http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
클럭 표류율과 기준 신호를 이용한 두 센서 노드간 시간 동기 알고리즘
김현수,전중남,Kim, Hyoun-Soo,Jeon, Joong-Nam 한국정보처리학회 2009 정보처리학회논문지 C : 정보통신,정보보안 Vol.16 No.1
Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp. 무선 센서 네트워크에서의 시간 동기 알고리즘은 위치 추적, 데이터 암호화, 중복 이벤트 감지 인식, 정밀한 TDMA 스케줄링 등의 다양한 응용을 위해서 필수적이다. 본 논문에서는 두 노드 사이에서 시간 보정을 위한 클럭 표류율과 기준 신호를 이용한 시간 동기 알고리즘인 CDRS을 제안한다. CDRS는 시간 동기를 위해 두 단계로 구성된다. 첫 번째 단계에서는 LTS를 이용하여 시간 보정 값인 노드간의 시간 차이와 클럭 표류율을 구한다. 이 단계가 끝나면 두 노드는 시간이 맞추어진 상태가 되고 클럭 표류율로 시간 차이를 보정할 수 있게 된다. 두 번째 단계에서는 동기 노드는 주기적으로 기준 신호를 전송한다. 비동기 노드는 수신된 신호를 사용하여 두 노드간 시간 차이를 측정하고, 시간 차이가 최대 허용 오차 범위를 초과하면 다시 첫 번째 단계를 수행한다. 시뮬레이션을 통한 성능 분석 결과, CDRS는 LTS 대비 시간 정확도가 향상된다. 또한 메시지 발생량이 LTS 대비 50% 감소하고, 기준 신호는 타임스탬프를 사용하지 않기 때문에 CDRS는 LTS에 비하여 시간 동기에 사용되는 에너지가 2.5배 정도 적게 사용된다.
결정화에 의한 4성분계 에너지 복합체 제조 및 열분해 특성
김병수 ( Byoung-soo Kim ),김재경 ( Jae-kyeong Kim ),안익성 ( Ik-sung Ahn ),김현수 ( Hyoun-soo Kim ),구기갑 ( Kee-kahb Koo ) 한국공업화학회 2019 공업화학 Vol.30 No.2
결정화/응집 공정을 이용하여 금속/금속산화물/분자화약/산화제로 구성된 구형 4성분계 복합체 3종을 제조하였다. 열중량 분석(TGA) 및 시차주사열량법(DSC)에 의한 열 특성 분석 결과 복합체를 이룬 분자화약의 분해 구간이 단축됨을 관찰하였고, ammonium perchlorate(AP) 분해 생성물인 HCl 및 ClO<sub>2</sub>에 의한 자가 촉매 반응에 의한 것으로 해석된다. 활성화 에너지 분석 결과 분자화약 분해 종료 구간에서 급격하게 활성화 에너지가 감소함을 확인할 수 있었으며, 이는 분자화약 분해 생성물 중 공통으로 발생하는 HNO<sub>2</sub>에 의한 것으로 판단된다. 본 연구에서 복합체 열분해 분석 결과로 부터 Distributed Activation Energy Model (DAEM)에 의해 모사된 활성화 에너지가 model-fitting 분석법인 Kissinger-Akahira-Sunose와 Flynn-Wall-Ozawa model에 의한 모사치보다 정확도가 대단히 우수함을 알 수 있었다. Three spherical quaternary composites composed of metal/metal oxide/high explosive/oxidizer were prepared by a crystallization/agglomeration process. From the characteristics of composites by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), the shortening of the decomposition zone of high explosives in the quaternary composite was observed, which may be attributed to the autocatalytic reaction caused by ClO<sub>2</sub> or HCl which are ammonium perchlorate (AP) degradation products. The activation energy analysis showed that the activation energy abruptly decreases at the end of the decomposition zone of high explosives, and it was considered to be caused by HNO<sub>2</sub> which is common in decomposition products of high explosives. The activation energy predicted from complex pyrolysis results by the distributed activation energy model (DAEM) showed much better in accuracy than those by model-fitting methods such as Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa models.
심정섭,김현수,이근득,김정국,Shim Jung-Seob,Kim Hyoun-Soo,Lee Keun-Deuk,Kim Jeong-Kook 한국군사과학기술학회 2004 한국군사과학기술학회지 Vol.7 No.2
Nitramine-polymer composites suffer from a problem known as dewetting. Dewetting adversely affects the performance and the sensitivity characteristics of an explosive composition. Voids, which are generated between explosive particles and binder on dewetting, act as initiation sites. For a PBXs as well as propellants, where good adhesion and mechanical properties are of great importance, dewetting therefore must be prevented by strong adhesion between the filler and the binder. The surface energy of materials is measured by Wilhelmy plate and wicking method. The interfacial energy between the filler and the binder is calculated from the disperse phase and the polar phase of surface energy. Time dependent compressive properties of composite explosives have been determined by stress-strain curves obtained at different strain rates and temperatures. The interfacial state of the PBX was observed through SEM. It was found from the result that the interface between the explosive and the binder becomes better adhesion with decreasing interfacial tension and increasing work of adhesion. The result clearly shows that the castable PBX has good adhesion more than the pressable PBX.
트리나이트로이미다졸 치환체들의 화약성능 및 감도 예측 분석
전영진,김현수,김진석,조수경,Jeon, Yeongjin,Kim, Hyoun-Soo,Kim, Jin Seuk,Cho, Soo Gyeong 한국군사과학기술학회 2017 한국군사과학기술학회지 Vol.20 No.4
Various chemical properties including density and heat of formation of 1-substitued trinitroimidazoles (TNIs) were estimated by using density functional theory (DFT). Using chemical properties estimated by DFT, explosive performance and sensitivity of 1-substitued TNIs were analyzed by following the ADD Method-1 procedure. The results were displayed on two-dimensional performance-sensitivity plot, and were compared with those of explosive molecules commonly used in many military systems. Different 1-substituents of TNI made that both explosive performance and impact sensitivity were changed significantly. Methyl substituted TNI became moderately insensitive and slightly less powerful. Amino, fluoro, picryl, and difluoroamino substituted TNIs were highly powerful like RDX and HMX, but greatly sensitive. Nitro substituted TNI was predicted to be extremely sensitive to be handled as a secondary explosive.