http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고명준,이영학,김민숙,박종일,김희철,Ko, Myung Joon,Lee, Young Hak,Kim, Min Sook,Park, Jong Yil,Kim, Heecheul 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.6
본 논문은 유공형 판 형태로 전단보강한 넓은 보의 전단파괴 실험을 수행하여 넓은 보의 거동을 평가하였다. 무보강 시험체, 유공형 강판으로 전단보강된 시험체 5개와 유공형 GFRP로 보강된 시험체 5개 총 11개의 시험체를 전단파괴 실험을 통해 계측한 전단강도와 ACI-318 규준의 설계식을 통해 얻은 전단강도와 비교 평가하였다. 또한 넓은 보의 전단보강재의 재료, 종방향 전단보강재의 간격과 횡방향 전단보강재의 간격을 변수로 하여 넓은 보의 거동과 전단강도에 미치는 영향을 분석하였다. 이를 통해 종방향과 횡방향 전단보강재 간격이 줄어들수록 전단강도가 증가하고 사인장 균열이 적게 발생하는 것을 확인하였다. 또한 전단보강재의 재료인 강재와 GFRP에 상관없이 전단보강량이 동일하다면 넓은 보에서 비슷한 전단보강효과를 보이는 것을 확인하였다. In this paper, shear behavior of concrete wide beam reinforced with plates with openings was evaluated. For this evaluation, evelen specimens were manufactured. One specimen was non-shear reinforced, five specimens were reinforced with steel plates and the other five specimens were reinforced GFRP plates. Shear strengths measured through experiments were compared with ones calculated from the equation provided by ACI 318. Longitudinal spacing of shear reinforcement, transverse spacing of shear reinforcement and shear reinforcement material were considered as variables. Test results showed that the shear strength increased as the transverse and longitudinal spacing of shear reinforcement became narrow. Also, regardless of material type of shear reinforcement, the shear capacity was similar when the amount of shear reinforcement was the same.
플렉서블 기판의 레이저 투과 용접 및 기계적 특성 평가
고명준,손민정,김민수,나지후,주병권,박영배,이태익 한국마이크로전자및패키징학회 2022 마이크로전자 및 패키징학회지 Vol.29 No.2
In order to improve the mechanical reliability of next-generation electronic devices including flexible, wearable devices, a high level of mechanical reliability is required at various flexible joints. Organic adhesive materials such as epoxy for bonding existing polymer substrates inevitably have an increase in the thickness of the joint and involve problems of thermodynamic damage due to repeated deformation and high temperature hardening. Therefore, it is required to develop a low-temperature bonding process to minimize the thickness of the joint and prevent thermal damage for flexible bonding. This study developed flexible laser transmission welding (f-LTW) that allows bonding of flexible substrates with flexibility, robustness, and low thermal damage. Carbon nanotube (CNT) is thin-film coated on a flexible substrate to reduce the thickness of the joint, and a local melt bonding process on the surface of a polymer substrate by heating a CNT dispersion beam laser has been developed. The laser process conditions were constructed to minimize the thermal damage of the substrate and the mechanism of forming a CNT junction with the polymer substrate. In addition, lap shear adhesion test, peel test, and repeated bending experiment were conducted to evaluate the strength and flexibility of the flexible bonding joint. 플렉서블, 웨어러블 디바이스 등을 포함한 차세대 전자 기기의 기계적 신뢰성 향상을 위하여 다양한 유연 접합부에서 높은 수준의 기계적 신뢰성이 요구되고 있다. 기존 고분자 기판 접합을 위한 에폭시 등의 유기 접착소재는 접합부 두께 증가가 필연적이며, 반복 변형, 고온 경화에 의한 열기계적 파손 문제를 수반한다. 따라서 유연 접합을 위해서접합부 두께를 최소화하고 열 손상을 방지하기 위한 저온 접합 공정 개발이 요구된다. 본 연구에서는 플렉서블 기판의 유연, 강건, 저 열 손상 접합이 가능한 플렉서블 레이저 투과 용접(flexible laser transmission welding, f-LTW)를 개발하였다. 유연 기판 위 탄소나노튜브(carbon nanotube, CNT)를 박막 코팅하여 접합부 두께를 줄였으며, CNT 분산 빔 레이저가열을 통한 고분자 기판 표면의 국부적 용융 접합 공정이 개발되었다. 짧은 접합 공정 시간과 기판의 열 손상을 최소화하는 레이저 공정 조건을 구축하였으며 고분자 기판과 CNT 접합 형성 메커니즘을 분석하였다. 또한 접합부의 강건성 및유연성 평가를 위해 인장강도 시험, 박리 시험과 반복 굽힘 시험을 진행하였다.
고명준,Ko, Myoungjun 한국군사과학기술학회 2021 한국군사과학기술학회지 Vol.24 No.2
In this paper, we studied a method of wirelessly checking up the POD for captive flight tests which is performed during the development of guided weapons systems. The wireless power transfer module, the power distribution device, and the battery pack were designed to wirelessly power the captive flight test POD, and the communication device was designed to enable wireless communication between the POD and the check-up device. The communication device was designed to enable WiFi, IR communication, and laser diode communication, so that various communication methods could be tested. Through the performance test, it was confirmed that power was stably supplied to the captive flight test POD, and the wireless communication performance was verified by measuring the delay time and error rate. As a result, by using our system the POD check-up for the captive flight test was performed wirelessly and the data of the captive equipment could be obtained effectively.
고명준(Myung-Jun Ko),V. Patrangenaru(Vlad Patrangenaru),홍성욱(Seong-Wook Hong),이득우(Deug-Woo Lee) 한국생산제조학회 2005 한국공작기계학회 추계학술대회논문집 Vol.2005 No.-
This paper introduces a couple of surface matching algorithms that can be used to reconstruct the surface topography of an object scanned of by an AFM. These image matching techniques are applied to two neighboring images intentionally overlapped with each other. To enhance the performance, this paper compare two algorithms using the correlation coefficient and the sum of the squared differences. To compensate for the inaccuracy of the coarse stage implemented to AFM, all the six axes including the rotational degrees of freedom are successively matched to maximize the coefficient defined. The results show that the proposed algorithms are useful for measurement range extension of AFM. The results also show that a combined use of the two indices is beneficial for practical cases.