http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서용석,이영신,송오섭,Seo, Yongseok,Lee, Young-Shin,Song, Ohseop 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.2
This paper studies on the dynamic properties of Ti-6Al-4V alloy. After forming the four different micro structures(equiaxed, lamellar, and 2 bimodals) through heat treatments, static and dynamic properties of each structure were investigated quantitatively. Dynamic behaviors of the alloy are observed by the compressive split Hopkinson pressure bar(SHPB) tests. In additon, parameters of Johnson-Cook equation were determined from the SHPB test results. In order to verify the suitability of the parameters, high velocity impact tests were performed and the results were compared with the numerical analysis results. Although the flow stress and the fracture strain of the bimodal structures were higher than those of the equiaxed structure at the static tests, the superior dynamic properties were observed at the equiaxed structure due to the effects of higher maximum flow stress and fracture strain. From the numerical analysis, J-C parameters which are determined on this study describe well the dynamic behavior of Ti-6Al-4V alloy. Experimental and analysis results are consistent with ${\pm}5%$ of an average error.
서용석(Yongseok Seo),임동혁(Dong-Hyuck Im) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.11
본 논문에서는 온라인 교육 콘텐츠의 저작권 침해 문제 해결과 활용 활성화를 위한 인공지능 기반 기술들을 소개한다. 저작권 침해 점검, 재료 콘텐츠 자동태깅 및 분류, 저작권 안심 콘텐츠 생성 및 추천 기술을 이용하여 저작권 걱정없이 교육 콘텐츠를 생성하고 온라인으로 제공할 수 있는 교육 콘텐츠 플랫폼을 설계할 수 있다.
WLAN 대역의 변형된 십자형 개구 결합 마이크로스트립 원형 편파 배열 안테나
서용석(Yongseok Seo),안중모(Jungmo Ahn),정진우(Jinwoo Jung),이현진(Hyeonjin Lee),임영석(Yeongseog Lim) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.12
본 논문은 충분한 대역폭과 이득을 갖는 5.8 ㎓ 대역의 무선 LAN용 십자형 개구 결합 마이크로스트립 원형 편파 2×2배열 안테나를 설계?제작하였다. 설계한 안테나는 정사각형 패치를 사용하고 직렬 형태의 급전 선로위에 λ g/4 위상차가 나는 곳에 슬롯이 위치하게 하여 전류 방향이 최대?최소가 반복되게 하여 원형 편파를 발생시키게 된다. 기존의 십자형 슬롯 안테나 구조를 수정하여 두 개의 슬롯이 직각으로 교차하는 부분을 없애고 분리된 4개의 슬롯으로 안테나를 설계함으로써 후방 방사를 줄이고 배열을 통해 안테나의 지향성도 개선할 수 있다. 측정된 2×2 배열 안테나의 대역폭은 5.67~5.95 ㎓로 나타났으며, 최대 방사 이득은 10.59 ㏈i를 얻었다. In this paper, cross-aperture coupled microstrip circular polarization antenna is proposed for 5.8 ㎓ WLAN(Wireless Local Area Network). A single antenna consists of square patch and slots are located in series feed line with λ g/4 phase different which make current direction maximum and minimum repeatedly to generate RHCP(Right Handed Circularly Polarization). We are proposed new structure that removed the section which intersected at a right angle and were composed to four separated slots. The proposed cross slots reduce back lobe of radiation pattern and improve antenna gain. Impedance bandwidth of the manufactured 2×2 array antenna is from 5.67 to 5.95 ㎓ and the maximum radiation gain is 10.59 ㏈i.
극저온 유체의 비등을 고려한 관 내 다상 열 유동 CFD 시뮬레이션
서용석(Yongseok Seo),정소명(Sohmyung Chung),전규목(Gyumok Jeon),김재원(Jaewon Kim),박종천(Jongchun Park) 한국해양환경·에너지학회 2021 한국해양환경·에너지학회 학술대회논문집 Vol.2021 No.10
수소는 운송 효율의 극대화를 위해 극저온 상태로 유지되어야 하며, 액체수소와 같은 극저온 유체를 해석할 때 비등으로 인해 생성되는 증발가스(BOG)가 안전성 문제를 일으킬 수 있기 때문에 비등현상이 필수적으로 고려되어야 한다. 비등 현상의 다양성 및 무작위성으로 인해 많은 실험과 전산유체역학적 연구가 수행되어왔으나 열전달로 인한 비등 매커니즘은 여전히 정확하게 설명되고 있지 않다. 이에 본 연구에서는 극저온 유체를 이용한 운송선박 적하역 시스템 및 추진선박 연료공급 시스템으 구성하는 배관의 동특성 해석을 위해 상용 CFD 해석 프로그램인 STAR-CCM+(ver. 15.02.007)을 사용하여 극저온 유체의 상변화를 고려한 관 내 다상 열유동 검증 시뮬레이션을 수행하였다. Robinson[2001]에 의헤 수행된 실험 중 일부 케이스에 기화 모델인 벽면 비등 모델과 SST k-w 난류 모델을 적용하여 시뮬레이션을 수행하고, 이를 통해 얻은 벽면의 온도를 실험값 및 시뮬레이션값(Langari et al.[2018])과 비교하였고 생성된 기포가 관 내 유동에 미치는 영향을 확인하였다. 그 결과 벽면 비등 모델을 적용하여 얻은 결괏값이 Rohsenow 비등 모델을 적용한 Langari et al.[2018]의 결괏값보다 실험값에 더 근접하며 생성된 기포는 벽면의 전단응력을 감소시키고 유동을 발달시켜 압력 강하를 일으키는 것을 확인할 수 있었다. Hydrogen must be maintained at a cryogenic temperature to maximize transport efficiency, and when analyzing cryogenic fluids such as liquid hydrogen, boiling phenomenon must be considered essential because boil-off gas(BOG) generated by boiling can cause safety problem. Due to the diversity and randomness of the boiling, many experiments and CFD simulations have been conducted, but boiling mechanism due to heat transfer wasn’t accurately explained. Therefore, in this research, a multiphase-thermal flow simulation was performed with boiling of cryogenic fluid using STAR-CCM+(ver. 15.02.007), a commercial CFD analysis program, to analyze the dynamic characteristics of pipes constituting the cryogenic fluid. Among the experiments performed by Robinson[2001], the wall boiling model and SST k-w turbulent model were applied to some cases, and the wall temperature was compared to experimental and simulated values(Langari et al.[2018] and the effect of the generated bubbles on the flow in the pipe was analyzed. As a result, temperature obtained by applying wall boiling model is closer to experimental value than the result of Langari et al.[2018] obtained by applying Rhosenow boiling model. An it was confirmed that the generated bubbles reduce the shear stress of the wall and cause the pressure drop by devloping the flow.
< 구두-E-08 > Bio-Copolyester인 ECOZEN을 이용한 합성 목재 개발
서용석 ( Yongseok Seo ),장해근 ( Haekeun Jang ),김학성 ( Haksung Kim ),김태영 ( Taeyoung Kim ) 한국목재공학회 2019 한국목재공학회 학술발표논문집 Vol.2019 No.1
본 연구는 SK케미칼에서 세계 최초로 개발한 내열 바이오 코폴리에스터 고분자 소재인 ECOZEN을 이용하여 기계적 강도가 우수한 친환경 합성 목재를 개발하기 위해 수행되었다. 기존 폴리올레핀 소재를 이용하여 만든 합성 목재 바닥판 데크의 단점은 굴곡하중, 충격저항성(상온/저온) 및 굴곡 크리프 변형등의 기계적 강도가 낮아 파손이 쉽고, 길이선열팽창 계수가 커 계절 변화에 따른 치수 안정성이 떨어져 시공 후 들뜸 문제가 빈번하게 발생된다. 또한 폴리염화비닐 소재는 열안정제로 Cd-st Pb-st를 사용하고 있어 합성 목재 바닥판 데크로 적용 시 중금속이 용출되어 토양을 오염시킬 수 있는 문제점을 가지고 있다. 이에, 기존 합성 목재의 단점을 개선하기 위해 목분과의 계면접착력이 우수하고 기계적 강도가 우수한 ECOZEN을 이용하였다. ECOZEN을 이용하여 만든 합성 목재 바닥판 데크는 KS F 3230(목재 플라스틱 복합재 바닥판)규격 기준을 상회하고 반영구적으로 사용이 가능하다. 최근 플라스틱 산업 업계에서는 이산화탄소 발생량을 저감하기 위해 자원 재활용 및 친환경 바이오 소재에 대한 필요성이 대두되고 있다. 폐목재에서 회수한 목분 및 ECOZEN을 이용하여 만든 WPC(Wood Plastic Composites)소재는 목분 함량에 따라 다양한 성형 가공 방식(사출, 압출, 블로잉)으로 성형이 가능하며 나무 질감이 구현 가능한 플라스틱 컴파운딩 원료로서 다양한 건축 자재 및 친환경 패키징 용도에 적용 가능하다.