http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이단비(Dan-Bi Lee),정석권(Seok-Kwon Jeong),정영미(Young-Mi Jung) 대한설비공학회 2014 설비공학 논문집 Vol.26 No.12
This paper deals with precise analytical state equation modeling of a variable speed refrigeration system (VSRS) for optimum control in state space. The VSRS is described as multi-input and multi-output (MIMO) system, which has two controlled variables and two control inputs. First, the Navier-Stokes equation and mass flow rate were applied to each component of the basic refrigeration cycle to build a dynamic model. The dynamic model, represented by a differential equation, was transformed into the state equation formula. Next, a full-order state observer was built to estimate all of the state variables to compose an optimum control system. Then, an optimum controller was designed to minimize an evaluation function that has input energy and control error. Finally, simulations and experiments were conducted to verify the validity of the proposed modeling and designed optimum controller to regulate target temperature and superheat in a 1RT oil cooler system. The results show that the proposed method, state equation modeling and optimum control, is efficient to ensure optimal control performance of the VSRS.
1-Methylcyclopropene와 Aminoethoxyvinylglycine의 수체처리에 의한 복숭아 Ethylene 발생 감소 및 보구력 향상
이단비(Dan Bi Lee),이국진(Guk Jin Lee),이주형(Ju Hyeong Lee),권순은(Soon Eu Kwon),안순영(Soon Young Ahn),김승희(Seung Heui Kim),김성종(Sung Jong Kim),강인규(In Kyu Kang),최성진(Seong Jin Choi),윤해근(Hae Keun Yun) 한국원예학회 2017 한국원예학회 학술발표요지 Vol.2017 No.10
수확 전 수관 하부 반사필름 처리에 의한 복숭아 과실의 착색 및 관련 유전자의 발현 촉진
이단비(Dan Bi Lee),이국진(Gook Jin Lee),유영준(Young Jun You),안순영(Soon Young Ahn),윤해근(Hae Keun Yun) 한국원예학회 2021 원예과학기술지 Vol.39 No.3
복숭아의 외관은 과실의 품질을 결정하는데 중요한 요인이다. 반사필름에 의한 복숭아 과피의 착색 촉진 효과를 구명하기 위하여, 복숭아(Prunus persica, 품종: Taiko) 과실을 수확 7일전에 과원의 수관 하부에 반사필름을 피복한 후, 수확한 과실의 착색, 가용성 고형물 함량(SSC), 적정산도(TA), 경도(N), 과실의 성숙 및 착색과 관련된 유전자의 발현량을 조사하였다. 반사필름이 처리된 수관 내부의 광투과량(광합성유효방사)이 증가하고, Hunter a값이 현저하게 상승되었다. 반사필름이 처리된 과실의 가용성 고형물 함량, 적정산도 및 경도에는 큰 변화가 없었다. 반사필름을 처리한 과실에서 안토시아닌 생합성과 관련된 유전자(CHS 및 F3H)의 발현은 유도되었으나, 에틸렌 합성에 관여하는 유전자(ACO 및 ERS1) 및 세포벽 연화에 연관된 유전자(PL 및 PME)의 발현은 증가하지 않았다. 이러한 결과는 복숭아 수체 하부의 반사필름 멀칭으로 수관 내부의 광환경을 개선하여 복숭아 과피에서 색소합성 관련 유전자의 발현을 유도하여 착색이 촉진되었음을 의미하는 것이다. Fruit appearance is the most important factor of fruit quality in peach (Prunus persica). In order to determine the promotional effects of increased light in the canopy on peach fruit coloration, reflective film was applied under trees in the field 7 days before the harvest of ‘Taiko’ peach. We then investigated pigmentation of the peel, fruit traits like total soluble solids, titratable acidity, and hardness; the expression of genes related to fruit coloration and ripening in a peach fruits; and photosynthetically active radiation (PAR) inside the tree canopy treated with reflective film mulching. The color of fruit skins treated with reflective film mulching was improved significantly according to their Hunter value compared to untreated fruit. There was no significant change in total soluble solids, acid content, and hardness in fruits treated with reflective film mulching compared to control. Quantitative real-time PCR analysis revealed that transcript levels of anthocyanin biosynthetic related genes (F3H and CHS) were up-regulated; however, the expression of ethylene synthesis-related genes (ACO and ERS1) and ripening-related genes (PL and PME) was not enhanced by reflective film mulching. These results suggest that reflective film mulching improved light irradiance in the tree canopy, which promoted fruit skin coloration via the the induction of anthocyanin biosynthesis in the peel of peach.
감정 일기를 통한 6가지 감정 분류 : LSTM모델 연구
이단비 ( Dan-bi Lee ),김가영 ( Ga-yeong Kim ),윤예진 ( Ye-jin Yoon ),이지은 ( Ji-eun Lee ) 한국정보처리학회 2023 한국정보처리학회 학술대회논문집 Vol.30 No.2
이 연구는 사람의 감정 변화를 건강하게 파악하고 분석하기 위해 시작되었다. Natural Language Processing(NLP)는 컴퓨터가 인간의 언어를 이해하기 위해 개발된 자연어 처리 기술이다. 본 논문에서는 이 기술을 이용하여 Text Mining을 통해 사용자가 작성한 일기에 담긴 감정을 분석하고 LSTM 모델과 GRU 모델을 비교군으로 두어 두 모델 중 감정 분석에 더 적합한 모델을 찾는 과정을 거쳤다. 이 과정을 정확도가 더 높은 LSTM 모델을 사용하여 감정 분석 결과를 분류하였다.
다수 개 빼기 성형에서 일반사출성형과 사출압축성형의 성형특성 비교
이단비(Dan Bi Lee),남윤효(Yun Hyo Nam),류민영(Min Young Lyu) 한국고분자학회 2014 폴리머 Vol.38 No.2
일반사출성형은 공정 중 보압단계에서 캐비티에 높은 압력이 작용하여 성형품에 큰 잔류응력이 남게 된다. 또한 캐비티 내 위치 별로 압력분포가 달라 균일한 물성의 제품을 얻는데 한계가 있다. 다수 개 빼기 일반사출성형에서는 캐비티간 충전 불균형이 일어나 캐비티간 품질의 편차를 일으킨다. 이와 같은 한계를 극복하기 위해 사출압축성형 공정을 사용하는 경우가 많다. 본 연구에서는 다수개 캐비티를 갖는 금형을 이용하여 일반사출성형과 사출압축성형을 비교 분석하였다. 실험과 해석을 통하여 연구를 수행하였으며 투명한 수지인 PC와 PS를 이용하여 시편에 나타나는 복굴절을 관찰하여 일반사출성형과 사출압축성형에서 나타나는 성형특성을 비교하였다. 연구결과, 사출압축성형으로 제작된 시편에서 캐비티 내의 압력이 균일하여 복굴절과 성형수축률이 낮고 균일하게 나타났다. 그리고 일반사출성형에서 나타나는 캐비티간 충전 불균형에 의한 캐비티간 물성의 편차가 사출압축성형에서는 크게 줄어들었다. 본 연구를 통하여 사출압축성형은 다수 개 빼기 사출성형에서 캐비티 내 균일한 물성확보뿐만 아니라 캐비티간 품질 불균형을 해소하는데 유용함을 확인할 수 있었다. Large residual stresses are remained in the conventional injection molded products because of the high cavity pressure in packing phase during injection molding process. Conventional injection molding (CIM) invokes distribution of cavity pressure and it has a limitation to obtain product with uniform physical property. Multi-cavity conventional injection molding contains quality deviation among the cavities since flow imbalance℃curs during filling phase. Injec-tion compression molding (ICM) is adopted to overcome these limitations of CIM. In this study, molding characteristics of CIM and ICM have been investigated using multi-cavity injection mold. Researches were performed by both exper-iment and computer simulation through observations of birefringence for transparent resins, polycarbonate and poly-styrene in CIM and ICM. As a result, low and uniform birefringence and mold shrinkage were showed in the specimens by ICM that could give a uniform cavity pressure. Deviation of physical property among the specimens in multi-cavity mold shown in CIM was significantly reduced in the specimens by ICM. Through this study it was concluded that the ICM in multi-cavity molding was valid for molding products with uniform property in an individual cavity and also reduced property deviation among the cavities.