http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직접접촉식 액-빙 열교환기의 전열특성에 관한 실험적 연구
이채문(Lee Chae-Moon),박정원(Park Jung-Won),김동훈(Kim Dong-Hun) 한국태양에너지학회 1996 한국태양에너지학회 논문집 Vol.16 No.2
동적형 빙축열 시스템의 빙축열조에서 세가지 얼음충진율에 대해 분산유체의 유온, 유량을 변화시켜 용융실험을 행하였다. 빙축열조에 분산되는 분산유체의 온도가 높고 유량이 많을수록 빙축열조 내의 온도성층화 현상도 뚜렸하였고 온도성층화에 돌입하는 시간이 단축되었다. 분산유체의 유량이 많을 때는 잠열이 방출되는 시기에 걸쳐서 빙축열조 내의 온도안정화 현상이 나타나고 온도안정화에 소요되는 시간도 단축되었다. 그러나 얼음의 용융이 끝난 후는 유량이 적을 때가 온도성층화 현상이 뚜렸하였다. 빙축열조 얼음충진율이 높을 때 온도성층화에 소요되는 시간이 길었으며 빙축열조 내 온도분포는 안정되었고 빙축열조의 벽면 영향으로 인해 빙축열조 상부의 온도가 높게 나왔다. 실험초기온도를 유지하는 기간은 빙축열조 내의 얼음이 존재하는 기간과 일치하였다. 빙축열조 내의 평균온도 상승은 분산유체의 유량이 많고 온도가 높을수록 일찍 상승하였다. 총방열에너지에 대한 잠열에너지(E/E_ot)의 시간에 대한 변화비는 분산유체의 온도가 동일한 조건에서 유량이 많을수록, 분산유체의 온도가 높을수록 큰 값으로 나타났다. The operating thermal chracteristics of direct contact liquid-ice heat exchanger was experimentally investigated. In this paper, The effects of Ice Packing Factor (IPF), the inlet temperature and the flow rate of Heat Transfer Fluid (HTF) were stuided in the liquid-ice heat exchanger. Thermal stratification in liquid-ice heat exchanger was established clearly and faster at the higher inlet temperature and flow rate of HTF. At the end of melting of the lower flow rate is cleared the thermal stratification in liquid-ice heat exchanger. The temperature stnitification is long with higher value of IPF of liquid-ice heat exchanger. The mean temperature of liquid-ice storage was changed rapidly with increasing flow rate and inlet temperature of HTF. The gradiant of ratio of total energy to latent energy was found higher with increasing inlet temperature and flow rate.
이채문(Chae-Moon Lee),김석원(Seok-Won Kim),이득우(Deug-Woo Lee) 한국기계가공학회 2006 한국기계가공학회 춘추계학술대회 논문집 Vol.2006 No.-
In this paper, micro-and ultra-precision machining characteristics of single crystal copper material were studied. In order to evaluate machining characteristics of (100), (110) and (111) crystal planes, experiments were carried out with single crystal diamond tool under various cutting speed and depths of cut. The results showed that (100) crystal plane of single crystal copper gave the best machinability in respect of surface quality.
분산 시스템에서의 상호 배제를 위한 O(log₂N)알고리즘
이채문(Chae-Moon Lee),이재완(Jae-Wan Lee),황대훈(Dae-Hoon Hwang),김영찬(Young-Chan Kim) 한국정보과학회 1989 한국정보과학회 학술발표논문집 Vol.16 No.2
메세지를 이용하여 각 노드 간에 통신을 하는 컴퓨터 네트워크에 있어서 공유 자원을 사용할때 상호배제(mutual exclusion)를 구현하기 위한 알고리즘을 제안한다. 이전까지의 접근 방식은 집중형 제어 방식과 분산형 제어 방식이 연구되어져 왔으나 본 논문에서는 메세지 통신량을 줄이기 위하여 집중형과 분산형을 혼합한 제어 방식을 제안한다. 여기서 제시하는 알고리즘은 broadcast 메세지 전달 방식을 이용하여 k(log₂N)개의 메세지를 보냄으로써 상호 배제를 가능하게 한다. 여기서 N은 노드수를 나타내며 k는 3과 5 사이의 상수를 나타낸다.
이채문(Lee Chae Moon),박정원(Park Jung Won),조남철(Cho Nam Chul),박상록(Park Sang Rok),김일겸(Kim Il Gyoum),김동춘(Kim Dong Chun),김영기(Kim Young Ki),임장순(Yim Chang Soon) 한국태양에너지학회 1997 한국태양에너지학회 논문집 Vol.17 No.2
동적형(Dynamic type) 빙축열시스템의 빙축열조에서 단열조건과 비단열조건인 경우 각각 얼음충진율(Ice Packing Factor), 분산유체의 온도 및 유량의 변화에 따른 실험을 수행하였다.<br/> 실험시간이 경과함에 따라 빙축열조의 수직방향으로 온도성층화가 나타났으며 분산유체의 유입온도가 높고 유입유량이 많을수록 상부영역에서 온도분포는 크게 변화하였고 온도성층화에 도달하는 시간도 단축되었다. 또한 얼음충진율이 작은 경우가 온도성층화를 이루는 시간이 짧았고 상하부 온도차가 급격히 커진 것을 알 수 있었다.<br/> 그리고 단열의 경우가 비단열의 경우보다 모든 조건하에서 조금 높은 온도분포를 나타내었으며 온도성층화에 소요되는 시간도 조금 단축되었다.<br/> 빙축열조내의 수직방향의 평균온도 상승은 얼음충진율이 낮고 유량이 많을수록 커졌으며 총방열에너지에 대한 잠열에너지의 비(E_λ/E_tot)는 약 80%정도로 나타났다. 또한 유입온도가 높고 유량이 많을수록 잠열에너지의 방출이 빨리 나타났다. In this paper, the operating thermal characterictics of liquid-ice was expeimentally investigated in an adiabatic and a non-adiabatic direct contact liquid-ice heat exchanger. Experiments were carried out varing inlet temperature, Ice Packing Factor, and the flow rate of heat transfer fluid.<br/> The higher inlet temperature and the more much inlet flow rate, thermal stratification in liquid-ice heat exchanger was established faster.<br/> In the case of adiabatic ice storage tank, temperature distribution was a little higher at all conditions than that of non-adiabatic one.<br/> The ratio of latent energy to total discharge energy (E_λ/E_tot) was about 80%, and the discharge of latent heat energy was appeared rapidly as inlet temperature and flow rate were higher.<br/>
외부로 휜이 있는 수직이중관내의 조합대류 유동에 관한 수치적 연구
손상석,이채문,임장순,Sohn, Sang-Suk,Lee, Chae-Moon,Yim, Jang-Soon 대한설비공학회 1985 설비저널 Vol.14 No.2
The motion of a fluid in the closed annular cavity formed by two concentric vertical cylinders with externally finned tube has been analysed by a numerical solutions of the equation of momentum and energy. For the calculation procedure, the fluid is assumed to have constant thermo-dynamic and transporties except for the density, which is temperature-dependent in the buoyancy term of the vertical momentum equation (Boussinesq approximation). The govern ins equations for velocity and temperature are solved by a finite difference technique which incoorporates a scheme for treating the coupled variables. Results are presented for a range of the Rayleigh number and for various values of the fin height and the number of fins.
이덕구(Lee Deok-Gu),조행훈(Cho Haeng-Hoon),조남철(Cho Nam-Cheol),이채문(Lee Chae-Moon) 한국태양에너지학회 2009 한국태양에너지학회 학술대회논문집 Vol.2009 No.11월
The generation of electric power and plant facilities have been attempting to improve energy efficiency with many efforts as those being basis of our country's economy. In particular, the CHP(Combined Heat Power plant) system, is producing the electricity and process steam, has generally been using for the cogeneration plants. When CHP system operates, the steam has to maintain the high temperature and high pressure in order to have high efficiency of electric power production as much as possible. In addition, the exhausted steam from the turbine has to reform proper temperature to use the needed process. The major purpose of desuperheater is that the superheated steam changes into the saturated steam because it is more efficient and suitable for using the process, furthermore, it is more convenient and stable regarding the process temperature control. The design of the desuperheater obtained through the experiment and preceding analysis. This paper is verified by analysis that water spray nozzle(Φ=28㎜) shows the best ability under the real power plant condition.
공기 주축 고강성화를 위한 스러스트 베어링의 에어포켓 설계에 관한 연구
한영칠(Young chil Han),이채문(Chae moon Lee),이득우(Deug woo Lee),안대균(Dae geun An) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
This paper investigates the characteristics of stiffness and load in the thrust bearing of spindle<br/> which could be changeable according to the groove shape of inlet, in order to design a high-stiffness<br/> air bearing by selecting a optimal groove shape.<br/> In experiments, dead weight and displacement sensor are used to measure the load carrying capacity<br/> and the stiffness respectively. Various shapes and different depth of groove of self-restrictor are used<br/> as experimental conditions. Comparative study between the theoretical value and the practical one by<br/> measuring the value of stiffness and load of the thrust bearing is performed.