http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전력구의 지진응답해석에 사용되는 응답진도법의 보수성 평가
임재성,김기배,전낙현,김재민,Lim, Jae-Sung,Kim, Gi-Bae,Chun, Nak-Hyun,Kim, Jae-Min 한국전산구조공학회 2021 한국전산구조공학회논문집 Vol.34 No.5
이 논문에서는 박스형 전력구의 지진응답해석에 사용되는 응답진도법의 보수성을 평가하였다. 이를 위해 25가지 전력구 단면과 각 전력구에 대한 2개의 지반조건을 고려한 총 50개 예제를 선정하였다. 응답진도법의 보수성을 평가하기 위해 동적 지반-구조물 상호작용을 고려한 정밀해석법에 의한 응답과 비교하였다. 비교결과, 정밀해석 응답에 대한 응답진도법에 의한 응답의 비로 정의한 응답비의 평균이 1.0에 근접하며, 응답비의 표준편차도 5% 이내로 매우 작아서, 응답진도법에 의한 해석이 정밀해석법과 일관됨을 알 수 있었다. 마지막으로 응답진도법에 의한 응답에 하중계수 1.1을 적용하면 전력구의 보수적인 내진설계가 가능할 것으로 나타났다. In this paper, we present the evaluation results for the conservatism of the response acceleration method (RAM), for seismic response analysis of box-type power cable tunnels. We studied 50 examples, considering the cross sections of 25 power cable tunnels, and two soil conditions for each power cable tunnel. A refined dynamic analysis method considering the soil-structure interaction was further employed to evaluate the conservatism of the RAM. The comparison revelated that the seismic responses computed using the RAM were consistent with those obtained using the refined method, since the averages of response ratio (defined as the ratio of the response by RAM to that of the refined method) approached 1.0, and the standard deviations of the response ratio were less than 5%. Finally, we found that applying a load factor of 1.1 to the response of the RAM allowed for a conservative design for seismic loads.
Miniplate를 골격성 고정원으로 사용한 심도있는 매복 하악 제2대구치의 맹출 치료: 증례보고
임재성,윤현중,이상화,Lim, Jae-Sung,Yoon, Hyun-Joong,Lee, Sang-Hwa 대한악안면성형재건외과학회 2011 Maxillofacial Plastic Reconstructive Surgery Vol.33 No.2
Tooth impaction represents the stop of eruption by clinical and radiographical disturbance in eruption path or the dislocation of tooth germ. The most common factor in tooth eruption disorders are spacial deficiency with other causes reported to be odontogenic tumors, periodontal ligament injury, etc. Impaction of the mandibular second molar is relatively rare and reported in about 3 out of 1,000 people. Because the second molars tend to erupt in a mesial direction, this situation can lead to serious problems if untreated, including dental caries, periodontal disease and root resorption of the first molar. Treatment of this problem includes, surgical repositioning and orthodontic forced eruption. Because each procedure have the definite advantages and disadvantages, and influenced by circumferential environment, these have limits for successfu1 recovery as independent treatment. In a case at St. Mary's Hospital, we performed successful correction of a horizontal impacted mandibular second molar using a miniplate skeletal anchorage system. We introduce this treatment as a valid method for an impacted second molar and consider a oromaxillofacial surgeon's role in tooth movement treatment.
시뮬레이선 방법론을 통한 Reverse Logistics의 도입 효과분석 -자동차 산업을 중심으로-
임재성,김경섭,정석재,Lim, Jae-Sung,Kim, Kyung-Sup,Jeong, Suk-Jae 한국시뮬레이션학회 2006 한국시뮬레이션학회 논문지 Vol.15 No.2
환경적인 부분에 대한 관심이 증대되면서 기업은 제품을 생산하고 판매하는 것만으로는 기업 이윤을 확보하는 데 어려움을 겪고 있다. 이에 대한 대책으로 이미 사용된 후 수명을 다한 제품과 자원(used products and materials)의 재활용에 대해 주목하게 되었고, 자원의 재활용에 대한 제도는 OECD 국가에서는 이미 보편화되어 있다. 이러한 변화에 발맞추어 자동차 산업에서도 제품의 친환경적인 측면이 강조되고 여러 관련 법규가 제정됨에 따라 상당히 큰 파장을 불러일으키고 있다. 특히 EU는 2005년부터 단계적인 폐차처리 지침을 만들고 이를 지키지 못하는 차량의 경우 더 이상 유럽 지역에 수출을 할 수 없게 하였다. 이에 따라 자동차 업계에서는 자동차의 재활용 및 부품의 재사용에 대한 연구가 활발히 진행되고 있으며, 수명이 다한 제품에 대해 리사이클링(Recycling)과 재사용(Reusing) 하여 제조 기업에게 피드백 하는 닫힌 고리(Closed loop) 형태의 회수물류(Reverse Logistics) 체계를 구축해야 하는 실정이다. 따라서 본 연구에서는 자동차 산업에서의 부품의 재사용과 재활용에 대한 Reverse Logistics 효과를 분석할 수 있는 Closed Loop 방식의 시뮬레이션 모델을 만들고 이를 통해 기존의 Supply Chain과 Reverse Supply Chain을 비교해 봄으로써 Reverse logistics의 도입에 따른 효과를 분석하고, 폐차율을 고려한 자동차 산업의 Reverse logistics의 도입 효과에 대한 분석도 수행하고자 한다. 본 연구의 결과를 통해 자동차 업계의 국내외 역물류의 도입에 따른 효과분석과 국내 폐자동차 관련 정책결정에 필요한 자료가 될 것으로 사료된다. Due to the exhaustion of resources and increasing concerns about the environment, reverse logistics has become a critical issue in recent years. We discuss the conventional logistics operations and the reverse logistics operations in the automotive industry. The traditional supply chain (TSC) and the reverse supply chain (RSC) models are developed to compare performance between two systems. In addition, results of the simulation models are discussed in respect to total costs, inventory levels and stock-outs to analyze the effects of introducing of reverse logistics system.
임재성,김진호,김현주,정진욱,이혁,박미영,채장수,Lim, Jae-Sung,Kim, Jin-Ho,Kim, Hyun-Ju,Jung, Jin-Wook,Lee, Hyouk,Park, Mi-Young,Chae, Jang-Soo 한국마이크로전자및패키징학회 2012 마이크로전자 및 패키징학회지 Vol.19 No.1
Package for artificial satellite is to produce mass production for high package with reliability certification as well as develop SDRAM (synchronous dynamic RAM) module which has such as miniaturization, mass storage, and high reliability in space environment. It requires sophisticated technology with chip stacking or package stacking in order to increase up to 4Gbits or more for mass storage with space technology. To make it better, we should secure suitable processes by doing design, manufacture, and debugging. Pin type PCB substrate was then applied to QFP-Pin type 3D memory package fabrication. These results show that the 3D memory package for artificial satellite scheme is a promising candidate for the realization of our own domestic technologies.
전력구의 지진응답해석법에 사용되는 응답변위법의 보수성 평가
임재성,양대승,황경민,김재민,Lim, Jae-Sung,Yang, Dae-Seung,Hwang, Kyeong-Min,Kim, Jae-Min 한국전산구조공학회 2021 한국전산구조공학회논문집 Vol.34 No.4
이 논문에서는 박스형 전력구의 지진응답해석에 사용되는 응답변위법(Response Displacement Method, RDM)의 보수성을 평가하였다. 이를 위하여 25가지 전력구 단면과 각 전력구에 대한 2개의 지반조건을 고려한 총 50개 예제를 선정하였다. 응답변위법에 의한 해석은 다음과 같은 세 가지 방법을 적용하였다: (1) 단일코사인방법, (2) 이중코사인방법, (3) 부지응답해석법. 그리고 이들 응답변위법의 보수성을 평가하기 위하여 지반-구조물 상호작용을 고려한 동적해석법으로 구한 응답과 비교하였다. 비교결과, 설계지진력을 결정하는 방법 중에서 부지응답해석법이 가장 변동폭이 작았으며, 이중코사인방법이 가장 보수적인 결과를 보였다. 마지막으로 이중코사인방법을 적용할 때, 응답변위법에 의한 부재력이 동적해석에 의한 값보다 클 확률이 80% 이상이 되기 위한 지반강성 보정계수 C값으로 기능수행수준에서 0.9, 붕괴방지수준에서 0.7을 추천하였다. In this study, the conservatism of the response displacement method (RDM) for the seismic response analysis of box-shaped power cable tunnels was evaluated. A total of 50 examples were used considering the cross-sections of 25 power cable tunnels and two soil conditions for each power cable tunnel. The following three methods were applied for the analysis by the RDM: (1) single cosine method, (2) double cosine method, and (3) dynamic free-field analysis method. A refined dynamic analysis method considering soil-structure interaction (SSI) was employed to compare the conservatism of the RDM. The double cosine method demonstrated the most conservative result, while the dynamic free-field analysis method yielded the least deviation. The soil stiffness reduction factor, C, for the double cosine method was recommended to be 0.9 and 0.7 for the operational performance and collapse prevention levels, respectively, to ensure a probability of at least 80% that the member force by the RDM is larger than that of dynamic SSI analysis.
임재성,강현구,김택원,문승일,임완권,Lim, Jae-Sung,Kang, Hyun-Koo,Kim, Taek-Won,Moon, Seung-Il,Lim, Wan-Khun 한국군사과학기술학회 2009 한국군사과학기술학회지 Vol.12 No.4
When assailing some area, it is important to consider targeting power system. This paper describes effective method that power networks are incapacitated based on assessing TSI and VDI. For this, we compose realistic scenario and analyze the simulation results in a view of stability. The simulation results show the destruction effects when occur the contingency in the specified area. To perform this process, the simulation tool PSS/E and DSAT are used.
하악 제3대구치 발치 시 합병증으로 발생할 수 있는 악하선과 설신경 손상: 증례보고
임재성(Jae-Sung Lim),윤현중(Hyun-Joong Yoon),이상화(Sang-Hwa Lee) 대한구강악안면외과학회 2011 대한구강악안면외과학회지 Vol.37 No.2
The extraction of an impacted third molar tooth is associated with many complications during the procedure and postoperative care. These complications include bleeding, swelling, pain, infection, as well as root fracture, proximal tooth injury, alveolar bone fracture, lingual nerve and inferior alveolar nerve injury etc. With the exception of a fractured root dislocation in the submandibular space, no direct submandibular gland injury related to extraction surgery has been reported until now. A 40 year old man visited the department of oromaxillofacial surgery at Yeouido St. Mary’s Hospital for an extraction of the right mandible third molar. A partial third molar impaction was diagnosed by a clinical and radiographic examination. A surgical tooth extraction was practiced including buccal cortical bone osteotomy. During socket curettage, an encapsulated cyst-like lesion and a verified 3 ×3 cm neoplasm in the apically lingual direction were found during process of dissection. A biopsy confirmed that the neoplasm involved the submandibular gland and nerve trunk. This unusual anatomical organ injury during the surgical tooth extraction procedure is reported as a new complication during impacted third molar extraction.