http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RPA의 지각된 특성이 수용의도에 미치는 영향에 대한 연구
송선정 ( Song Sun Jung ),이형용 ( Lee Hyoung-yong ) 한국지식경영학회 2021 지식경영연구 Vol.22 No.4
기업이 현존하는 다양한 비즈니스와 IT 프로세스 개선을 위해서 많은 시간과 비용을 들이지 않고도, 선제적으로 4차산업 혁명에 대응하기 위해 최근 각광받고 있는 것이 RPA(Robotic Process Automation) 기술이다. 본 연구에서는 RPA의 사용의도에 영향을 미치는 변인들을 긍정적인 요인 세 가지와 부정적인 요인 세 가지로 대표성 있게 식별하고, 이러한 변인들이 실제 RPA 수용의도에 미치는 영향의 인과관계를 살펴보았다. 일반 사무근로자를 대상으로 이메일 설문조사를 실시한 후, SPSS 27.0와 SmartPLS 3.3.5를 이용하여서 구조방정식 분석을 수행하였다. 보안성, 정확성, 효율성으로 이루어진 긍정적 지각과 고용불안, 실행오류, 도입실패염려로 이루어진 부정적 지각이 2차 요인으로 구성되었으며, 지각된 유용성과 지각된 용이성을 매개로 긍정적 지각이 RPA 사용의도에 영향을 미쳤으며, 부정적 지각이 수용갈등을 매개로 RPA 사용의도에 영향을 미치는 것을 확인하였다. 또한, RPA 사용 경험의 유무가 지각된 용이성과 상호작용하여서 RPA 사용의도에 조절효과를 미치는 것을 확인하였다. RPA를 사용하려는 기업의 입장에서 어떤 요인이 중요한지 인식하고 대응할 수 있도록 한 점에서 지식경영관점의 실무적이며 이론적인 의의가 있다고 할 수 있다. RPA (Robotic Process Automation) technology has recently been spotlighted to preemptively respond to the 4th industrial revolution without spending a lot of time and money to improve various existing business and IT processes. In this study, variables affecting intention to use RPA technology were representatively identified into three positive factors and three negative factors, and the causal relationship between the effects of these variables on actual RPA acceptance intention was examined. After conducting an email survey for general office workers, structural equation analysis (SEM) was performed using SPSS 27.0 and SmartPLS 3.3.5. The second order factor of a positive perception consisting of security, accuracy, and efficiency, and the second order factor of a negative perception consisting of job security, execution error, and fear of introduction failure. The positive perception affected the intention to use RPA through perceived usefulness and perceived ease. It was confirmed that the negative perception has a mediating effect on the intention to use RPA through acceptance conflict. In addition, it was confirmed that the presence or absence of experience in using RPA interacts with perceived ease and has a moderating effect on intention to use RPA. It can be said that there is practical and theoretical implications from the point of view of knowledge management in that it allows companies to recognize and respond to which factors are important from the point of view of companies that want to use RPA.
TiO<sub>2</sub> 담지 스테인리스 강 섬유 광촉매 제조 및 광촉매 활성 평가
송선정,김경석,김경환,이휘지,조동련,김종범,박희주,손호경,김종호,Song, Sun-Jung,Kim, Kyoung Seok,Kim, Kyung Hwan,Li, Hui Jie,Cho, Dong Lyun,Kim, Jong Beom,Park, Hee Ju,Shon, Hokyong,Kim, Jong-Ho 한국공업화학회 2008 공업화학 Vol.19 No.6
수처리에 있어서 분말 $TiO_2$ 광촉매가 안고 있는 문제점을 극복하기 위하여 스테인리스 강 섬유를 지지체로 한 $TiO_2$ 담지 광촉매($TiO_2/SSF$)를 제조하였다. 초음파 세척기를 이용하여 담지된 $TiO_2$의 부착강도를 살펴보았으며, 메틸렌블루와 포름산 분해실험을 통하여 광촉매 활성을 평가하였고, 대장균과 비브리오균에 대한 살균실험을 통하여 살균능력을 평가하였다. 담지된 $TiO_2$는 30 min간의 초음파 처리 후에도 95% 이상이 남아 있을 정도로 강한 부착력을 보였으며, UV 하에서 60%의 메틸렌블루와 38%의 포름산을 1 h 만에 각각 분해시키는 광촉매 활성을 보였고, 대장균과 비브리오균에 대하여 99.9% 이상의 높은 살균능력을 보였다. 포름산 분해의 경우에는 산화제를 첨가하면 분해율이 증가하였으며, 특히 과산화수소를 첨가할 경우에는 분해율이 1 h 만에 80%로 증가하였다. $TiO_2$ impregnated stainless steel fiber photocatalysts ($TiO_2/SSF$) were fabricated to overcome inherent problems of powdery $TiO_2$ photocatalysts in water treatment. Adhesion strength of the impregnated $TiO_2$ was examined using an ultrasonic-cleaner. Photocatalytic activity was evaluated through decomposition experiment of methylene blue and formic acid. Bactericidal efficiency was evaluated through sterilization experiment of E. Coli and Vibrio Vulnificus. Adhesion strength of the impregnated $TiO_2$ was so high that more than 95% was left over even after the treatment in an ultrasonic-cleaner for 30 min. Methylene blue and formic acid were decomposed as much as 60% and 38% of the initial concentration and more than 99.9% of E. Coli and Vibrio Vulnificus were killed after 1 hour exposure to the prepared photocatalyst under UV irradiation. In the case of decomposition of formic acid, decomposition ratio increased if oxidants were added. Especially the decomposition ratio increased as high as 80% when hydrogen peroxide was added as an oxidant.
우희권,송선정,Woo, Hee Gweon,Song, Sun Jung 대한화학회 1997 대한화학회지 Vol.41 No.9
실란탈수소중합 반응을 위한 촉매들 및 중합반응 메카니즘들을 정리하여 기술하였다. 치환기 재분배 및 실란 소중합체를 생성하는 후기 전이금속 착물 촉매들과는 달리 전기 전이금속 착물 촉매들 특히 4족 전이금속 메탈로센계 촉매의 효과가 우수하였다. 4족 전이금속 메탈로센계 촉매의 효과를 극대화 하기위한 노력들을 소개하였으며, 또한 다양한 치환기를 갖는 실란고분자의 합성, 실란고분자 유도체의 합성, 탈수소중합 촉매의 세라믹 화학에의 응용예들을 기술 하였다. 마지막으로 실란의 탈수소중합법의 미래 전망을 살펴 보았다. This review deals with (1) the catalytic systems and mechanisms for the dehydropolymerization of silanes to polysilanes, (2) the dehydropolymerization of versatile silanes, (3) the preparation of polysilane derivatives, and (4) the applications of catalytic dehydropolymerizing systems to ceramics. The efforts to maximize the catalytic efficiency of group 4 metallocenes were introduced. Finally, the future of this dehydropolymerizing techniques of silanes was foreseen.
질소 상압플라즈마를 이용한 TiO<sub>2</sub> 박막의 표면개질 및 광활성 평가
임경택,김경환,박준,김경석,박유정,송선정,김종호,조동련,Lim, Gyeong-Taek,Kim, Kyung Hwan,Park, Jun,Kim, Kyoung Seok,Park, Yu Jeoung,Song, Sun-Jung,Kim, Jong-Ho,Cho, Dong Lyun 한국공업화학회 2009 공업화학 Vol.20 No.4
상압플라즈마 공정을 이용하여 $TiO_2$ 박막의 표면을 개질하고 광촉매 활성을 평가하였다. $TiO_2$ 박막은 $TiO_2$ 졸-겔 용액에서 유리판에 dip-coating법으로 코팅한 후 소성 온도와 소성 시간을 변화시켜 가면서 제조하였다. 표면 개질에 사용된 플라즈마는 질소 플라즈마였으며, 방전전력, 처리시간 등의 공정변수를 변화시키면서 실험을 수행하였다. 광촉매 활성은 UV-A와 형광등 하에서의 메틸렌 블루 분해효율을 바탕으로 평가하였다. XPS 분석 결과, 박막의 표면에 소량의 질소가 도핑되었음을 알 수 있었으며, 광촉매 효율은 UV-A와 형광등 하에서 모두 증가하였고, 특히 형광등 하에서 좀 더 증가하였다. $TiO_2$ thin films were surface-modified with atmospheric plasma and their photocatalytic activities were evaluated. The films were deposited on glass plates by dip-coating in a $TiO_2$ sol-gel solution and sintered at various temperatures for various times. Nitrogen plasma was used for the modification and the experiments were carried out varying operational parameters such as discharge power and treatment time. Photocatalytic activity was evaluated based on the degradation efficiency of methylene blue (MB) under irradiation of UV-A and fluorescent light. According to XPS analysis, a little amount of nitrogen was found to be doped in the film surface after the modification. As a result, photocatalytic activity increased under irradiation of UV-A and fluorescent light, especially fluorescent light.