농업인의 유기농업 기술개발 만족도 조사

김진호,이상범,박광래,홍승길,이초롱,김민기,김용기,이상민,변영웅,고병구,Kim, Jin-Ho,Lee, Sang-Beom,Park, Kwang-Lai,Hong, Seung-Gil,Lee, Cho-Rong,Kim, Min-Gi,Kim, Yong-Ki,Lee, Sang-Min,Byeon, Young-Woong,Ko, Byong-Gu 한국유기농업학회 2018 韓國有機農業學會誌 Vol.26 No.2

This study was conducted to investigate farmers' satisfaction in organic farming technologies developed by the Rural Development Administration (RDA). The survey targeted farmers who were eco-friendly or interested in eco-friendly agriculture. 70% of the target farmers were doing eco-friendly farming, and the satisfaction rate of the technology developed by the RDA was 3.85 points. The satisfaction of the farmers who participated in demonstration and demonstration of the farming field of the developed technology was 4.00 and the satisfaction level of organic farming instruction manual was 3.95. In addition, 38.4% of the surveyed areas were found to be pest control areas, and the impacts on the satisfaction of the organic cultivation related technology utilization and the satisfaction of the organic cultivation guide were analyzed. As a result, the RDA needs to develop and supply customized technology for aged small farmers.

단치소요산가감방(丹梔逍遙散加減方)이 streptozotocin으로 유발된 고혈당 생쥐에 미치는 영향

김진호,김경수,김정상,Kim, Jin-Ho,Kim, Kyung-Soo,Kim, Jeong-Sang 대한한의학방제학회 2005 大韓韓醫學方劑學會誌 Vol.13 No.2

This study has been carried out to understand the effect of Danchisoyosangagambang (DC) on the hyperglycemic mice induced with streptozotocin(STZ). Experimental groups were made diabetic mice by intraperitoneal injection of STZ(60 mg/kg of body weight) tw ice by 24 h interval and then 120 mg/kg STZ was injected again 3 days after the earlier treatment. Control group was administered mice with 0.9 % saline(2 mL/kg), and experim ental groups were administered DC extract(DCA group, 10 mg/kg/day; DCB group, 30 mg/kg/day) after hyperglycemic induction for 6 weeks. The body weight of experimental groups was lower than control. The blood glucose concentration increased continuously, rea ching to 298.9 mg/dL after 6 weeks, however, experimental groups of the DCA and DCB groups significantly(p<0.0l) decreased in the 4, 5, and 6 weeks groups. Blood glucose tolerance test was not significant between control and experimental groups. We examined the blood transaminase activities to know the effect of herbal medicine on liver function. The GOT activities were lower in group DCB than in control. The GPT activities were lower in group DCA and DCB than in control. The content of triglyceride was significantly increased in group DCA compared to control. The SOD and catalase activities were higher in the group DCA compared to control. The results of immunohistochemical study, a few of insulin positive cells observed in the control and experimental group. These results suggest that administration of DC extract to the hyperglycemic mice decreased the blood glucose level.

관계형 OLAP 데이터 웨어하우징 환경에서 조인과 집계함수를 포함하는 질의의 효율적인 처리

김진호,김윤호,김상욱,Kim, Jin-Ho,Kim, Yun-Ho,Kim, Sang-Wook 대한전자공학회 2002 電子工學會論文誌-CI (Computer and Information) Vol.39 No.5

대용량의 데이터가 저장되는 데이터 웨어하우징 환경에서 조인이나 집계 함수와 같은 고비용의 연산의 효율적인 처리는 매우 중요하다. 본 논문에서는 집계 함수(aggregate function)와 조인(join)이 모두 포함된 질의를 처리하는 새로운 기법을 제안한다. 제안하는 기법은 먼저 차원 테이블(dimension table)을 미리 그루핑한 후, 비트맵 조인 인덱스(bitmap join index)를 이용하여 조인을 처리하는 방식을 사용한다. 이 결과, 사실 테이블(fact table)만을 접근하여 집계 함수를 처리함으로써 기존 기법이 가지는 성능 저하의 문제점을 해결할 수 있다. 기존 기법과 제안하는 기법에 대한 비용 모델(cost model)을 정립하고, TPC-H 벤치마크를 기반으로 하는 다양한 시뮬레이션을 수행함으로써 제안된 기법의 우수성을 규명한다. Efficient processing of expensive queries that include joins and/or aggregate functions is crucial in data warehousing environment since there reside enormous volume of data. In this paper, we propose a new method for processing of queries that have both of joins and aggregate functions. The proposed method first performs grouping of the dimension table and then processes join by using the bitmap join index. This makes only the fact table accessed for processing aggregate functions, and thus resolves the serious performance degradation of the existing method. For showing the superiority of the proposed method, we suggest the cost models for the proposed and existing ones, and perform extensive simulations based on the TPC-H benchmark.

자란만 패류양식해역의 물리환경 설명을 위한 평균체류시간 산정

김진호,박성은,김영민,김청숙,강성찬,정우성,심보람,엄기혁,Kim, Jin Ho,Park, Sung-Eun,Kim, Youngmin,Kim, Chung Sook,Kang, Sungchan,Jung, Woo-Sung,Sim, Bo-Ram,Eom, Ki-Hyuk 한국환경과학회 2020 한국환경과학회지 Vol.29 No.3

Residence time is defined as the time taken for a material in a system to leave the system. The residence time characteristics in shellfish aquaculture determine the dispersion of excretion from aquaculture farms, along with the supply of food by seawater exchange. In this study, we estimated the spatial distribution of average residence time in the shellfish farming area using a particle tracking model. As a result, a relatively short average residence time of about 20 days or less was calculated in most areas, but an average residence time of more than 40 days was calculated in the inner areas. Relatively long average residence times were calculated along the west coast compared to the east coast, with the longest average residence time of more than 50 days in the northwestern areas. It can be inferred that the disturbance of the benthic ecosystem caused by shellfish farms is likely to be large because of the relatively weak dispersion of excrement from shellfish farms located on the west coast, especially in the northwest region. This distribution of average residence time is important for understanding the potential effects of seawater exchange on the environmental sustainability of shellfish farms, along with the seawater circulation characteristics of Jaran Bay.

양궁 선수의 마음챙김 능력 향상을 위한 심리훈련 프로그램 적용

김진호(Kim, Jin-Ho),오원석(Oh, Won-Seok) 한국사회체육학회 2017 한국사회체육학회지 Vol.0 No.67

The purpose of this study is to investigate the effects of mindfulness training with psychological techniques in a professional archery team in South Korea. First of all, it is conducted to find the changes in mindfulness through the KIMS during the mindfulness training, and to analyze the changes in both mindfulness and psychological technique factors. After ten times of meditation (1h-1h30m/1d), ACT and MAC based on the mindfulness training program, there were significant positive influences of psychological factors such as techniques, acceptance, concentration behavior and attention behavior on an intervention group compared to a control group, resulting in KIMS. Although there were no significant differences in confidence and teamwork in the intervention group after the psychological techniques, there were positive effects on willpower, goal setting , concentration, anxiety control and imagery statistically in the intervention group. In conclusion, mindfulness training has positive effects on the mindfulness in Korean archers. This training also has a positive influence on psychological technique factors such as attention, imagery, concentration and anxiety control. According to previous literatures, it is proved that there were positive effects on the psychological technique factors with the changes in mindfulness. Therefore, it is required to develop tools which can measure the mindfulness and to apply the correlation of mindfulness and psychological techniques to the field.

위성체 자세제어 기술

김진호,Kim, Jin-Ho 한국위성정보통신학회 1994 위성통신과 우주산업 Vol.2 No.1

Microstructure and Electrical Properties of Pb[(Mg,Mn)Nb]O3-Pb(Zr,Ti)O3 Piezoelectric Ceramics

김진호,Jong-Hwa Kim,Seung-Woo Baik 한국전기전자재료학회 2005 Transactions on Electrical and Electronic Material Vol.6 No.5

Phase evolution, microstructure and the electrical properties such as kP and Qm of Pb(Mg1/3Nb2/3)O3[PMN]-Pb(Mn1/3Nb2/3)O3[PM΄N]-PbZrO3[PZ]-PbTiO3[PT] quaternary system were investigated within the compositional ranges 0≤y≤0.125, y+z=0.125, and 0.39≤x≤0.54 of the formula Pb0.97Sr0.03[(Mg1/3Nb2/3)y (Mn1/3Nb2/3)z (ZrxTi1-x)1-(y+z)]O3. In the case of increasing Mn/(Mg+Mn) ratio for a fixed Zr/Ti ratio of 47.5/52.5, phase relation remained unchanged but the grain size drastically decreased, and the electrical properties changed as following: both kP and Qm reached the peak values at Mn/(Mg+Mn)@0.317 and gradually decreased; e33Tshowed a monotonic decrease; P-E hysteresis loop gradually changed to asymmetrical one, and Ei increased in correspondence. With increasing Zr/Ti ratio for a fixed Mn/(Mg+Mn) ratio of 0.317, on the contrary, the cell parameter (a2c)1/3 gradually increased, and tetragonal-rhombohedral morphotropic phase boundary appeared in the range of 51/49≤Zr/Ti≤54/46. In the meantime, the grain size substantially increased, and the electrical properties changed as following: kP and e33T reached peak values at Zr/Ti=51/49 and 48/52, respectively, and then gradually decreased; change of Qm was adverse to kP; both EC and Ei considerably decreased while PS moderately increased. For the system 0.125(PMN+PM΄N)-0.875PZT studied, the composition Mn/(Mg+Mn)=0.317 and Zr/Ti=51/49 revealed some promising electrical properties for piezoelectric transformer application such as kP=0.58, Qm@1000, and eT33=970, as well as dense and fine-grained microstructure.

디지털 프린팅용 세라믹 잉크의 유약표면 인쇄적성 및 특성평가

김진호,황광택,조우석,한규성,Kim, Jin-Ho,Hwang, Kwang-Taek,Cho, Woo-Seok,Han, Kyu-Sung 한국결정성장학회 2017 한국결정성장학회지 Vol.27 No.5

$1000^{\circ}C$ 이상의 고온에서도 안정적인 발색 특성을 보이는 세라믹 잉크를 활용한 디지털 프린팅 기술은 우수한 내구성을 가지는 제품을 다양한 디자인을 적용하여 생산할 수 있는 친환경 공정이라는 장점으로 인해 최근 관심이 높아지고 있다. 특히 건축용 세라믹 타일 산업에서 잉크젯 프린팅 기술 도입을 통한 디지털 공정으로의 전환은 점점 가속화되고 있으며, 이와 관련된 프린팅 시스템 및 고온발색 세라믹 잉크에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 세라믹 타일의 표면 유약층에서 고온발색 세라믹 잉크의 인쇄적성을 분석하였다. 디지털 4원색인 Cyan, Magenta, Yellow, Black 색상의 고온발색 세라믹 잉크가 프린팅된 세라믹 타일의 표면 및 단면의 미세구조를 분석함으로써 세라믹 잉크의 종류에 따른 인쇄특성에 대해 비교하였다. 또한 고온 열처리 공정이 필수적으로 요구되는 세라믹 소재의 특성상 잉크젯 프린팅 후 세라믹 잉크 패턴의 열처리 공정에 따른 거동변화에 관하여 고찰하였으며, 세라믹 타일 유약층에서 세라믹 잉크의 인쇄적성은 미세구조 및 고온 소성 과정에 큰 영향을 받고 있음을 확인하였다. Digital ink-jet printing technology using ceramic ink, which is thermally stable at high temperature above $1000^{\circ}C$, has an advantage of eco-friendly process applicable to manufacturing products with an excellent durability and various designs. Recently, replacement from conventional manufacturing process to digital process using ink-jet printing technique has been significantly accelerated in ceramic tile industry. In this study, we investigated ink-jet printability of ceramic ink on ceramic tile. Cyan, magenta, yellow, black ceramic inks, which are digital primary color of ink-jet printing, were printed on glazed surface of ceramic tiles, and their printabilities were comparatively analyzed. High temperature sintering process is generally required for manufacturing ceramic products, thus effect of sintering process on printed pattern of ceramic ink was also investigated by analyzing ink penetration depth and ink dot area.

상악 구치부 임플랜트 보철수복시 치관/치근비에 따른 응력 분포에 대한 유한 요소 분석

김진호,김형섭,최대균,권긍록,Kim, Jin-Ho,Kim, Hyung-Seob,Choi, Dae-Gyun,Kwon, Kung-Rock 대한치과보철학회 2006 대한치과보철학회지 Vol.44 No.5

Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.

알루미나 골재를 첨가한 FA-BFS계 지오폴리머 세라믹스의 열확산에 대한 표면 특성

김진호,박현,김경남,Kim, Jin-Ho,Park, Hyun,Kim, Kyung-Nam 한국결정성장학회 2019 한국결정성장학회지 Vol.29 No.2

Geopolymer는 시멘트와 비교하여 $CO_2$ 배출량의 감소, 내화성, 낮은 열전도성 등 다양한 장점을 보유하고 있는 eco-friendly 건설재료이다. 그러나 표면에 화염을 가할 경우 geopolymer panel 표면의 열적거동에 대한 연구결과는 많지 않다. 본 연구에서는 내열성 건축자재로서 화염노출시 geopolymer 경화체의 표면특성을 조사하기 위하여 alumina 골재가 사용된 geopolymer 경화체 표면의 화염노출 특성에 대하여 조사하였다. 화염노출시 panel의 외형변형 및 열충격에 의한 크랙은 없었으며, calcite의 잔존량과 aluminosilicate gel의 halo 패턴으로 보아 화염에 의한 탈탄산 및 탈수는 표면에 국한되어 발생했으며, geopolymer 경화체의 내구성은 화염조사 후에도 유지되고 있는 것으로 판단된다. Quartz와 calcite가 감소함에 따라 gehlenite와 calcium silicate가 증가하는 경향을 나타내고 있으며, BFS의 치환량이 많을수록 현저하게 나타난다. 화염노출에 따른 미세구조의 변화는 탈탄산, 결정수의 탈수 등으로 기공의 형성과 발전되는 과정을 거쳐 calcium silicate, gehlenite 등과 같은 새로운 결정상의 형성에 의해 geopolymer panel 표면의 치밀화와 강화기구로 작용하여 내구성이 향상된 것으로 생각된다. Geopolymer is an eco-friendly construction material that has various advantages such as reduced $CO_2$ emission, fire resistance and low thermal conductivity compared to cement. However, it has not been many studies on the thermal behavior of the surface of the geopolymer panel when flame is applied to the surface. In this study, surface characteristics of hardened geopolymer on flame exposure was investigated to observe its characteristics as heat-resistant architectural materials. External structure changes and crack due to the heat shock were not observed during the exposure on flame. According to the residue of calcite and halo pattern of aluminosilicate gel, decarboxylation and dehydration were extremely limited to the surface and, therefore, it is thought that durability of hardened geopolymer was sustained. Gehlenite and calcium silicate portion was inversely proportional to quartz and calcite and significantly directly proportional to BFS replacement ratio. Microstructure changes due to the thermal shock caused decarboxylation and dehydration of crystallization and it was developed the pore and new crystalline phase like calcium silicate and gehlenite. It is thought that those crystalline phase worked as a densification and strengthening mechanism on geopolymer panel surface.