http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이동호,이승호,정시련,노재섭,이경순,Lee, Dong-Ho,Lee, Seung-Ho,Chung, See-Ryun,Ro, Jai-Seup,Lee, Kyong-Soon 한국생약학회 1995 생약학회지 Vol.26 No.4
Twelve phenolic components were isolated from the aqueous acetone extract of the leaf of Cornus controversa H. (Cornaceae). On the basis of chemical and spectroscopic evidence, the structures of these components were established as gallic acid, $1-O-galloyl-{\beta}-{_D}-glucose$, $1,6-di-O-galloyl-{\beta}-{_D}-glucose$, $1,2,3-tri-O-galloyl-{\beta}-{_D}-glucose$, $1,2,6-tri-O-galloyl-{\beta}-{_D}-glucose$, 3,4,6-tri-O-galloyl ${_D}-glucose$, eugeniin, gemine D, quercetin, quercitrin, hyperoside and rutin.
이동호,신영산,송진호,위재경,이정민,설재수,Lee, Dong-Ho,Shin, Young-San,Song, Jin-Ho,Wee, Jae-Kyung,Lee, Jeong-Min,Seol, Jae-Soo 한국음향학회 2012 韓國音響學會誌 Vol.31 No.5
본 논문에서는 다중 전압을 사용하는 초소형 시스템 구성 및 모듈 설계 방법론을 제시한다. 특히 잡음에 취약한 아날로그 IC의 특성을 개선하기 위한 PDN 구성 방법과 필터 구성 방법에 중점을 두어 설계하였다. 이에 제작된 모듈은 고전압에 의한 잡음을 방지하기 위해 공급 전원별로 접지면을 분할하고, 이를 공통 접지면으로 구성하기 위해 필터를 연결하였으며, via stitching 기법을 사용하였다. 이를 본 논문에서는 PDN 구조를 Lumped 모델로 구성하여 시뮬레이션을 통해 분석하고, 측정을 통해 확인하였다. 시뮬레이션 결과 4.7 uH의 Inductor를 연결하였을 때, 공통 접지면을 사용했을 때보다 -7 dB의 잡음 감소 효과를 확인할 수 있었고, 측정 결과 약 12 %가 감소하였음을 확인할 수 있었다. This paper suggest configuration method of small-size system and design method of module using multi power. In particular module designed to focus on PDN(Power Distribution Network) and filter configuration method to improve the characteristics of noise sensitive analog IC. For the prevention of high-voltage noise, manufactured module is used the ground-isolated technique and via stitching, and is connected grounds with a series of filters. In this paper, so we analyzed PDN structure through the simulation using lumped modeling and confirmed through measurement. Simulation results, when connecting 4.7uH inductor, we made certain that noise of -7dB decreases much more than when it did not. And it was confirmed 12% less than Background Noise.
상용 TiO<sub>2</sub>의 지하수 비소제거 특성에 관한 연구
이동호,김성수,Lee, Dong Ho,Kim, Sung Su 한국물환경학회 2015 한국물환경학회지 Vol.31 No.6
This study aims to evaluate arsenic adsorption efficiencies over various metal oxides (CeO<sub>2</sub>, TiO<sub>2</sub>, Fe<sub>3</sub>O<sub>4</sub>, ZrO<sub>2</sub>, AlOOH, SiO<sub>2</sub>, α-Al<sub>2</sub>O<sub>3</sub>, and γ-Al<sub>2</sub>O<sub>3</sub>) and investigate the correlation between physico-chemical characteristics of metal oxides and their efficiencies. From XPS, XRD BET analysis and isotherm adsorption test, TiO<sub>2</sub> powder showed that the best adsorption efficiency, and it's mechanism was highly depended on the chemical adsorption.
환형 캐스케이드 내 고정된 터빈 블레이드 및 슈라우드에서의 열/물질전달 특성 (II) - 끝단 필 슈라우드 -
이동호,조형희,Lee Dong-Ho,Cho Hyung Hee 대한기계학회 2005 大韓機械學會論文集B Vol.29 No.4
Experiments were conducted in a low speed stationary annular cascade to investigate local heat transfer characteristics on the tip and shroud and the effect of inlet Reynolds number on the tip and shroud heat transfer. Detailed mass transfer coefficients on the blade tip and the shroud were obtained using a naphthalene sublimation technique. The turbine test section has a single stage composed of sixteen guide vanes and blades. The chord length and the height of the tested blade are 150 mm and about 125 mm, respectively. The blade has flat tip geometry and the mean tip clearance is about $2.5{\%}$of the blade chord. The inlet flow Reynolds number based on chord length and incoming flow velocity is changed from $1.0{\times}10^{5}\;to\;2.3{\times}10^{5}.$ to investigate the effect of Reynolds number. Flow reattachment after the recirculation near the pressure side edge dominates the heat transfer on the tip surface. Shroud surface has very intricate heat/mass transfer distributions due to complex flow patterns such as acceleration, relaminarization, transition to turbulent flow and tip leakage vortex. Heat/mass transfer coefficient on the blade tip is about 1.7 times as high as that on the shroud or blade surface. Overall averaged heat/mass transfer coefficients on the tip and shroud are proportional to $Re_{c}^{0.65}\;and\;Re_{c}^{0.71},$ respectively.
이동호,권광희,이철희,송재원,박재희,Lee Dong ho,Kwon Kwang Hee,Lee Cherl hee,Song Jae Won,park Jae hee 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.10A
가변 광 감쇄기에 사용한 굽힘에 민감한 특수 광섬유 (BSF: bending-sensitive fiber)를 이용하여 굽힘에 따라 물리적인 변화를 감지해 내는 광섬유 센서(FOS: fiber-optic sensor)를 제작하였다. BSF를 이용한 FOS의 제작 가능성을 알아보기 위해 BSF의 굽힘 손실을 3차원 유한차분 빔 전파기법을 이용하여 전산모의 하였고 전산모의 결과를 실제 제작된 BSF를 이용한 FOS의 실험 결과와 비교하였다. 특히 제작된 FOS는 센서 상층부에 가해진 압력이 0 MPa에서 0.005 MPa 로 변할 때 광 에너지는 -1 dB에서 -20 dB 까지 감쇄하였다. 반면에 단일모드 광섬유(SMF: single mode fiber)를 이용하여 동일한 구조로 제작된 FOS는 광 에너지의 변화를 보이지 않았다. Fiber-optic sensor (FOS) using bending-sensitive fiber (BSF which detects physical variables according to the variation of fiber-bending is proposed. BSF is already used in variable optical attenuator. Three-dimensional finite difference beam propagation method (3D FD-BPM) is used to investigate the bending loss of BSF. Then, the results of bending experiment with FOS consisting of BSF is compared to numerical results of 3D FD-BPM. In particular, the optical power of fabricated FOS with BSF varies from -ldB to -2OdB when pressure given to the upper side of FOS changes from 0 MPa to 0.005 MPa, while the FOS consists of SMF shows no change of optical power at the same condition.
개선된 Least Square Estimation을 이용한 영상 보간 방법
이동호,나승재,Lee Dong Ho,Na Seung Je 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.10C
기존의 LSE(Least Square Estimation)를 이용한 영상보간 방법은 다른 방법들 보다 고주파 성분인 에지 부분의 보간 성능이 뛰어나고 월등한 주관적 화질의 향상을 보인다. 하지만 같은 고주파 성분인 잡음 성분의 증폭으로 인해 보간 된 일부 영상은 자연스럽지 못하는 문제점이 있다. 또한 연산량과 메모리 요구량이 상당히 높아 실시간이나 고속 구현에 어려움이 따른다. 본 논문에서 제안하는 방법은 단순한 샘플윈도우와 Direction Detector를 사용하여 보간 연산에 사용되는 참조 화소의 개수를 화질의 열화 없이 줄임으로써 연산량과 메모리 요구량을 획기적으로 줄였다. 또한 Bi-Linear 보간 방법을 선택적으로 적용함으로써 기존 방법에서 에러가 생기는 부분을 보완하였다. 컴퓨터 모의 실험 결과 기존의 LSE를 이용한 보간 방법 보다 주관적인 화질이나 객관적인 화질에서도 보다 나은 결과를 보여 주는 것을 확인하였다. Because of the high performance with the edge regions, the existing LSE(Least Square Estimation) method provides much better results than other methods. However, since it emphasizes not oがy edge components but also noise components, some part of interpolated images looks like unnatural. It also requires very high computational complexity and memory for implementation. We propose a new LSE interpolation method which requires much lower complexity and memory, but provides better performance than the existing method. To reduce the computational complexity, we propose and adopt a simple sample window and a direction detector to reduce the size of memory without blurring image. To prevent from emphasizing noise components, the hi-linear interpolation method is added in the LSE formula. The simulation results show that the proposed method provides better subjective and objective performance with love. complexity than the existing method.