http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유연·신축성 전자 소자 개발을 위한 은 나노와이어 기반 투명전극 기술
김대곤,김영민,김종웅,Kim, Dae-Gon,Kim, Youngmin,Kim, Jong-Woong 한국마이크로전자및패키징학회 2015 마이크로전자 및 패키징학회지 Vol.22 No.1
Recently, advances in nano-material researches have opened the door for various transparent conductive materials, which include carbon nanotube, graphene, Ag and Cu nanowire, and printable metal grids. Among them, Ag nanowires are particularly interesting to synthesize because bulk Ag exhibits the highest electrical conductivity among all metals. Here we reviewed recently-published research works introducing various devices from organic light emitting diode to tactile sensing devices, all of which are employing AgNW for a conducting material. They proposed methods to enhance the stretchability and reversibility of the transparent electrodes, and apply them to make various flexible and stretchable electronics. It is expected that Ag nanowires are applicable to a wide range of high-performance, low-cost, stretchable electronic devices.
SWAT 및 HEC-RAS모형을 활용한 유역 내 토사수지분석기법
김대곤,정태성,류권규,Kim. Dae Gon,Cheong. Tae Sung,Yu. Kwon Kyu 한국방재학회 2012 한국방재학회논문집 Vol.12 No.6
하천내에서 각종 사업을 시행하면, 그로 인해 하천에서는 토사유출, 하상 저하에 따른 인공 구조물의 기초부 손상, 댐 저수지에서의 퇴적, 해안 침식 등과 같은 토사이동에 관련된 문제가 발생하게 된다. 이러한 토사의 유출-거동을 종합적으로 파악하는 것이 토사수지분석이다. 본 연구는 유역유출 모형과 하상변동 예측 모형을 이용하여 토사수지분석을 위한 새로운 방법을 제안하였다. 낙동강 주요 지류 중 하나이며 영주댐 건설이 계획된 대표적인 충적하천유역인 내성천에 모형을 적용하고 모형의 검정과 적용성 검토를 수행하였다. 모의결과 모형은 자연하천에서의 토사유출-거동을 잘 재현하는 것으로 나타났다. 특히, 모형은 내성천에서 실측한 유사량과 유사한 계산결과를 보이는 것으로 나타났다. 내성천 유역의 토사수지 분석결과 총 1,704만톤의 토사손실이 발생한 것으로 나타났으며 이들은 대부분 하도침식에 의한 것으로 추정된다. 제안된 방법은 자연하천에서 토사수지분석이나 토사이동 관련 재해위험도저감에 활용될 수 있을 것이다. Various river projects have caused sediment transport relate problems such as sediment yields, foundation damages of river facilities by riverbed degradation, siltation on reservoir and erosion in coast. To understand comprehensively these behaviors related on sediment erosion, transport and yields from inflows to outflows in river watershed, usually, the sediment budget analysis is used. This study propose a new sediment budget analysis method using both sediment transport models of the watershed runoff model and riverbed fluctuation model. To calibrate and validate the model, the method is applied in the Naeseong-cheon which typical alluvial river is one of the main tributaries of the Nakdong river and Yeong-ju dam is planned to be built. The results show that proposed sediment budget analysis method represents well sediment transports in the natural river watershed. Specifically, sediment loads calculated by the method is fit well to the measured sediment loads in the Naeseong-cheon watershed. The sediment budget analysis results show that the soil loss of 17,040,000 tons due to erosion in many parts of river bed is estimated in the Naeseong-cheon. The suggested method can be used for sediment budget analysis and sediment related disaster risk reduction in the natural streams.
면진장치 들림 효과를 고려한 면진된 골조의 구조 거동 평가
김대곤,Kim, Dae-Kon 한국공간구조학회 2010 한국공간구조학회지 Vol.10 No.2
적층고무 면진장치의 전단강성 뿐만 아니라 인장강성 및 압축강성을 실험적으로 구한 후 비선형 해석 프로그램을 이용하여 면진장치를 모델링 하였다. 수평력을 받는 면진된 골조의 면진장치에 전도에 의한 인장응력이 발생되게 하기 위하여 큰 초기변위를 부여한 자유진동 실험을 해석적으로 수행하였다. 적층고무 면진장치는 인장에 약하기 때문에 면진장치에서의 들림 현상을 해석적으로 구하기 위하여 면진장치의 수직방향 강성들이 해석 모델에 적절히 반영되어야 한다. After obtaining tensile and compressive stiffness as well as shear stiffness of elastomeric seismic isolator experimentally, those stiffness were modeled analytically using nonlinear computer program. To induce tensile stress due to overturning in the seismic isolators of an isolated frame for horizontal force, free vibration simulations generated by large initial displacement were conducted. Since elastomeric seismic isolator is weak for tensile stress, the axial stiffness of isolators shall be included properly in the analytical model to evaluate the uplift phenomenon of elastomeric seismic isolator.
김대곤,Kim, Dae-Kon 한국공간구조학회 2011 한국공간구조학회지 Vol.11 No.1
중진 지역에 있는 RC 골조의 횡하중에 대한 설계에서 저층부에 있는 보와 기둥의 강도는 상층부의 강도보다 커야만 한다. 그러나 횡하중에 대한 보의 설계 모멘트를 골조의 수평방향뿐만 아니라 수직방향으로 재분배 시킬 수 있고 그 결과 모든 보의 강도를 같게 할 수 있다. 본 논문은 최대한 많은 층의 보 휨 강도를 동일하게 만들기 위한 수직방향 보 모멘트 재분배의 영향을 살펴보는데 있다. 2경간-6층 RC 골조를 수직방향 모멘트 재분배를 고려한 경우와 고려치 않은 경우로 각각 설계하고 이들의 내진성능을 정적 비선형 한계하중 해석법과 동적 비선형 시간이력 해석법을 이용하여 구하였다. 해석결과 수직방향으로 보의 모멘트를 재분배하면 재분배 한 크기만큼 증가된 연성도를 요구하지만, 이 추가적인 요구는 상세설계가 잘된 RC 부재의 연성도 능력보다 작다. For the lateral load resistance of a RC frame in a medium risk seismic zone, the strength of lower story beams and columns should be larger than those of the upper stories. However, the lateral loads can be accommodated by redistributing design beam moments vertically as well as horizontally so all beams end up with identical strengths. This paper looks at the impact of the vertical redistribution of beam moments to provide identical beam strength over as many floors as possible. Two-bay six-story RC frame was designed with and without vertical beam moment redistribution and its seismic performance were evaluated by using push-over limit analysis and by non-linear time history dynamic analysis. Analytical results show that with the use of vertical beam moment redistribution the increase in the ductility demand is similar to the proportion of moment redistribution applied, but this additional demand is below the ductility capacity of well detailed RC members.
김대곤,Kim, Dae-Gon 대한기계학회 2001 大韓機械學會論文集A Vol.25 No.12
The control algorithm of a new type self-bearing step motor is presented. The motor actuator is used for both motor and bearing functionality without any redundant coil windings or redundant electromagnets. The self$.$bearing step motor layout and its control method are described. A linearized farce-current-displacement relationship is derived. As the result of the unbalance response approach, the constant torque production is possible fur the supply current regulation algorithm. And even if the bearing functionality is added in the motor functionality, no additional current for bearing functionality is possible, and this leads to minimize the net power loss. Also, the unbalance response shows the independent bearing force and motor torque.