http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송규하,곽현규,김산해,정인환,이종환 한국통신학회 2023 韓國通信學會論文誌 Vol.48 No.6
본 논문은 수동형 레이더(passive radar) 전자 재밍을 효과적으로 수행하기 위한 JSR(Jamming-to-Signal Ratio) 분석을 제시한다. 이를 위해 송신원, 표적 그리고 수동형 레이더로 구성되는 수동형 레이더 운용 기하학적 배치구조에서의 바이스태틱 거리 방정식으로부터 수동형 레이더에 대한 잡음 및 기만 재밍 각각에 대한 JSR 수식을 유도한다. 그리고 다양한 재밍 조건에서 수동형 레이더에서의 표적 탐지 결과를 기반으로 재밍 효과를 확인할 수 있는 모의실험 결과를 제시하여, 향후 수동형 레이더 재밍을 위한 재밍 기법별 JSR 및 재밍 출력 선정에 기여하고자 한다.
송규하,곽현규,김산해,정인환,이종환,이병남,Song, Kyuha,Kwak, Hyungyu,Kim, Sanhae,Jeong, Inhwan,Lee, Jonghwan,Lee, Byeongnam 한국군사과학기술학회 2022 한국군사과학기술학회지 Vol.25 No.3
In this paper, we analyze the performance of an FM radio based passive radar in the presence of deception jamming such as false-target generation. To do this, we examine the effects of applying the deception jamming signal to the passive radar through the derivation of the construction of the amplitude-range-Doppler(ARD) plot. The analysis results show that applying the deception jamming signal with the low power similar to the target echo signal generates false targets at positions set by the jamming variables compared to the real target position in the ARD plot. Also, it is possible to induce the jamming effect so that only false targets are detected by selecting appropriate jamming power. Simulations are included to verify the theoretical results and to discuss on the effectiveness of the deception jamming on the FM radio based passive radar.
전자전지원을 위한 새로운 레이더 신호 수신 블랭킹 기법
송규하(Kyu-Ha SONG),이동원(Dong-Weon LEE),한진우(Jin-Woo HAN),류시찬(Si-Chan LYU) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.7
The blanking interface between an ES system and a radar system on the same platform cause the unwanted radar signal separation in the process of the signal measurement of the ES system. In this paper, we propose the novel radar signal blanking method for ES. The proposed method extracts a standard of judgement which we can decide whether a radar signal is separated by the blanking interface and presents how to merge the separated signals. Test result is presented to show the performance of the proposed method.
4 채널 36 Gb/s 27-1 초고속 의사 이진수열 (PRBS) 발생기의 집적화 설계
남효현,박준식,송규하,박정동 대한전자공학회 2018 전자공학회논문지 Vol.55 No.1
In this paper, a 36 Gb/s 27-1 Pseudo-Random Bit Sequence (PRBS) generator is implemented using a 0.13 μm SiGe process. In order to achieve four different 36 Gb/s PRBS patterns from the half-rate PRBS architecture, the output of the 6th latch in the interleaved linear feedback shift register (LFSR) is connected to the input of one XOR, and 0th, 2nd, 3rd, or 5th output of the FF in the LFSR is used to the input of the other XOR. We also implemented a 4×1 clock distribution circuit using three size-reduced Wilkinson power dividers with lumped-elements having the size of 380×380 μm2 to apply clock signals to the same magnitude and phase to four independent PRBS generators. Also, a trigger circuit was designed to verify the normal operation of the PRBS generator. The power consumption per the implemented PRBS generator is 282.5 mW from the 1.2V 및 2.5V power supply voltages, and the size of the individual PRBS generator is 0.5×0.23mm2. 본 논문에서는 36 Gb/s급 27-1 Pseudo-Random Bit Sequence (PRBS) 신호발생기를 0.13μm SiGe 공정을 이용하여 구현하였다. 4 개의 서로 다른 36 Gb/s PRBS 패턴을 half-rate PRBS 구조에서 구현하기 위해 interleaved Linear Feedback Shit Register (LFSR)을 사용하여 6번째 latch의 출력은 항상 XOR의 입력단에 연결 하고 LFSR에서 0,2,3,5 번째 FF의 출력을 XOR의 다른 입력으로 사용하였다. 또한 4개의 독립적인 PRBS 신호발생기에 동일한 크기 및 위상을 가지는 4×1 clock 신호를 인가하기 위하여 Lumped-element를 사용하여 380×380 μm2 크기로 소형화된 3개의 Wilkinson 전력분배기를 이용하여 구현 하였다. 또한 PRBS 신호발생기의 정상동작을 검증하기 위해 trigger회로가 설계되었다. 구현된 PRBS 신호발생기당 전력소모는 1.2V 및 2.5V 전원전압으로부터 282.5 mW이고, 구현된 개별 PRBS 신호 발생기의 크기는 0.5×0.23 mm2이다.
FM 방송 기반 멀티스태틱 PCL 시스템 원형 배열 안테나 보정을 위한 Array Manifold 측정 및 검증
박준식,심홍석,안준일,송규하,Park, Junsik,Shim, Hongsuk,Ahn, Junil,Song, Kyuha 한국군사과학기술학회 2021 한국군사과학기술학회지 Vol.24 No.2
This study describes a method of measurement and verification of array manifold of uniform circular array antenna applicable to multistatic Passive Coherent Location(PCL) system using FM broadcasting. In an environment of outdoor test where FM broadcast signals are scattered, array manifold measurement methods using network analyzer and multi-channel digital receiver are introduced. Also, the descriptions and solutions for the test limits of each measurement method and the considerations affecting the measurement accuracy are presented. In addition, to verify the validity of the measured array manifold, the gain and phase difference were compared with the array manifold data obtained by EM simulation, and the effectiveness and accuracy of the measured array manifolds were compared and analyzed by estimating the direction of arrival of the FM broadcast signal received from the multistatic PCL system.
FM 라디오 기반 수동형 레이다에 대한 톤 재밍 효과 분석
곽현규,김산해,정인환,이종환,송규하,은창수 한국통신학회 2022 韓國通信學會論文誌 Vol.47 No.8
수동형 레이다는 자체 전파 송신이 없이 은밀한 감시가 가능하기 때문에 전장에서 전투기의 생존성을 위협하게된다. 따라서 전투기 보호를 위한 수동형 레이다 대응 재밍 기술에 대한 연구가 필요하다. 본 논문에서는FM(Frequency Modulation) 라디오 기반의 수동형 레이다에 싱글 톤, 가변 싱글 톤, 멀티 톤과 같은 다양한 재밍신호 인가 시 톤 종류에 따라 특정 패턴을 가지는 것을 ARD(Amplitude Range Doppler) 맵을 통해 확인하고, FM 기반 수동형 레이다에 대한 톤 재밍 효과는 시나리오 기반 모의실험을 통해 수동형 레이다의 CFAR(Constant False Alarm Rate) 검출 결과에서의 표적 검출 확률로 비교 분석하고자 한다. 톤 재밍신호 인가 시 FM 기반 수동형 레이다에 대한 톤 재밍 효과는 반송파 주파수의 싱글 톤 재밍신호 인가 시 우수함을 확인하였고, 또한 FM 방송 유효대역폭 내에 재밍신호 성분이 많을수록 재밍 성능이 우수함을 모의실험을 통해 확인하였다.