ~ 3 pF. This capacitance value was later converted to count value using a lab fabricated data conversion system. Sensitivity of the pressure sensor was recorded to be below 1 mmHg per atmospheric pressure. During in vivo testing, artificial peristalsis caused by drug injection was measured by inserting the prototype pressure sensor into the guinea pig's large intestine and pressure data obtained due to artificial peristalsis was graphed using a labview program. The proposed pressure sensor could measure the pressure changes in the proximal, medial, and distal parts of the large intestine. The results of the experiment confirmed that pressure changes of guinea pig's large intestine was proportional to the degree of drug injection.
홍도관(Do-Kwan Hong),우병철(Byung-Chul Woo),구대현(Dae-Hyun Koo),정연호(Yeon-Ho Jeong),김종무(Jong-Moo Kim),조윤현(Yeun-Hyun Cho) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문은 마이크로 터빈용 전동발전기 500W, 전동 시200 krpm 발전 시 440 krpm의 초고속 전동 전동기를 개발 및 제작하는데 있어서 로터의 고강도 sleeve와 영구자석(permanent magnet) 및 앞뒤의stub shaft와의 열박음 시 열박음량에 따라서 구조강도해석을 열박음 이론식과 2차원 축단면 모델과 2차원 축대칭 모델에 대해서 유한요소해석을 이용하여 비교하였다. Sleeve의 가열온도에 의한 팽창량은 열박음을 위한 간섭량 보다는 크게 되어야 열박음이 가능하다. 열박음량에 따라서 각 소재에 발생하는 최대응력을 비교하였다. 축의 길이방향으로 열에 의한 변형량 뿐만 아니라 열박음에 의한 응력이 모두 다르기 때문에 로터 모델의 길이방향으로 고려해야하며 정상운전조건에서의 회전속도와 온도상승조건 시 열박음부위의 슬립과 구조응력상태를 평가하였으며 안전율을 제시하였다.