http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
파장 분할 다중화 방식을 사용하는 광 전송망을 위한 분리 제어 신호 방식
노선식,김수현,소원호,김영천,No, Seon-Sik,Kim, Su-Hyeon,So, Won-Ho,Kim, Yeong-Cheon 대한전자공학회 2000 電子工學會論文誌-TC (Telecommunications) Vol.37 No.6
본 논문에서는 WDM 망에서 연결의 설정 및 해제를 효율적으로 제어하기 위한 분리 제어 신호방식 (Separated Control Signaling Protocol : SCSP)을 제안하였다. 제안된 분리 제어 신호 방식은 기존의 연결 제어 기능을 파장 및 각 노드 자원의 가용성을 점검하는 호 제어와 망 자원의 예약 및 할당을 위한 베어러 제어로 분리함으로써, 자원을 예약하기 전에 망 자원의 가용성을 점검하고 망 자원의 예약 시간을 줄일 수 있도록 하여 효율적으로 망 자원을 이용하며 또한 연결 설정 요청 수락률을 증가시킬 수 있다. 분리 신호 방식을 위한 노드 구조는 호 제어 기능을 수행하는 호 제어기와 베어러 제어 기능을 수행하는 베어러 제어기로 구성하였으며, 이에 대한 각 제어기의 기능과 제어기간의 정보 교환을 위한 제어 메시지 및 프리미티브를 정의하고 상태 천이도를 설계하였다. 이를 기반으로 분리 신호 방식에서의 연결 설정, 해제 및 실패에 대한 정보 흐름도를 작성하였다. 제안된 분리 제어 신호 방식의 성능 평가를 위해 다양한 시뮬레이션을 수행하였다. 성능 평가 결과 연결 요청 거절 확률과 자원의 이용률 측면에서 분리 제어 신호 방식이 기존의 통합 제어 신호 방식보다 우수한 성능을 보임을 확인할 수 있었다 In this paper, we propose a novel control signaling protocol that efficiently controls connection setup and increases the utilization of network resources. The proposed protocol, Separated Control Signaling Protocol(SCSP), separates bearer control from call control lot WDM optical networks. The main function of call control is to check the availability of network resources such as wavelengths and receivers at destination node. Bearer control is to reserve and assign wavelengths. The signaling architecture of this protocol consists of call controller and hearer controller The call controller handles call setup and release, activates the beater controller, and manages the status of call and bearer. The bearer controller reserves wavelengths, sets up bearer, tears down bearer. and notifies the status of beater to call controller. The state transition diagrams of each controller are designed. Using control messages and related primitives, the information flows for call setup and bearer setup, hearer teardown and call release, and reaction for setup failures are described to evaluate the performance. The simulation results show that the separated control signaling protocol is superior to conventional one in terms of call blocking probability and resource utilization.
DOCSIS3.0 기반 케이블망에서 MAP 주기에 따른 성능평가
노선식,송재준,Roh, Sun-Sik,Song, Jae-Jun 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.6
DOCSIS 3.0 프로토콜은 채널-결합 기법을 기반으로 케이블망에서 망을 고도화하기 위해 제안된 표준이다. DOCSIS 프로토콜을 사용하는 망에서 망을 구성하는 CM과 CMTS간의 데이터 전송은 MAP 메시지를 통해 대역 요청과 전송 대역 할당을 받아 양방향 전송을 하기 때문에, MAP의 전송주기는 망 성능의 핵심적인 요소가 된다. 하지만 현재 표준안에서는 MAP의 구성요소와 용도에 대한 정의만 언급하고 있고, MAP 메시지의 전송주기에 대한 정의는 언급되어 있지 않다. 본 논문에서는 DOCSIS 3.0 기반의 케이블망에서 MAP 전송주기 에 따른 프로토콜의 성능을 평가하기 위해 OPNET을 통해 시뮬레이터를 개발하고, MAP 전송주기에 따른 망의 성능을 분석하였다. 성능 평가 결과 MAP 전송주기는 0.05sec일 때 최적의 망성능을 보임을 알 수 있었다. 본 연구의 결과는 DOCSIS 3.0 기반 케이블 망의 구축을 위한 중요한 성능 요소로 사용될 수 있다. DOCSIS 3.0 protocol are proposed to support high-speed cable network DOCSIS 3.0 MAC protocol regulates CM and CMTS channel transfer times through MAP message. So MAP Inter-arrival time is primary factor of network performance. However, standards does not include the details of MAP Inter-arrival Time affecting the performance of MAC protocols for DOCSIS 3.0. In this paper, we evaluated the performance of DOCSIS 3.0 protocol follow in MAP Inter-arrival Time. Based on the evaluation results, we propose the optimal MAP Inter-arrival Time. We found that the protocol shows best performance when the MAP Inter-arrival Time is 0.05sec. The research results can apply to performance element which important for the construction of DOCSIS 3.0 base cable networks.
WDM 링에서 SONET ADM 수를 최소화하기 위한 트래픽 그루밍 알고리즘
노선식,윤승진,김영천 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.5
본 논문에서는 파장 분할 다중화(Wavelength Division Multiplexing: WDM) 기법을 이용한 링 구조의 고속 광전송망에서 망 구성 비용의 주요 요소인 SONET ADM의 수를 줄이기 위한 효율적인 트래픽 그루밍 알고리즘을 제안하였다. 제안된 알고리즘은 송신지와 수신지간의 연결을 조합하여 최대의 완전 연결-링을 구성하는 연결-링 구성 알고리즘과 하나의 파장에 되도록 많은 노드를 수용할 수 있도록 그룹화하는 연결-링 그루밍 알고리즘으로 구성되었다. 이들 알고리즘은 불규칙하고 다양한 트래픽 및 망 상황을 고려하여 단방향과 양방향 링 모두에 적용될 수 있도록 하였으며, 연결-링 구성 단계에서는 절단 기법을 이용하여 공백을 최소활할 수 있도록 하였다. 또한 양방향 WDM 링에서는 트랙픽에 방향성이 존재하기 때문에 이를 고려한 방향 전환을 고려함으로써 w보다 효율적인 완전 연결-링 구성이 가능하였다. 제안된 알고리즘의 성능 평가를 위하여 다양한 망 상황 및 트래픽 요구사항에 대하여 시뮬레이션을 실시하였다. 시뮬레이션 결과 제안된 알고리즘이 다양한 트래픽 상황에서 기존의 알고리즘보다 SONET ADM 수를 줄일 수 있음을 보였다. In this paper, we propose an efficient traffic grooming algorithm to minimize to number of SONET ADMs which is the dominant cost of system in high speed optical ring networks. It is an optimal traffic grooming algorithm to be applied to both unidirectional ring and bi-directional ring under both uniform traffic and nonuniform traffic. The proposed traffic grooming algorithm consists of two subalgorithms : one is the algorithm to construct full connection-rings as many as possible to minimize gaps by cutting the connections and using redirection method, and the other is the algorithm to groom connection-rings into a wavelength to maximize the number of shared nodes. The simulation results show that the proposed algorithm is superior to conventional algorithm under various network conditions.
케이블망에서 UHDTV 콘텐츠 전송을 위한 MAC 프로토콜 설계 및 검증
노선식,최진수,김성훈 한국지식정보기술학회 2011 한국지식정보기술학회 논문지 Vol.6 No.1
In this paper, we propose the MAC protocol to support UHDTV contents in cable broadcast networks. To transfer 200Mbps 8K UHDTV contents channel bonding are used and the information of bonded channel are shared between Headend and Set-Top Box(STB). We design the network architecture and the format of the control message. The information flow of control messages and the procedure at STB are proposed. We develop OPNET based simulator and verify the designed MAC protocol.