http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사장교의 초기형상해석을 위한 개선된 초기부재력법 및 TCUD법의 비교연구
김동영,조경식,김문영,Kim, Dong-Yeong,Jo, Kyeong-Sik,Kim, Moon-Young 한국전산구조공학회 2012 한국전산구조공학회논문집 Vol.25 No.1
사장교 시스템의 초기형상해석이라 함은 주형의 수직 처짐과 휨모멘트, 주탑의 수평변위와 휨모멘트를 최소화하면서, 고정하중과 평형을 이룰 수 있는 케이블의 장력과 무응력길이를 결정하는 방법으로 이 때, 케이블이 정착되는 주형의 수평위치, 주탑의 수직위치가 목표형상에 부합할 필요가 있다. 본 연구에서는 고정하중을 받는 사장교의 초기형상을 효율적이고 합리적으로 결정하기 위하여 개선된 초기부재력법과 TCUD법의 비교연구 결과를 제시하고자 한다. 주형과 주탑의 케이블 정착부에서 힘의 평형조건을 이용하여 주형의 수직처짐과 주탑의 수평변위를 효과적으로 제어할 수 있는 절점평형법을 초기 부재력법에 적용하여 초기치에 민감한 기존 초기부재력법을 개선한다. 또한 개선된 TCUD법을 이용한 초기형상해석 수행결과와 비교함으로서 두 방법의 정확성을 입증하고자 한다. Initial shape analysis for cable-stayed bridges should be able to find optimizated initial cable forces and unstrained length that minimize deflection and bending moments of the deck and pylon. Comparison study of an improved initial force method and TCUD method for determination of initial cable forces in cable-stayed bridges is presented in this paper. For this purpose, an elastic catenary cable element and a nonlinear frame element are firstly described. And concepts and algorithm of two analysis methods are then presented. Finally to demonstrate the validity and the accuracy of two methods, numerical examples for initial state problems of cable-stayed bridges are given and compared based on these methods.
튜브 배열에 따른 튜브/튜브시트 수압 확관 접합의 민감도 해석
김동영,김태완,Kim, Dong-Yeong,Kim, Tae-Wan 대한기계학회 1999 大韓機械學會論文集A Vol.23 No.11
The basic requirements to improve the joints quality of tube-to-tubesheet for heat exchangers are to obtain high residual contact pressures between the tubes and the tubesheet as well as low residual stresses in the transition zone of the tubes. The residual contact pressures and residual stresses which govern the joint quality are influenced by parameters such as material properties, geometric dimension of tube and tubesheet and expansion pressures. There are two types of tube layout patterns, triangular and square, which are frequently used for heat exchangers. The purpose of the present work is to examine the superior tube layout patterns considering the joints quality by comparing numerical results from sensitivity analyses which were performed for both of tube layout patterns.
CR 시스템을 이용한 방사선 종양학과의 Filmless 환경 구축
김동영,이지혜,김명수,하보람,이천희,김소영,안소현,이레나,Kim, Dong-Young,Lee, Ji-Hae,Kim, Myung-Soo,Ha, Bo-Ram,Lee, Cheon-Hee,Kim, So-Yeong,Ahn, So-Hyun,Lee, Re-Na 한국의학물리학회 2011 의학물리 Vol.22 No.3
The analog image based system consisted of a simulator and medical linear accelerator (LINAC) for radiotherapy was upgraded to digital medical image based system by exchanging the X-ray film with Computed Radiography (CR). With minimum equipments shift and similar treatment process, it was possible that the new digital image system was adapted by the users in short time. The film cassette and the film developer device were substituted with a CR cassette and a CR Reader, where the ViewBox was replaced with a small size PC and a monitor. The viewer software suitable for radiotherapy was developed to maximize the benefit of digital image, and as the result the convenience and the effectiveness was improved. It has two windows to display two different images in the same time and equipped various search capability, contouring, window leveling, image resizing, translation, rotation and registration functions. In order to avoid any discontinuance of the treatment while the transition to digital image, the film and the CR was used together for 1 week, and then the film developer was removed. Since then the CR System has been operated stably for 2 months, and the various requests from users have been reflected to improve the system. 방사선치료를 위한 아날로그영상기반의 시뮬레이터와 의료용 선형가속기로 이루어진 시스템을 X-ray 필름을 Computed Radiography (CR)로 교체하여 디지털영상기반의 시스템으로 개선하였다. 장비교체를 최소화하였고 기존의 치료과정과 유사하도록 하여 사용자들이 짧은 시간에 적응할 수 있도록 하였다. 필름카세트와 필름현상기는 CR카세트와 CR리더기로 대신하였고, ViewBox는 소형PC와 모니터로 대체되었다. 디지털영상의 장점을 충분히 활용하기 위해 방사선종양학과에 적합한 Viewer 소프트웨어를 개발하여 업무의 편리성과 효율성을 도모하였다. Viewer 소프트웨어는 2개의 이미지를 동시에 볼 수 있으며, 이들 영상의 비교도 가능하다. 다양한 검색기능과 Contouring 기능, 윈도우폭/레벨 조절기능을 갖추었다. 업무의 중단이 없도록 하기 위해 1주일간 기존 필름과 CR을 공동으로 운용하며 문제점을 수정한 후 필름시스템을 제거하고 CR시스템을 운용하였다. CR시스템은 안정적으로 운용되고 있으며, 본격적으로 CR시스템이 이용되면서 사용자로부터 제기되는 여러 요구사항을 반영하여 기능을 개선하였다.
김동영(Dong Yeong Kim),조규원(Gyu-Won Cho),김규탁(Gyu-Tak Kim) 대한전기학회 2013 대한전기학회 학술대회 논문집 Vol.2013 No.10
본 논문에서는 매입형 영구자석 동기전동기(IPMSM : Interior Permanent Magnet Synchronous Motor)의 효율 개선 설계를 수행하였다. 효율 개선 설계를 위해 공간고조파법을 이용하여 영구자석의 폭을 선정하였다. 고정자와 회전자의 형상 설계를 통해 역기전력이 증가 하였고, 동일출력대비 동손 저감을 통해 IPMSM의 효율을 향상시켰다. 효율 향상 모델의 구동토크 및 전동기의 제반 특성을 유한요소해석을 통하여 검증하였다.
폴리아민 나노 복합체를 이용한 고분자-실리카 복합체 입자 합성
김동영(Dong-Yeong Kim),서준희(Jun-Hee Seo),이병진(Byungjin Lee),강경구(Kyoung-Ku Kang),이창수(Chang-Soo Lee) 한국청정기술학회 2021 청정기술 Vol.27 No.2
본 연구는 무기 실리카 껍질(shell)과 유기 고분자 코어(core)로 구성된 매우 균일한 유-무기 복합체 입자 제조의 방법에 관한 것이다. 먼저, 미세유체 기술을 이용하여 균일한 크기를 지니는 유기 고분자 코어 입자를 제조하였다. 코어 입자의 제조 과정에서 코어 입자의 제조 과정에서 광 경화성 유기 물질이 포함된 분산상과 연속상의 유속을 독립적으로 제어함으로써 균일한 액적을 형성하였다. 액적이 형성됨과 동시에, 미세유체 채널의 말단에서 자외선 조사에 의해 액적이 광중합 되어 코어 입자로 형성된다. 더불어, 폴리알릴아민 하이드로클로라이드(polyallylamine hydrochloride, PAH)와 인산 이온(phosphate ion)으로 구성된 나노 복합체는 최적화된 pH 조건에서 수소결합과 정전기적 인력 같은 강력한 상호작용을 통해 코어 입자에 코팅된다. 폴리아민 나노 복합체에 존재하는 PAH 주쇄의 아민 그룹들은 규산(silicic acid)의 축합(condensation) 반응을 촉매하여, 코어입자 표면의 실리카 나노입자 성장을 시킬 수 있었다. 따라서, 본 방법을 통해 유기 코어에 무기 실리카 나노입자로 코팅된 유-무기 복합체 입자를 제조할 수 있었다. 최종적으로, 본 연구에서 제시한 방법은 보다 온화하며 환경친화적인 조건 하에서 단시간 내에 유-무기 복합체 입자를 합성할 수 있으며, 다양한 모양과 크기를 갖는 코어 입자에 적용되어 넓게 활용될 수 있다. This study demonstrates a new method for the synthesis of organic-inorganic hybrid particles composed of an inorganic silica shell and organic core particles. The organic core particles are prepared with a uniform size using droplet-based microfluidic technology. In the process of preparing the organic core particles, uniform droplets are generated by independently controlling the flow rates of the dispersed phase containing photocurable resins and the continuous phase. After the generation of droplets in a microfluidic device, the droplets are photo-polymerized as particles by ultraviolet irradiation at the ends of microfluidic channels. The core particle is coated with a nano complex composed of polyallylamine hydrochloride (PAH) and phosphate ion (Pi) through strong non-covalent interactions such as hydrogen bonding and electrostatic interaction under optimized pH conditions. The polyamine nano complex rapidly induces the condensation reaction of silicic acid through the arranged amine groups of the main chain of PAH. Therefore, this method enabled the preparation of organic-inorganic hybrid particles coated with inorganic silica nanoparticles on the organic core. Finally, we demonstrated the synthesis of organic-inorganic hybrid particles in a short time under ambient and environmentally friendly conditions, and this is applicable to the production of organic-inorganic hybrid particles having various sizes and shapes.