RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 분리막 기반 하수처리장 재이용 공정분석

        해도 ( Hae-do Kim ),박지성 ( Ji Sung Park ),경묵 ( Keung Muk Kim ),문성근 ( Sung Keun Moon ),일정 ( Yil Joung Kim ) 한국농공학회 2013 한국농공학회 학술대회초록집 Vol.2013 No.-

        하수처리장 방류수 재이용은 대체수자원이라는 경제적 측면과 하수처리수에 포함되어 있는 오염부하량의 저감이라는 환경적 측면의 이점이 있는 반면 재이용시 하수처리수에 포함되어 있는 바이러스 및 대장균 등 위해성 물질에 의한 안전성 문제 및 위해성물질의 완전한 제거를 위한 추가 고도 수처리 공정이 불가피하게 필요하다. 고도 수처리 공정으로는 UF(울트라 필터) 및 NF(나노필터) 등 분리막을 이용한 수처리공정의 적용이 수질적인 측면에서 가장 보장성이 크다. 하지만 분리막을 이용한 수처리공정의 경우 분리막을 주기적으로 교체하는 비용발생과 함께 정기적으로 분리막 세척 및 복잡한 공정의 작동 등 전문적인 유지관리기술이 뒷받침되어야 정상적으로 수처리 관리가 가능하다. 또한 기존의 하수처리장에서 재이용을 목적으로 별도의 수처리 시설을 두게 되는 경우 방류수 이용방법이 추가적으로 가압시설 및 공급시설이 필요하고, 방류수의 수질성상에 따라서 주처리 시설인 분리막의 적정 이용을 위해 전처리 시설 및 분리막 세정을 위한 후처리 시설이 추가적으로 필요하다. 본 연구에서는 하수처리수의 재이용을 목적으로 기존하수처리장에 추가적인 분리막 시설을 계획하는 경우 발생가능한 문제점을 도출하고, 문제점에 대한 해결방안으로 전처리와 후처리시설을 검토하여 최종적으로 재이용공정의 표준화 도출을 하는데 있다. 연구 결과 기존하수처리장에서 방류되는 방류수의 수질적 특성은 기본적으로 하수처리장 방류수 수질기준에 의거 방류되고 있지만 재이용 목적의 수질기준과는 상의하여 별도의 재이용시설을 통해 수질기준에 적합하도록 재처리가 필요하고 방류수의 유입성상이 연중 일정하지는 않기 때문에 적정한 전처리 필터를 사용하여 분리막이 처리할 수 있는 범위의 유입수 성상이 될 수 있도록 해주어야 한다. 또한 분리막 적용의 가장 중요한 부분으로 분리막 세정기술이 필요하며, 기존의 분리막 운영시 발생되는 폐수가 기존 하수처리장 운영에 지장을 줄 수 있으므로 폐수량 저감방법이 매우 중요하다. 또한 농업용목적의 하수재이용의 경우 적정하게 처리하더라도 실제 공급단계에서 재이용수 사용자 안전성을 고려하기 위해 사용지역에 대한 위해성 분석이 반드시 필요하다.

      • SCOPUSKCI등재

        착제중합법에 의한 1, 2족 원소가 $Y_2O-# : Eu$ 형광체의 합성광 발광특성

        박상미,창해,박정규,박희동,장호겸,Park, Sang Mi,Kim, Chang Hae,Park, Joung Kyu,Park, Hee Dong,Jang, Ho G. 대한화학회 2001 대한화학회지 Vol.45 No.3

        $Y_2O_3$: Eu 형광체는 고효율, 열적 화학적 안정성을 갖고 있어서 평판 표시 소자용 적색 형광체로 널리 사용되고 있다. 고분해능과 고효율을 가지는 평판 표시 소자는 작은 크기의 구형 입자를 가진 형광체를 필요로 한다. 본 연구에서는 착체 중합법을 이용하여 100-300nm크기의 $Y_2O_3$ : Eu 형광체를 제조하였고 1족 혹은 2족 원소를 첨가하여 발광특성에 대한 영향을 검토하였다. Europium activated yttrium oxide ($Y_2O_3$ : Eu) is extensively applied to red phosphor for Flat Panel Display because of its high efficiency and the thermal and chemical stability. Flat Panel Display screen which have a high resolution and high efficiency needs to the phosphors of ideally small size spherical particle. In this study, we prepared a $Y_2O_3$ : Eu phosphor using polymeric precursor methods and investigated the codoping effect by introducing the group 1 or 2 elements to $Y_2O_3$ : Eu phosphor in view of improvement of luminance efficiency.

      • SCOPUSKCI등재

        소절개선을 이용한 심장수술의 임상고찰

        광호,정택,이서원,혜숙,임현경,이춘수,선경,Kim, Kwang-Ho,Kim, Joung-Taek,Lee, Seo-Won,Kim, Hae-Sook,Lim, Hyun-Kung,Lee, Choon-Soo,Sun, Kyung 대한흉부심장혈관외과학회 1999 Journal of Chest Surgery (J Chest Surg) Vol.32 No.4

        배경: 최근에 시작된 소절개선을 이용한 심장수은술 환자에게 미용상 효과가 좋으며, 통증이 적으며 빠른 회복을 가져온다. 본 교실에서는 그간 실시한 소절개심장수술의 현황을 임상고찰하였다. 대상 및 방법: 1997년 2월 흉골좌연종절개선으로 관상동맥우회술을 실시한 이후 1998년 11월까지 총 31례의 소절개술을 이용한 심장수술을 실시하였다. 남녀 비는 17:14였으며, 1세에서 75세까지의 연령분포를 보였다. 흉골좌연종절개술을 실시한 예는 9례로 관상동맥 질환으로 인공심폐기의 사용없이 박동상태에서 내유동맥으로 좌전행지관상동맥에 우회술을 실시하였는데, 그 중 1례는 내유동맥의 비꼬임으로 술 후 1주일 째 재수술한 경우였다. 흉골우연종절개는 1례로 승모판교련절개술 후 재발된 협착증에 대해 승모판치환술을 실시한 경우였다. 소흉골절개선으로 수술한 예는 21례로, 승모판치환 및 삼첨판성형술이 6례, 승모판치환술 5례, 중복판치환술 2례, 대동맥판치환술 1례, 좌심방점액종 1례, 심방중격결손증 2례, 심실중격결손증 2례, 우심실 자창 1례였다. 처음 5례는 T형의 흉골소절개를 실시하였으나 경험이 쌓이면서 대동맥기저부의 노출이 좋고 흉골 봉합시 안정감이 높은 화살모양의 흉골소절개를 실시하였다. 결과: 수술시간, 인공심폐 구동시간, 대동맥차단시간, 인공호흡기 사용기간, 수술 1일까지의 흉관배액양, 흉관 거치기간, 집중치료실 입원기간 등은 기존의 정중흉골절개선 예들에 비하여 큰 차이가 없었다. 수술 후 사망 예는 2례였으며 1례는 흉골소절개선으로 승모판치환 수술 1일에 대동맥 삽관부위의 파열로 출혈 사망하였고, 다른 1례는 흉골좌연종절개선으로 관상동맥우회술 후 2일에 부정맥으로 사망하였다. 사망의 원인과 수술절개선의 선택과는 직접적인 관련이 없었다. 합병증은 뇌색전증 1례, 창상의 혈종 1 례가 있었다. 결론: 소절개선으로도 정중흉골절개선과 마찬가지로 심장 수술을 효과적으로 실시할 수 있을 것으로 생각된다. Background: Minimally invasive technique for various cardiac surgeries has become widely accepted since it has been proven to have distinct advantages for the patients. We describe here the results of our experiences of minimal incision in cardiac surgery. Material and Method: From February 1997 to November 1998, we successfully performed 31 cases of minimally invasive cardiac surgery. Male and female ratio was 17:14, and the patients age ranged from 1 to 75 years. A left parasternal incision was used in 9 patients with single vessel coronary heart disease. A direct coronary bypass grafting was done under the condition of the beating heart without cardiopulmonary bypass support(MIDCAB). Among these, one was a case of a reoperation 1 week after the first operation due to a kinked mammary artery graft. A right parasternal incision was used in one case of a redo mitral valve replacement. Mini-sternotomy was used in the remaining 21 patients. The procedures were mitral valve replacement and tricuspid annuloplasty in 6 patients, mitral valve replacement 5, double valve replacement 2, aortic valve replacement 1, removal of left atrial myxoma 1, closure of atrial septal defect 2, repair of ventricular septal defect 2, and primary closure of r ght ventricular stab wound 1. The initial 5 cases underwent a T-shaped mini-sternotomy, however, we adopted an arrow-shaped ministernotomy in the remaining cases because it provided better exposure of the aortic root and stability of the sternum after a sternal wiring. Result: The operation time, the cardiopulmonary bypass time, the aorta cross-clamping time, the mechanical ventilation time, the amount of chest tube drainage until POD#1, the chest tube indwelling time, and the duration of intensive care unit staying were in an acceptable range. There were two surgical mortalities. One was due to a rupture of the aorta cannulation site after double valve replacement on POD#1 in the mini-sternotomy case, and the other was due to a sudden ventricular arrhythmia after MIDCAB on POD#2 in the parasternal incision case. Postoperative complications were observed in 2 cases in which a cerebral embolism developed on POD#2 after a mini-sternotomy in mitral valve replacement and wound hematoma developed after a right parasternal incision in a single coronary bypass grafting. Neither mortality nor complication was directly related to the incision technique itself. Conclusion: Minimally invasive surgery using parasternal or mini-sternotomy incision can be used in cardiac surgeries since it is as safe as the standard full sternotomy incisions.

      • SCOPUSKCI등재
      • SCOPUSKCI등재

        $Al^{3+}$, $Pr^{3+}$가 첨가된 Perovskite $La_{2/3}TiO_{3}와 Pyrochlore $La_{2}Ti_{2}O_{7}$의 발광 특성

        박상미,박정규,창해,박희동,장호겸,Park, Sang-Mi,Park, Joung-Kyu,Kim, Chang-Hae,Park, Hee-Dong,Jang, Ho-Gyeom 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.9

        $La_{2/3}TiO_3$, $La_2Ti_2O_7$는 유전성을 갖는 특징으로 인해 여러 분야에 이용되고 있다. 본 연구는 perovskite 구조의 $La_{2/3}TiO_3$와 pyrochlore 구조의 $La_2Ti_2O_7$를 모체로 하여 $Al^{3+},\;Pr^{3+}$가 첨가된 형광체의 발광 특성을 알아보고자 하였다. 두 구조 모두 $Pr^{3+}의\;^1D_2{\rightarrow}^3H_4$ 전이에 의한 적색 발광을 나타내었다. 본 연구에서는 perovskite 구조의 $La_{2/3}TiO_3$:Pr 형광체의 에너지 전이 과정과 그 임계거리에 대한 조를 통해 에너지 전달체로서의 $Al^{3+}$의 역할을 제시하였다. 또한, perovskite 구조의 $La_{2/3}TiO_3$와 pyrochlore 구조의 $La_2Ti_2O_7$ 사이의 발광특성 차이를 알아보기 위해서 trap-involved process와 charge transfer band를 조사하였다. $La_{2/3}TiO_3$, $La_2Ti_2O_7$ are used in various parts by dielectric properties. The purpose of the present study is to understand the photoluminescence properties of $Al^{3+}\;and\;Pr^{3+}$ doped perovskite-type $La_{2/3}TiO_3$ and pyrochlore-type $La_2Ti_2O_7$ phosphor, which characterized by the red emission $(^1D_2{\rightarrow}^3H_4)\;of\;Pr^{3+}$ of $Pr^{3+}$ ion. The explanation for the energy transfer and the corresponding critical distance were proposed on the role of Al^3+ ions as energy transfer mediates in perovskite-type $La_{2/3}TiO_3$:Pr phosphor. In order to clarify the distinction of photoluminescence propoerties between the perovskite-type $La_{2/3}TiO_3$ and the pyrochlore $La_2Ti_2O_7$, the trap-involved process and the charge transfer band have been investigated.

      • SCOPUSKCI등재
      • KCI등재
      • KCI등재

        InGaN UV bare칩을 이용한 $CaAl_{12}O_{19}:Mn^{4+}$ 형광체의 적색 발광다이오드 제조

        강현구,박정규,창해,최승철,Kang, Hyun-Goo,Park, Joung-Kyu,Kim, Chang-Hae,Choi, Seung-Chul 한국마이크로전자및패키징학회 2007 마이크로전자 및 패키징학회지 Vol.14 No.4

        A $CaAl_{12}O_{19}:Mn^{4+}$ red phosphor showed the highest emission intensity at a concentration of 0.02mole $Mn^{4+}$ and the high crystallinity and luminescent properties were obtained at $1600^{\circ}C$ firing temperature for 3hr. The synthesized phosphor showed a broad emission band at 658nm wavelength. Red light-emitting diodes(LEDs) were fabricated through the integration of on InGaN UV bare chip and a 1:3 ratio of $CaAl_{12}O_{19}:Mn^{4+}$ and epoxy resin in a single package. This coated LED can be applicable to make White LEDs under excitation energy of UV LED. [ $CaAl_{12}O_{19}:Mn^{4+}$ ] 적색 형광체는 $Mn^{4+}$이온이 0.02 mol 첨가되었을 때 최대 발광 세기가 관찰되었고 $1600^{\circ}C$, 3시간 소성조건에서 우수한 결정성과 발광 효율을 나타내며 중심 파장이 658 nm에서 관찰되었다. 본 연구에서 개발된 $CaAl_{12}O_{19}:Mn^{4+}$ 형광체를 에폭시와 함께 1:3으로 혼합하여서 InGaN UV 발광체의 Bare 칩 위에 코팅하여 중심파장이 658 nm인 적색 LED를 제조하였다. 적색 형광체를 이용하여, 기존의 UV LED를 여기 광원으로 다양한 느낌의 백색 발광체를 설계 할 수 있을 것이다.

      • SCOPUSKCI등재

        LED용 BaGa<sub>2</sub>S<sub>4</sub>:Eu<sup>2+</sup> 녹색 형광체의 합성 및 발광특성

        재명,박정규,경남,이승재,창해,Kim, Jae-Myung,Park, Joung-Kyu,Kim, Kyung-Nam,Lee, Seung-Jae,Kim, Chang-Hae 한국재료학회 2006 한국재료학회지 Vol.16 No.12

        [ $II-III_2-(S,Se)_4$ ] structured of phosphor has been used at various field because those have high luminescent efficiency and broad emission band. Among these phosphors, the europium doped $BaGa_2S_4$ was prepared by solid-state method and had high potential application due to an emissive property of UV region. Also, the common sulfide phosphors were synthesized by using injurious $H_2S\;or\;CS_2$ gas. However, in this study $BaGa_2S_4:Eu^{2+}$ phosphor in addition to excess sulfur was prepared under at 5% $H_2/95%\;N_2$ reduction atmosphere. Thus, this process could be considered as large scale synthesis because of non-harmfulness and simplification. The photoluminescence efficiency of the prepared $BaGa_2S_4:Eu^{2+}$ phosphor increased 20% than that of commercial $SrGa_2S_4:Eu^{2+}$ phosphor. The prepared $BaGa_2S_4:Eu^{2+}$ could be applied to green phosphor for white LED of three wavelengths.

      • SCOPUSKCI등재

        LED용 Ba<sup>2+</sup> Co-Doped Sr<sub>2</sub>SiO<sub>4</sub>:Eu 황색 형광체의 발광특성

        최경재,박정규,경남,창해,호건,Choi, Kyoung-Jae,Park, Joung-Kyu,Kim, Kyung-Nam,Kim, Chang-Hae,Kim, Ho-Kun 한국세라믹학회 2006 한국세라믹학회지 Vol.43 No.3

        We have synthesized a $Eu^{2+}-activated\;{(Sr,Ba)}_2SiO_4$ yellow phosphor and investigated the development of blue LEDs by combining the phosphor with a InGaN blue LED chip (${\lambda}_{em}$=405 nm). The InGaN-based ${(Sr,Ba)}_2SiO_{4}:Eu$ LED lamp shows two bands at 405 nm and 550 nm. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This 405 nm emission was used as an optical transition of the ${(Sr,Ba)}_2SiO_{4}:Eu$ phosphor. The 550 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the ${(Sr,Ba)}_2SiO_4$ host matrix. In the preparation of UV Yellow LED Lamp with ${(Sr,Ba)}_2SiO_{4}:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the epoxy-to-yellow phosphor ratio of 1:0.45. At this ratio, the CIE chromaticity was x=0.4097 and y=0.5488.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼