http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 빔 위성 통신 시스템을 위한 공평성 기반 빔 대역폭 할당
정동현,유준규,Jung, Dong-Hyun,Ryu, Joon-Gyu 한국정보통신학회 2020 한국정보통신학회논문지 Vol.24 No.12
본 논문은 다수의 단말이 다중 빔 위성을 통해 정보를 중심국으로 전송하는 위성 통신 시스템을 고려한다. 위성은 위상 배열 안테나를 탑재하여 서로 다른 대역폭을 가지는 다수의 스팟 빔을 형성한다. 빔 대역폭 할당의 공평성을 최대화하는 최적화 문제를 형성하고 해를 얻기 위한 두 가지 휴리스틱 알고리즘(반복적 빔 대역폭 할당, 자원 요청 비율 기반 빔 대역폭 할당)을 제안한다. 반복적 빔 대역폭 할당 알고리즘은 반복적으로 자원 요청량 대비 할당 대역폭의 비율을 균등화시키며, 자원 요청 비율 기반 빔 대역폭 할당 알고리즘은 요청량 대비 할당량 비율을 이용해 빔 대역폭을 계산한다. 모의실험을 통해서 반복적 빔 대역폭 할당 알고리즘이 최적의 해와 매우 가까운 공평성 성능을 가진다는 것을 확인하였다. 또한, 자원 요청 비율 기반 빔 대역폭 할당 알고리즘은 반복적 빔 대역폭 할당 알고리즘보다 계산 복잡도가 낮은 대신 더 낮은 공평성 성능을 가진다는 것을 확인하였다. In this paper, we investigate a multi-beam satellite communication system where multiple terminals transmit information signals to the gateway via a satellite. The satellite is equipped with phased array antennas to form multiple spot beams of which bandwidths are not identically allocated. We formulate an optimization problem to maximize fairness of beam bandwidth allocation. In order to solve the problem, we propose two heuristic algorithms; iterative beam bandwidth allocation (IBBA) and request ratio-based beam bandwidth allocation (RRBBA) algorithms. The IBBA algorithm iteratively equalizes the ratio of allocated bandwidth of each beam to their resource request while the RRBBA algorithm allocates beam bandwidth calculated from the ratio. Simulation results show that the IBBA algorithm has close fairness performance to the optimum while the RRBBA algorithm has less performance than the IBBA algorithm at the price of reduced computational complexity.
정동현 ( Dong Hyun Jung ),백원석 ( Won Seok Baek ),김승호 ( Seung Ho Kim ),전영남 ( Young Nam Chun ) 조선대학교 공학기술연구원 2008 공학기술논문지 Vol.1 No.1
This study produces absorbent through physical and chemical activation. Optimum activation conditions are established from changing the variables that are CO2 input amount, chemicals mixing rate, activated temperature and activated time. As result of this study, Physical activation method is confirmed in case of CO2 activation that CO2 input amount “80 ml/min”, activated temperature “700℃” and activated time “90 min”. At the time, iodine adsorptivity and specific surface area shown that 272.53 mg/g and 115.04 ㎡/g. Chemical activation method is confirmed with optimum condition among chemicals in case KOH activation that activated temperature “600℃”, KOH mixing rate “1:1”, activated time “90min”. At the time, iodine adsorptivity and specific surface area shown that 412.0 mg/g and 163.92 ㎡/g. Also, the pore development and characteristic was confirmed by nitrogen adsorption and SEM.
하수슬러지의 수증기 활성화법을 이용한 흡착제 제조와 흡착특성
정동현(Dong Hyun Jung),전영남(Young Nam Chun) 大韓環境工學會 2007 대한환경공학회지 Vol.29 No.5
현재 슬러지의 처리는 주로 해양투기에 의해 진행되는데 런던협약에 의해 슬러지 내 중금속 함량에 따라 점진적으로 해양투기가 완전 금지되어진다. 이에 하수슬러지의 안정적 처리 방안이 시급히 검토되어야 한다. 그 대책으로 최근 슬러지의 능률적이고 친환경적인 처리를 위한 방법 중 하나로 활성화를 통한 흡착제 제조가 부각되고 있다. 본 연구는 하수슬러지를 수증기 활성화법을 이용하여 흡착제로 활용하기 위한 기초연구로서 양질의 흡착제를 제조하기 위한 변수별 연구를 통한 최적 활성화조건을 연구하였다. 그 결과 요오드 흡착능을 기준으로 하여 변수별 연구를 통해 수증기 주입량 30 mL/hr, 활성화 온도 500℃, 활성화 시간 60분으로 선정되었다. 이 때 요오드 흡착능과 수율은 228.4 mg/g, 77.23%로 나타났다. 또한 질소 흡착, SEM, EDS를 이용하여 수증기 활성화에 따른 세공 발달, 비표면적, 평균 세공경 및 화학적 성상과 함량을 파악하였다. 수증기 활성화를 통해 발달되는 세공은 주로 미세 세공임을 확인하였다. Recently, the treat of sludge is usually progressed by ocean disposal. But it will be totally banned by content of its heavy metal according to London Dumping Convention, gradually. The stable way of treat of sewage sludge should be examined urgently. To solve the problem, recently, there are efficient and environment-oriented method. One of them is to produce absorbent through the activation. This study produces absorbent through steam activation. As basic experiment, optimum activation condition for preparation of good absorbent is researched through study of the following variables : steam flow rate, activated temperature, activation time. As the result of this with standard on Iodine adsorptivity, it is chosen, that steam flow rate "30 mL/hr", activation temperature "500℃", activation time "60 minutes". At the time, Iodine adsorptivity and yield shown that 228.4 mg/g, 77.23%. And also, by using nitrogen adsorption, SEM and EDS are confirmed that pore development, specific surface area, mean pore size, chemical component and content. Pore developed by steam activation is also confirmed that it is micropore.