http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
병영 시설물 수선유지비용 예산대비 실투입 비교에 관한 연구 - BTL사업 중심으로 -
이돈수,김광희,Lee, Don-Soo,Kim, Gwang-Hee 한국건축시공학회 2017 한국건축시공학회지 Vol.17 No.5
국방부는 노후 된 병영생활관 현대화 개선을 추진하여 고시된 75개 사업 중 60개 사업이 운영 중에 있다. 따라서 과거에는 데이터 조사 분석이 어려움이 많았으나 현재는 민간 운영사로부터 정보를 파악하고 분석할 수가 있다. 본 연구에서는 시설물의 사용성을 높이기 위하여 병영시설물의 3~5년 수선유지비의 예산과 사용 데이터를 조사 및 분석하여 문제점을 도출하여 수선유지비에 대하여 합리적인 대안을 제시하는 목적으로 하였다. 이에 맞게 이론적 고찰 및 선행 연구, 수선유지비에 대한 법적인 근거, 국방부 병영시설 BTL사업의 수선유지비 예측 비용과 사용 데이터를 분석하였다. 도출된 문제점으로는 첫째는 소모품, 없는 항목, 누락 항목에 대하여 예산을 추가로 확보하는 개선방안을 제시 하였다. 둘째는 평균으로 분할하는 지급에 대하여서는 3~5년 운영기간에는 축소하여 지급하는 개선방안과 장기수선계획 수립기준으로는 예산이 없거나 작게 지급되어 3~5년 운영기간에는 예산을 추가 또는 보완하여 지급하는 개선방안을 제시하였다. 향후 병영시설의 운영기간과 실적 데이터가 추가로 확보가 가능한 시점에 수선유지비 효율적 연구는 보완되어야 한다. 본 연구는 향후 국방부 병영시설 건설에 대하여 사업비를 합리적으로 유도하는데 기여할 수 있을 것이다. With the barracks modernization project, the Ministry of National Defense has been operating 60 projects of the 75 that have been announced. It was difficult to investigate and analyze the data in the past because data could not be obtained while it was much easier to do that since data can be obtained from private companies. With the aim of increasing the usability of the facilities, the objective of this study is to present a reasonable alternative for repair and maintenance costs by investigating and analyzing the budget and the actual expenses of repair and maintenance of military facilities for the past 3 to 5 years, and then identifying the problems with these. To accomplish this, a theoretical review of previous studies and legal grounds related to repair and maintenance costs was performed, and data on the estimates and the actual expenses data used in BTL projects carried out by private companies were analyzed. First, one of the problems was that there are some items omitted, including consumables, and these items should be included in order to secure their budget. Second, in terms of the items for divided payments, two improvements had been presented: a short-term payment plan for the operation period of 3 to 5 years and a long-term payment plan for an additional and complemented period other than the operation period. The repair and maintenance costs should be further studied at the point of time in a future when the actual data on the costs and operation period of military facilities can be secured. This study is expected to serve as empirical data that will form the basis for a reasonable calculation of the construction cost for military facilities.
3D스캐닝을 이용한 건설공사 스마트 품질점검 방안에 관한 연구
이돈수,김광희,Lee, Don-Soo,Kim, Gwang-Hee 한국건축시공학회 2020 한국건축시공학회지 Vol.20 No.2
건설산업에도 스마트 건설기술들이 많이 도입되고 있으며, 여러 기술 중 3D 스캐닝과 BIM을 이용한 품질관리를 시도하는 회사가 증가하고 있다. 따라서 본 연구에서 3D 스캐닝과 BIM을 현장 품질점검 사례에 적용하여 활용가능성과 효용성을 확인하였다. 그 결과 3D 스캐닝과 BIM을 활용한 품질점검은 기존에 시행했던 품질점검보다 시간적으로 단축되고 적은 인력으로도 실현이 가능하다는 것을 확인하였다. 따라서 품질점검의 다양한 분야에 3D 스캐닝과 BIM을 활용한 기술을 적용할 수 있을 것으로 사료된다. The several smart construction technologies are being introduced to the construction industry, and among these technologies, a few companies are attempting quality control using 3D scanning and BIM. Therefore, in this study, 3D scanning and BIM were applied to cases of on-site quality inspection to confirm the applicability and utility. As a result, it was confirmed that the quality inspection using 3D scanning and BIM was shorter in time than the previously performed quality inspection and can be realized with less manpower. Therefore, it is considered that 3D scanning and BIM-enabled technologies can be applied to various items of quality inspection.
얼굴 표정의 자동 인식을 통한 PDA 상에서의 3차원 얼굴 애니메이션
이돈수,최수미,김해광,김용국,Lee Don-Soo,Choi Soo-Mi,Kim Hae-Hwang,Kim Yong-Guk 한국정보처리학회 2005 정보처리학회논문지B Vol.12 No.7
본 논문에서는 일곱 가지의 기본적인 감정 정보를 자동으로 파악하고 얼굴을 PDA 상에서 렌더링할 수 있는 얼굴 표정의 인식 및 합성 시스템을 제시한다. 얼굴 표정 인식을 위해서 먼저 카메라로부터 획득한 영상으로부터 얼굴 부분을 검출한다. 그리고 나서 기하학적 또는 조명으로 인한 보정을 위해 정규화 과정을 거친다. 얼굴 표정을 분류하기 위해서는 Gabor wavelets 방법을 enhanced Fisher 모델과 결합하여 사용할 때가 가장 좋은 결과를 보였다. 본 표정 분류에서는 일곱 가지 감정 가중치가 결과로 제시되고, 그러한 가중 정보는 모바일 네트웍을 통하여PDA 상으로 전송되어 얼굴 표정 애니메이션에 이용되어진다. 또한 본 논문에서는 고유한 얼굴 캐릭터를 가진 3차워 아바타를 생성하기 위하여 카툰 쉐이딩 기법을 채택하였다. 실험 결과 감정 곡선을 이용한 얼굴 표정 애니메이션은 선형 보간법 보다 감정 변화의 타이밍을 표현하는데 더 효과적인 것으로 나타났다. In this paper, we present a facial expression recognition-synthesis system that recognizes 7 basic emotion information automatically and renders face with non-photorelistic style in PDA For the recognition of the facial expressions, first we need to detect the face area within the image acquired from the camera. Then, a normalization procedure is applied to it for geometrical and illumination corrections. To classify a facial expression, we have found that when Gabor wavelets is combined with enhanced Fisher model the best result comes out. In our case, the out put is the 7 emotional weighting. Such weighting information transmitted to the PDA via a mobile network, is used for non-photorealistic facial expression animation. To render a 3-D avatar which has unique facial character, we adopted the cartoon-like shading method. We found that facial expression animation using emotional curves is more effective in expressing the timing of an expression comparing to the linear interpolation method.
이돈수(Don-Soo Lee),최수미(Soo-Mi Choi) 한국정보과학회 2003 한국정보과학회 학술발표논문집 Vol.30 No.2Ⅱ
임상 및 실험 결과를 대외적으로 공인 받기 위해서는 통계적 검정 절차를 거치는 것이 일반적이다. 하지만 통계적 전문 지식이 부족한 사용자가 통계 소프트웨어를 배우는 데는 시간이 많이 걸리며, 결과 해석에도 어려움이 많은 실정이다. 데이터의 특성과 성질에 맞추어 통계법이 선택되어야 하는데, 통계지식이 부족한 초보자들은 가장 일반적인 분석법을 적용시키곤 한다. 이와 같은 방식의 통계분석은 잘못된 결과로 이어질 수 있기 때문에 올바른 분석법을 가이드 해주는 기능이 필요하다. 또한 통계분석법의 적합성을 평가하는데 있어 오차와 잔차의 동분산성 가정이 유용하게 쓰여질 수 있다. 본 연구에서는 사용자에게 올바른 분석법을 제시하는 비쥬얼 가이드 인터페이스와 잔차를 3D Glyph를 이용하여 보여주는 불확실성 시각화 방법을 사용하였다. 분석법 적용에서 나타나는 불확실한 데이터의 시각화는 의사결정에 도움을 줄 수 있다.
김주용 ( Kim Ju-yong ),박지영 ( Park Ji-yeong ),이돈수 ( Lee Don-soo ),이영도 ( Lee Young-do ),김광희 ( Kim Gwang-hee ) 한국건축시공학회 2020 한국건축시공학회 학술발표대회 논문집 Vol.20 No.1
The 3D scanning technology is being introduced for quality inspection of building construction. Therefore, this study tried to confirm whether it is possible to check the quality of rebar by using 3D scanning. After rebar placed on the formwork slab was scanned with a 3D scanner, the rebar spacing was confirmed by overlapping with the CAD drawing. As a result, the 3D scanner was able to check the quality of rebar work on one floor at a time. Therefore, 3D scanning could be used for quality inspection of rebar works such as columns, beam and girders, walls, and slabs in the future.