http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안치형,최원준,박천웅,이승영,김영도,Ahn, Chi Hyeong,Choi, Won June,Park, Chun Woong,Lee, Seung Yeong,Kim, Young Do 한국재료학회 2018 한국재료학회지 Vol.28 No.3
Molybdenum (Mo) is one of the representative refractory metals for its high melting point, superior thermal conductivity, low density and low thermal expansion coefficient. However, due to its high melting point, it is necessary for Mo products to be fabricated at a high sintering temperature of over $1800-2000^{\circ}C$. Because this process is expensive and inefficient, studies to improve sintering property of Mo have been researched actively. In this study, we fabricated Mo nanopowders to lower the sintering temperature of Mo and tried to consolidate the Mo nanopowders through ultra high pressure compaction. We first fabricated Mo nanopowders by a mechano-chemical process to increase the specific surface area of the Mo powders. This process includes a high-energy ball milling step and a reduction step in a hydrogen atmosphere. We compacted the Mo nanopowders with ultra high pressure by magnetic pulsed compaction (MPC) before pressureless sintering. Through this process, we were able to improve the green density of the Mo compacts by more than 20 % and fabricate a high density Mo sintered body with more than a 95 % sintered density at relatively low temperature.
안치형,안태기,이동진,황종규,김재희 한국철도학회 2022 한국철도학회논문집 Vol.25 No.9
This paper presents the characteristics of smart block antennas designed for user location detection in smart block areas. When a user passes through a specific smart block, the appropriateness of the antenna characteristics is determined by calculating the difference between RSSIs generated from the corresponding block and the adjacent block. In this paper, a simulation environment was modeled for an actual subway station. The radio wave intensity in the station was analyzed by applying the designed antennas to the simulation environment. 2×2 and 4×4 array antennas operating at a frequency of 2.45 GHz obtained beam widths of 54° and 24°, respectively, and RSSI differences of 0.38 dB and 0.65 dB, respectively. It was confirmed that it is difficult to recognize the position of the desired signal because of the small RSSI difference. When an 8×8 array antenna with beam width of 12° or less was used as smart block, the difference in radio wave reception intensity was calculated and found to be 7.68 dB, which means that the radio wave intensity of the smart block passed by the user was about 5.8 times greater than that of the adjacent block. As a result, it will be possible to detect the position of the designed signal when the minimum beam width is 12° or less.
IoT 기반 스마트 스테이션을 위한 철도 역사 내 위치추정 방법
김진평,안치형 한국철도학회 2020 한국철도학회논문집 Vol.23 No.10
본 논문에서는 향후 스마트스테이션 역사내 IoT (Internet of Things) 센서를 이용하여 특정 서비스 지역을 감지하는 위치 추정 방법을 제시하였다. IoT 센서로 사용된 BLE (Bluetooth Low Energy) 비콘의 수신신호강도 값으로부터 IoT 서비스의 시설에 따른 가상 영역을 분할하였다. 실제 지하철 역사 내에 구성된 여러 IoT 센서에서 수신 된 수신 신호강도 값들은 다층 퍼셉트론 알고리즘을 이용하여 할당 된 영역을 인식하게 된다. 제안 된 방법의 검증을 위해 실제 지하철 역사 환경에서 실험을 수행 하였다. 실제 지하철 역사 내 2 개의 분할 구역을 인식하기 위하여 10 개의 센서가 서로 다른 전송 전력 레벨로 사용되었다. 결과적으로 약 78.1%의 영역 인식 정확도를 확인 하였다. 제안된 서비스 영역 (Zone) 기반의 이용객 위치측위 방법이 향후 스마트스테이션에서 이용객 중심의 실시간 IoT 서비스 활성화에 기여할 것으로 기대된다.
편파 다이버시티를 위한 바람개비 형태의 루프 안테나 설계
김두수,안치형,임윤택,이성준,이광천,박위상,Kim, Doo-Soo,Ahn, Chi-Hyung,Im, Yun-Taek,Lee, Sung-Jun,Lee, Kwang-Chun,Park, Wee-Sang 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.1
본 논문에서는 편파 다이버시티를 구현하기 위한 바람개비 형태의 루프 안테나를 제안하였다. 제안된 루프 안테나의 원주는 일반적인 소형 루프 안테나의 길이(${\lambda}$)보다 10배가 크나, 소형 루프 안테나와 같이 수평면에서 무지향성 패턴을 얻을 수 있다. 기생 루프 안테나의 사용을 통해 안테나의 임피던스 정합 문제를 해결하고, 등가 회로를 제시하여 제안된 안테나의 설계 의도가 수식적으로 설명될 수 있음을 보였다. 제안된 안테나는 2.6 GHz에서 설계, 제작되었으며 정재파비 2:1 이하를 기준으로 6 %의 대역폭, 편파 분리도 15 dB, 이득 1.5 dBi의 시뮬레이션 결과를 나타내었고, 시뮬레이션 결과와 측정 결과가 잘 일치하였다. A windmill-shaped loop antenna is designed for polarization diversity. Its circumference is almost 10 times that of a conventional small loop antenna whose circumference is less than ${\lambda}/10$ but its the radiation pattern is omni-directional. An identical parasitic element is placed over the radiator to match the antenna input impedance. An equivalent transmission line and RLC circuit models are shown to fully describe for the windmill-shaped loop antenna. The proposed antenna has a bandwidth of 6 % with input VSWR less than 2:1 and a polarization purity of 15 dB at 2.6 GHz, and the gain of 1.5 dBi. The simulated and measured results show fairly good agreement.