http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LabVIEW를 활용한 컴퓨터 기반의 제어 및 모니터링
송민규(Mingyu Song),김광동(Kim K.D.),제도홍(Je D.H.),노덕규(Roh D.G),한석태(Han S.T),위석오(Wi S.O),오세진(Sejin Oh) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.2Ⅱ
Virtual Instrument는 컴퓨터를 Main controller로 두어 사용자가 필요로 하는 요소들을 연결하여 컴퓨터 속의 가상 공간에 사용자가 정의한 Instrument를 구현하는 것을 그 기본 개념으로 한다. Virtual Instrument를 통하여 사용자는 여러 기능 및 함수를 소프트웨어적으로 추가할 수 있어 기존 방식에 비하여 보다 효율적으로 시스템 업그레이드 및 최적화를 수행할 수 있다. 또한 컴퓨터의 성능이 향상됨에 따라 Virtual Instrument의 성능도 증가하게 되는 기술적 이점을 얻을 수 있고 사용환경이 누구에게나 익숙하기 때문에 작업의 효율을 극대화시킬 수 있다. 이러한 여러 효율성에 근거하여 나온 개념이 컴퓨터 기반의 제어 및 모니터링으로써 향후 네트워크 기술을 수용하여 더욱 발전될 것으로 전망되고 있다.
다특징점 정보 및 최적화 기반 비조정 카메라 영상으로부터 머리 움직임 추정 방법
송민규(MinGyu Song),김진영(Jin Young Kim),나승유(Seung You Na) 한국지능시스템학회 2008 한국지능시스템학회 학술발표 논문집 Vol.18 No.1
머리의 자세 및 움직임 추적은 응시추적 및 시각운율 연구에서 필수적이다. 일반적으로 머리자세를 추정하는 방법은 보정된 카메라를 통해 추출된 얼굴의 특징점 정보를 이용한다. 그러나 실제 응용 분야에서는 보정되지 않은 카메라를 통한 머리 움직임을 추정해야 할 경우가 발생한다. 이에 따라 본 논문에서는 보정되지 않은 하나의 카메라를 이용, 단일특징점 정보를 이용한 머리 자세 추정 방법을 확장하여 최적화 기법을 도입한 다특징점 정보 기반 머리 자세 추정방법에 대하여 논하였다.
Lasertexturing을 이용한 Pattern의 폭과 깊이에 따른 마찰특성
정우영(WooYoung Chung),한형욱(HyungWook Han),송민규(MinGyu Song),민준원(JoonWon Min),정원용(WonYoung Jeung),이명호(MeungHo Rhee) 한국트라이볼로지학회 2010 한국트라이볼로지학회 학술대회 Vol.2010 No.11
Patterning samples based on various conditions were fabricated by Laser Surface Texturing. The surface pattern shape of samples was controlled using laser scanner machine combined with an pulsed fiber laser. For the tests, honeycomb patterned samples for the different depth and width of line condition was textured by laser surface texturing and then friction coefficient at various lubricant conditions measured into plate on plate friction tester. Experimental results depending on line width and depth of patterning, and lubrication condition of friction test, will be presented. This laser textured honeycomb pattern showed a good scuffing resistance behavior and comparatively high were resistance.
광학식 표면스캐닝 및 X-선 CT를 활용한 유물의 3차원 융합모델 제작 : 국립진주박물관 소장 삼총통
조영훈,김다솔,김해솔,허일권,송민규 국립중앙박물관 2019 박물관보존과학 Vol.22 No.-
이 연구에서는 표면형상 취득에 최적화되어 있는 광학식 정밀스캐닝과 내부 형상 획득에 사용되는 X-선 CT스캐닝 결과를 이용하여 삼총통의 내·외부 형상을 다각적으로 분석할 수 있는 3차원(이하 3D) 융합 모델을 제작하였다. 먼저 두 스캐닝 결과를 호환 가능한 확장자로 변환한 다음 상호간의 정합성을 검증하고자 3D 편차분석을 수행하였다. 이 결과, 두 스캐닝 모델은 대부분(56.98%) ±0.1mm 이내의 편차를 보였으며, 이 수치는 ICP 알고리즘 기반의 정합 및 병합에 큰 영향을 주지 않았다. 병합된 데이터는 총통의 외부 표면색 및 미세형상, 내부 두께 및 구조를 잘 표현하였다. 광학식 표면스캐닝과 X-선 CT스캐닝의 3D 융합 모델은 문화유산의 디지털기록화뿐만 아니라 제작기법 해석에 유용하게 사용되었다. 향후 박물관 전시 영역에서 전시품의 과학적 조사 정보를 보다 쉽게 관람객에게 전달하는 효과를 발휘 할 것으로 기대된다. This study was focused on the three-dimensional convergence modeling that can multilaterally analyze internal and external shapes of the Sam-Chongtong Hand Canon by optical precision scanning optimized for acquiring the surface shape and X-ray CT scanning used for obtaining the internal shape. First, the scanning results were converted by compatible extension, after which three dimensional deviation analysis was conducted to verify mutual conformities. Accordingly, most(56.98%) deviations between the two scanning models was found be ±0.1mm. This result did not influence registration and merging based on the ICP algorithm. The merged data exhibited the external surface color, detailed shapes, internal width, and structure of the hand canon. The three-dimensional model based on optical surface scanning and X-ray CT scanning can be used for traditional technique interpretation as well as digital documentation of cultural heritage. In the future, it will contribute to deliver accessible scientific information of exhibits for visitors.