http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김재현,이주희,최재혁,Kim, Jae-Hyun,Lee, Joo-Hee,Choi, Jae-Hyuk 해양환경안전학회 2014 해양환경안전학회지 Vol.20 No.6
본 연구에서는 메탄 대향류 확산 화염내 탄소나노튜브의 합성에 대하여 실험 및 수치적 연구를 수행하였다. 아세틸렌을 일정비율로 메탄에 혼합하여 연료 가스로 사용하였으며, 탄소나노튜브의 합성을 위한 촉매로서 페로센이 이용되었다. 주요 인자로는 메탄 연료에 대한 아세틸렌의 혼합비율이며, 2 %, 6 %, 10 %로 혼합하였다. 탄소나노튜브를 채취한 그리드 위의 탄소나노튜브 합성 특성은 SEM 이미지로 분석되었다. 수치해석에서 화학반응 메카니즘으로는 GRI-Mech 3.0 이 적용되었다. 수치결과로는 아세틸렌 혼합 비율이 증가할수록 화염 온도도 증가하며 CO 몰분율도 증가하는 것을 알 수 있다. 실험결과로는 2% 아세틸렌 혼합 화염이 6 % 및 10 % 혼합 화염과 비교해 탄소나노튜브 합성이 잘 이루어졌음을 알 수 있었다. 이것은 6 % 및 10 % 아세틸렌 혼합화염의 경우 과도한 카본 소스의 생성이 발생해 오히려 화염 내 카본소스가 촉매입자로의 공급을 방해하기 때문이라 생각한다. 이 결과로부터 양호한 질의 탄소나노튜브 생성을 위해서는 적정한 양의 카본소스가 생성되어야 한다는 것을 알 수 있었다. In this study, experimental and numerical studies for the synthesis of carbon nanotube(CNT) in methane counterflow diffusion flame have been performed. Methane mixed with acetylene($C_2H_2$) was used as a fuel gas and ferrocene was used as a catalyst for synthesis of CNT. The major parameters was $C_2H_2$ mixing rate and mixing rates were 2 %, 6 %, and 10 %. Characteristics of CNT formation on grid were analyzed from SEM images. the chemical reaction mechanism adopted is GRI-MECH 3.0. Numerical results showed that flame temperature and CO mole fraction were increased with increasing acetylene mixing rate. Experimental results showed that the CNT synthesis in 2% acetylene mixture flame better than that of 6% and 10% acetylene mixture flames. It can be considered that 6% and 10% acetylene mixture flames generated the excessive carbon source and then it interrupted the supplement of the carbon source into ferrocene catalyst. It can be found that the supply of appropriate quantity of carbon source can make effect to synthesis of high purity of CNT.
김재현,Kim, Jae-Hyeon 한국광학기기산업협회 2012 光學世界 Vol.137 No.-
사진이란 빛으로 그리는 그림이다. 카메라의 파인더로 보고 느낀 아름다움을 구도와 구성으로 담아서 적절한 빛을 이용하여 사진 안에 담는다. 풍경사진의 기본은 자연이 만들어낸 아름다움과 마주하게 되는 순간부터 시작이다. 아름답고 신비로운 곳으로 걸어 들어가면 카메라 렌즈 안으로 이미 풍경이 녹아든다.
김재현,김광섭,이학주,Kim, Jae-Hyeon,Kim, Gwang-Seop,Lee, Hak-Ju 재료연구소 2013 機械와 材料 Vol.25 No.3
나노제품의 안전성은, 나노제품에 사용된 나노물질의 독성과 나노물질의 노출가능성을 동시에 고려함으로써 평가할 수 있다. 본 문서는 나노물질의 독성 데이터는 이미 확보된 것으로 가정하고, 나노제품의 안전성을 향상시키는 설계 절차에 대하여 기술한다. 나노제품에서 나노물질이 노출되는 정도를 기계적인 손상의 관점에서 평가함으로써 노출 가능성을 추정하고, 이 추정치를 나노물질의 독성값 및 노출 한계와 비교함으로써 나노제품의 안전성을 평가하거나 예측한다. 나노제품의 설계 단계에서 이러한 안전성 평가 및 예측 방안을 적용하는 방법을 설명한다.
원심모형실험용 소형 콘 개발 및 콘 선단저항치 특성에 관한 연구
김재현,김동준,김동수,추연욱,Kim, Jae Hyun,Kim, Dong Joon,Kim, Dong Soo,Choo, Yun Wook 대한토목학회 2013 대한토목학회논문집 Vol.33 No.2
현장지반의 공학적 특성을 파악하기 위한 콘 관입시험(Cone Penetration Test; CPT)은 원지반의 연속적인 강도 특성을 분석하여 다양한 지반변수를 손쉽게 획득할 수 있다는 점에서 널리 활용되고 있으며, 원심모형실험에서도 널리 활용되고 있다. 본 연구에서는 원심모형실험에서 콘선단저항치를 계측할 수 있는 직경이 10 mm인 소형 콘을 개발하고 원심모형실험에서의 적용성을 평가하였다. 개발된 콘으로 4자유도 로봇을 활용하여 원심모형 가속 상태에서 콘 관입시험을 수행하였다. 이 때, 원심가속도 수준을 4회 변화시켜 다양한 유효응력상태에서 콘 관입시험을 실험을 수행하였다. 그 결과, 얕은 관입깊이의 동일한 유효응력에서 콘 선단저항치는 g-level에 영향을 받으며, 선단저항치가 임계 깊이 도달하는 깊이는 g-level과 상대밀도가 커질수록 깊어짐을 확인하였다. 또한, 각 실험에서 임계 깊이에 도달한 선단저항치와 실내실험에서 획득한 지반물성을 이용하여 기존 경험식과 비교하였다. The standard CPT(Cone Penetration Test), which can be easily performed to investigate in-situ soil engineering properties, has been widely used. CPT are also widely being utilized in centrifuge model tests. In this study, a miniature cone with 10mm diameter was developed and its applicability in the centrifuge was evaluated. The developed miniature cone was equipped with a four degree-of-freedom in-flight robot. A series of cone penetration tests was performed under four centrifuge acceleration levels. As results, the cone resistances measured at the same confining stress within shallow penetration depth were affected by the centrifugal accelerations. The critical depth was proportional to the cone diameter and relative density. Cone resistances results below the critical depth and soil parameters obtained from the laboratory tests were compared with those by previously proposed empirical relations.
디지털 치료기술 산업 육성에 따른 투자와 경제적 파급효과
김재현 ( Jae-hyun Kim ),문종윤 ( Jong Youn Moon ),장지은 ( Jieun Jang ),심정연 ( Jung Yeon Sim ),신재용 ( Jaeyong Shin ) 한국보건행정학회 2020 보건행정학회지 Vol.30 No.4
The digital treatment technology industry is one of the core fostering industries of the Moon Jae-in government along with the global trend. The purpose of this study is to compare and analyze the investment and economic ripple effect on the related industries. To this end, we used the industry-related table, which is the actual measurement data for 2015 that the Bank of Korea actually measured and released every 5 years in 2019. The digital treatment technology industry was not clearly classified within Korea’s industrial classification system, so the contents of the industry-related survey were analyzed, and the digital treatment technology industry was reclassified and then analyzed. As a result of the analysis, it was analyzed that the production induction effect of the digital treatment technology-related industry in 2015 was 1.770, the value-added induction effect was 0.875, and the employment induction effect was 19.128, which was higher than that of other industries in Korea. As a result of the analysis of the economic ripple effect (scenario 1), the production inducing effect was about 370 billion won, the added value inducing effect was about 185 billion won, and the employment inducing effect was 4,044 people. The results of this study are expected to play a large role in economic revitalization as the effect of inducing production, increasing employment, and creating added value through fostering the digital treatment technology industry is expected to play a large role in activating the economy. It is expected to play a large role in providing central medical services. Therefore, it is expected that policy support for revitalizing the digital treatment technology industry through active investment support and tax benefits from the government to foster the digital treatment technology industry is necessary.