http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강설도로 위험구간 선정을 위한 평가지표 개발에 관한 연구
윤상훈,박근오,김근영,Yoon. Sang Hoon,Park. Keun Oh,Kim. Keun Young 한국방재학회 2012 한국방재학회 학술발표대회논문집 Vol.2012 No.1
산업화 및 도시화의 급속한 진전에 따라 도시통행량이 증가하고 있으며, 이러한 도시교통의 양상은 짧은 시간내에 많은 양의 눈이 내리면서 교통혼잡과 극심한 정체로 이어져 심각한 교통대란을 야기시키기도 한다. 이처럼 강설시의 원할한 통행을 도모하기 위한 방안의 하나로서, 도로의 구조 및 도로상의 다양한 위험요소들이 강설시의 차량통행에 어떠한 영향을 끼치는지에 대한 분석이 필요한 시점이며, 이를 위해 본 연구에서는 강설시 도로위험구간을 도출하기 위한 분석틀의 설정 및 중요도분석을 통해 보다 객관화된 지표를 선정하고자 하였다. 본 연구에서는, 1)평가지표의 개발을 위해 표적집단면접(FGI) 및 전문가 브레인 스토밍을 거쳐 최종 평가지표(지리 지형특성, 도로시설, 도로기하구조, 교통특성)를 도출하였으며, 2)도출된 평가지표들을 토대로 AHP분석을 실시하여 각 평가항목별 가중치를 산정하였다. 본 연구의 결과, 평가항목 측면에서 보면, 4가지 평가지표 중 교통특성이 강설도로 위험구간 선정시 가장 중요한 항목으로 도출되었는데, 이는 일반적인 시설이나 지리적인 특성보다는 강설시 가장 위험한 것이 교통량이나 대형차와 같은 교통적인 특성이라는 것으로 판단할 수 있다.
스위칭 손실 감소에 의한 단상 부스트 컨버터의 효율개선
김종수,오세진,박근오,Kim Jong-Su,Oh Sae-Gin,Park Keun-Oh 한국정보통신학회 2006 한국정보통신학회논문지 Vol.10 No.1
본 논문은 고주파 단상 부스트 컨버터의 스위칭 손실을 감소시킬 수 있는 새로운 방식을 제안한다. 이것은 기존의 부스트 컨버터에 별도의 스위칭 장치를 첨가한 형태를 가진다. 원래의 고속 스위칭 장치는 변함없이 전력변환을 수행하지만, 새로이 부가된 장치는 저속으로 동작하면서 고속 스위칭 소자에 흐르는 전류의 대부분을 우회시켜 스위칭 손실을 감소시킨다. 제안된 방법의 제어시스템은 매우 간단하다. 제어기는 멀티바이브레이터, 비교기 및 AND 게이트로 구성되고, 스위칭 소자의 오프 지속시간이 멀티바이브레이터에 의해 일정하게 유지되므로 최대 스위칭 주파수는 별도의 클럭 발생기 없이 제한된다. 본 논문에서는 제안된 컨버터의 형상, 설계 등을 언급하고 컴퓨터 시뮬레이션을 사용하여 제안된 방법의 스위칭 손실 감소, 효율향상에 관한 유효성을 입증한다. This paper proposes a new technique for improving the efficiency of single phase high frequency switch mode boost converter. This converter includes an additional boost converter that follows the main hish frequency switching device. The additional converter, which is controlled at lower frequencies, bypasses almost all the current in the main switch and the high frequency switching loss is greatly reduced. Both switching devices are controlled by a simple method; each controller consists of a one-shot multivibrator, a comparator and an AND gate, and the maximum switching frequency can be limited without any clock generator. The converter works cooperatively in high efficiency and acts as though it were a conventional high frequency switch mode converter with one switching device. This paper describes the proposed converter configuration, design, and discusses the steady state performance concerning the switching loss reduction and efficiency improvement. and the proposed method is verified by computer simulation.
기상 및 피해특성을 고려한 대설위험지역 구분에 관한 연구
윤상훈(Yoon, Sang-Hoon),박근오(Park, Keun-Oh),김근영(Kim, Geun-Young) 한국지역개발학회 2014 한국지역개발학회 세미나 논문집 Vol.2014 No.3
This research provides the baseline information for the response plan applicable to areal heavy snow-fall(HSF) characteristics by understanding areal weather(heavy snow-fall) & disaster damage characteristics and classifying HSF hazard areas applied to twenty-six cities and Guns of Chungcheong NamㆍBuk-Do. Our research results classifies the twenty-six cities and Guns into three types of HSF areas: high-risk significant-damage(HRSD) areas(HSF hazard areas), high-risk mild-damage (HRMD) areas(appropriate response-required areas), and low-risk significant-damage(LRSD) areas(potential risk areas). This means there is a difference of snow-fall and damage strength based on many factors within the same administrative boundary of Chungcheong NamㆍBuk-Do. Thus, it is necessary to apply the weather environments to snow removal systems responding to heavy snow-fall disasters. The results of our research is applicable to snow removal plans of Chungcheong Namㆍ Buk-Do.
고형대,박근오 木浦大學校 情報産業硏究所 1998 情報産業硏究誌 Vol.6 No.-
우리 나라의 많은 중소기업들이 정보화를 휘망하고 또 추진해 왔으나 대부분 실패하였고 또한 현재 운영되고 있는 정보시스템 역시 일선 관리자나 사원중심으로 되어 있기 때문에 경영층에서 정보화에 따른 직접적인 효과를 보지 못하고 있는 것이 사실이다. 본 논문에서 중소기업체 정보시스템 개발을 통해 관리자의 편의를 제공할 뿐만 아니라 경영자에게도 정확한 의사결정에 도움을 주는 다양한 정보를 신속 정확하게 제공함으로써 경쟁우위에 설 수 있도록 도움을 준다.
박태원,김인배,강정윤,박근오 대한금속재료학회(대한금속학회) 1992 대한금속·재료학회지 Vol.30 No.11
The liquid phase diffusion bonding of the 2090 Al-Li alloy has been investigated and effects of surface treatment, composition of insert metals and homogenizing heat treatment on the microstructure of bonded interlayer have been studied. Main results obtained in this study are as follows. 1) Good joint can be obtained by using Al-10% Si-1.5% Mg alloy as insert metal, but the eutectic structures in the grain boundary of base metal are observed. 2) When no cleaned base metals were bonded at 793K using Al-4.9% Zn as insert metal, oxide film(β-Al₂O₃and α-LiAlO₂) was seperated from base metal and subsequently moved toward the center of bonded interlayer. Properties of joint were poor. In joint of acid-cleaned base metal, properties of joint were improved. 3) Al concentration at the center of bonded interlayer was very high, because of dissolution phenomenon of base metal by liquid insert metal. 4) When acid-cleaned base metal was bonded for 3.6ks at 793K and homogenized for 86.4ks at 813K, the composition of bonded interlayer was similar to that of base metal, but the hardness of bonded interlayer was even lower than that of base metal. If homogenized joints were reheated for 1.8ks at 813K and then quenched, the hardness of bonded interlayer equivalent to base metal has been achieved and properties of joint were reasonable.