RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재후보

        가정용 가스보일러 순환펌프의 에너지 효율지수 시험방법 및 장비개발에 대한 표준화 연구

        오석호,박원식,김지수 표준인증안전학회 2019 표준인증안전학회지 Vol.9 No.3

        Europe has tightened the energy efficiency regulations for electrical equipment since 2014, so that equipment that does not meet the energy efficiency standards is no longer marketed. It also mandates the energy efficiency labeling program so that electrical equipment manufacturers provide consumers with information on energy consumption. In the case of domestic gas boiler circulation pumps, the standard of the Energy Efficiency Index (EEI) test procedure was establish in 2012, and the EEI was applied in 2013. Since 2015, it is mandatory to use high efficiency circulation pumps that satisfy the energy efficiency index below 0.23, and from 2020, the parts replaced by boilers cannot be used if the energy efficiency index does not meet below 0.23. Most of the pumps used in the domestic market don’t meet the EEI value, so it is necessary to prepare countermeasures. Therefore, in this study, introduced the research process that domestic boiler manufacturers to enter the European market(about 8.2 million units), which is the world’s largest market, we made a test device and a measurement program that were uniquely manufactured based on EN standards. Through in this research, boiler manufacturers and parts manufacturers preparing for export to Europe will try to improve their understanding of standards and test equipment. 유럽은 2014년부터 전기기기 에너지 효율규제를 강화하여 에너지효율 기준에 미치지 못하는 기기에 더 이상 시장 유통에서 제외하도록 하였으며, 또한 에너지효율 등급 표기를 의무화하여 전기기기 제조업체가 소비자에게 에너지 소비 관련 정보를 제공하도록 하고 있다. 가정용 가스보일러 순환펌프의 경우 2012년에 에너지 효율지수(EEI) 시험절차의 표준을 제정하였고, 2013년부터 EEI를 적용하여, 2015년부터 에너지효율지수가 0.23 이하를 만족하는 고효율 순환펌프 사용을 의무화 하고 있으며, 2020년부터는 보일러 교체되는 부품이 에너지효율지수가 0.23이하 만족하지 못할 경우 사용할 수가 없게 된다. 국내 시장에서 사용되는 대부분의 펌프의 경우 이 부분에 부합되지 않아 대응책 마련이 필요한 상황이다. 따라서 본 연구에서는 국내 보일러 제조사가 세계 최대시장인 유럽시장(약 820만대)을 진입하기 위하여 해외표준 기반으로 자체 제작한 시험장비 및 측정프로그램을 구축한 연구과정을 소개하여, 유럽 수출을 준비하는 보일러 제조사 및 부품 제조사에서 본 연구를 통해 표준과 시험장비의 이해도를 높이는데 도움이 되고자 한다.

      • KCI등재후보

        발전기 내장 가스열펌프 연간성능시험 방법에 대한 표준화 연구

        오석호,김효엽,김지수,박원식,김성민 표준인증안전학회 2018 표준인증안전학회지 Vol.8 No.2

        In order to preoccupy the green energy market, the governments of each country are expanding to foster green energy industry and develop technology. Korea is expected to reduce domestic greenhouse gas by 37% compared to 851 million tonnes and to reduce power demand equivalent to nine nuclear power plants by 2030. In this situation, the center of energy policy is shifting toward environmental and safety considerations. The gas-driven heat pump industry is expected to play an important role. The gas-driven heat pump is a cooling/heating device that produces electricity and cooling or heating simultaneously by driving a compressor and a generator in a gas engine. The US and Japan occupy the entire world market. Performance test methods for this product are also being followed by JIS and JRA in Japan, AHRI and ASHRAE in the USA. The present study shows the domestic and foreign standardization status and activity on gas- driven heat pump with generator, and suggests the annual performance test method suitable for Korea. 전 세계는 그린에너지 시장을 선점하기 위하여 그린에너지산업의 육성과 기술개발을 위한 각국 정부의 지원이 확대되고 있는 상황이다. 우리나라는 2030년까지 국내 온실가스 851백만톤 대비 37% 감축, 원자력발전소 9기에 해당하는 전력수요 감축 등 에너지정책 무게중심이 환경과 안전을 고려하는 방향으로 전환되고 있는 상황에 가스를 이용하는 열펌프 산업이 중요한 역할을 담당할 것으로 보인다. 가스열펌프는 가스엔진에 압축기 및 발전기를 구동하여 전기와 냉방 또는 난방을 동시에 생산하는 냉난방기기로서 미국, 일본이 전 세계시장을 점령하고 있다. 가스열펌프에 대한 성능시험 방법 역시 일본의 JIS, JRA 그리고 미국의 AHRI, ASHRAE가 대표적이며 세계적으로 따르고 있는 추세이다. 따라서 본 연구는 발전기 내장 가스열펌프 연간성능시험 방법에 대한 국내외 표준화 현황과 활동에 대해서 조사하고, 우리나라에 적합한 성능시험 방법을 제안한다.

      • IEEE 802.15.4 MAC/PHY를 이용한 TDMA 기반 Superframe 네트워크 구현

        오석호 ( Sukho¸ Oh ),김강묘 ( Kang-myo Kim ),정하연 ( Hayeon Jung ),김기형 ( Ki-hyung Kim ),유승화 ( Seung-wha Yoo ) 한국정보처리학회 2011 한국정보처리학회 학술대회논문집 Vol.18 No.1

        산업장 기반 모니터링 시스템에 무선 네트워크 기술의 도입은 시스템 도입 및 유지보수에 있어 반드시 필요하다. 무선 네트워크 기반의 산업장 모니터링을 위해 현재 USN 네트워크에서 광범위하게 사용되고 있는 IEEE 802.15.4 하드웨어 및 MAC 을 이용하여 Freequency Hopping을 수행하는 Superframe 기반의 TDMA 기술을 구현하였다.

      • KCI등재

        계단 응답 모델의 보간을 이용한 화력발전 보일러-터빈 시스템의 동역학 행렬제어(DMC)에 관한 연구

        오석호(Seok-Ho Oh),문운철(Un-Chul Moon) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.6

        동역학 행렬제어(Dynamic Matrix Control) 기법은 각종 산업 현장에서 가장 활발하게 적용되고 있는 고급 제어 기법으로, 최근에는 공정제어의 표준 기법으로 인식되고 있다. 동역학 행렬제어에서는 대상 플랜트의 거동을 묘사하기 위하여 계단 응답 모델(Step Response Model)을 이용한다. 한편 화력발전의 보일러-터빈시스템은 심한 비선형성과 넓은 운전영역으로 인하여 기존의 선형제어기법으로 제어하기에는 그 성능의 한계가 있게 된다. 본 논문에서는 미리 선정된 동작점에서 계단 응답 모델을 개발한 후, 이를 통한 실시간 보간(Interpolation)을 통하여 계단응답 모델을 실시간으로 개선하는 동역학 행렬제어 기법을 제시한다. 제시된 제어 기법은 화력발전의 보일러-터빈 시스템에 적용하여 만족할 만한 제어 성능을 확인하였다. This paper proposes an adaptive Dynamic Matrix Control (DMC) and its application to boiler-turbine system In a conventional DMC, object system is described as a Step Response Model (SRM). However, a nonlinear system is not effectively described as a single SRM. In this paper, nine SRMs at various operating points are prepared. On-line interpolation is performed at every sampling step to find the suitable SRM. Therefore, the proposed adaptive DMC can consider the nonlinearity of boiler-turbine system. The simulation results show satisfactory results with a wide range operation of the boiler-turbine system.

      • KCI등재

        건물용 열병합발전 시스템 성능시험 방법에 대한 표준화 연구

        오석호(Seokho Oh),김효엽(Hyoyeop Kim),박원식(Wonsik Park),김성민(Sungmin Kim) 표준인증안전학회 2017 표준인증안전학회지 Vol.7 No.2

        전기와 열을 자급자족 할 수 있어 큰 호응을 받고 있는 초소형 열병합발전 시스템은 폐열을 회수하는 동시에 발전을 통해 전기를 생산하는 소형 분산 에너지 생성 시스템으로 가정용과 건물용으로 구분할 수 있으며 이들의 구분은 전기출력이 3 kW 이하 일 때 가정용, 3 kW 초과 일 때 건물용으로 구분한다. 현재 건물용 열병합발전 시스템은 학교, 병원, 백화점 등에서 설치되어 있으며 국내 설치된 대부분 제품은 일본에서 수입되고 있고, 최근에는 국내기업에서 제품을 개발하여 판매하고 있는 상황이다. 이와 관련된 성능시험 방법에 대한 표준은 유럽의 EN 50465와 일본의 JIS B 8122 가 대표적이며 국내 표준은 없는 실정이다. 따라서 본 연구는 건물용 열병합발전 시스템에 대한 국내외 표준화 현황과활동에 대해서 조사하고, 우리나라에 적합한 성능시험 방법을 제안한다. Micro combined heat and power, which allows direct supply of electricity and heat and thus draws great attention, is a small scale distributed energy generation system capable of recovering waste heat and generating electricity at the same time. Combined heat and power was imported from Japan. Recently, a Korean company has developed for buildings has been installed in schools, hospitals, department stores, etc., most of which used in Korea and sold combined heat and power. Representative standards for performance test methods related thereto are European Standard EN 50465 and Japanese Standard JIS B 8122, but no national standard exists. The present study shows the domestic and foreign standardization status and activity on combined heat and power for buildings, and suggests the performance test method suitable for Korea.

      • KCI등재

        EN 13203-2에 기초한 가정용 가스보일러 온수성능에 대한 에너지 소비량 평가방법

        오석호(Oh, Seokho),송기종(Song, kijong),강재철(Kang, Jaecheol),강영각(Kang, yeonggak) 표준인증안전학회 2020 표준인증안전학회지 Vol.10 No.3

        최근 선진국에서는 과거의 효율등급제도 개선을 위하여 노력하고 있으며 영국, 독일, 네덜란드, 이탈리아를 포함한 유럽연합(EU)의 경우, 2005년을 기점으로 해서 지구 온난화 대책 및 에너지 사용기기의 고효율화와 친환경성을 강화시키기 위하여 Eco-design Directive와 같은 제도를 적극 추진하였다. 그 중에서도 가정용 가스보일러를 최우선 품목으로 지정하여 2007년에 Eco-design of Boiler를 발표, 2011년에 강제 적용된 “Eco-design Directive” 발표, 2015년 “ErP 2015 Directive” 발표에 따라 난방효율 및 온수 효율이 낮은 제품은 시장진입을 금지하였으며, 온수량, 온수조절능력, 온수사용량에 따른 온도변화 등의 요건을 관련 표준에서 정하고 있다. 본 연구는 가정용 가스보일러의 에너지 효율을 향상시키기 위하여 다양한 사용조건에 따른 온수공급성능 시험을진행하였으며, 시험에 필요한 온수에 대한 일일 공급 프로그램은 EN 13203-2에 따라 가정의 주방과 욕실에서사용되는 온수로 정의하였다. 유럽에서는 온수 에너지효율을 38% 이상(일반 가정용 보일러 용량, XL)이 되어야설치가 가능하며, 이 값을 만족하지 못할 경우 사용할 수 없게 된다. 따라서 유럽의 난방 및 온수 효율 기준을강화하려는 움직임에 따라 국내 제품의 품질 경쟁력을 확보하고 제조사의 유럽 지역 수출을 활성화하기 위하여자체 제작한 시험 장치를 이용하여 시험과정을 소개하였다. Recently, developed countries are making efforts to improve the former efficiency rating system. In the case of the European Union (EU) including the UK, Germany, the Netherlands, and Italy, starting in 2005, systems such as the Eco-design Directive have been actively promoted in order to reinforce global warming measures, high efficiency and eco-friendliness of energy-using devices. In this situation, according to the announcement of the Eco-design of Boiler in 2007, the “Eco-design Directive” enforced in 2011, and the “ErP 2015 Directive” in 2015, with the announcement of the Eco-design of Boiler in 2007 by designating the gas boiler as the top priority. Products with low heating efficiency and hot water efficiency were prohibited from entering the market, and requirements such as hot water quantity, hot water control capacity, and temperature change according to hot water consumption, etc were set in the relevant standards. This study conducted a hot water supply performance test according to various usage conditions to improve the energy efficiency of a household gas boiler. The daily supply program for hot water required for the test was defined as hot water used in home kitchens and bathrooms according to EN 13203-2. In Europe, hot water energy efficiency must be above 38%(General household gas boiler capacity, XL) to be installed, and if this value is not satisfied, it cannot be used. Therefore, in accordance with the movement to strengthen European heating and hot water efficiency standards, the test process was introduced using self-produced test equipment in order to secure the quality competitiveness of domestic products and promote exports of manufacturers to Europe.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼