http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손현철(Hyun-Chul Shon),최의성(Eui-Sung Choi),김용민(Yong-Min Kim),김동수(Dong-Soo Kim),박경진(Kyoung-Jin Park),조병기(Byung-Ki Cho),박지강(Ji-Kang Park),김석원(Seok-Won Kim) 대한정형외과학회 2012 대한정형외과학회지 Vol.47 No.6
목적: 슬관절 전치환술 중에 관찰되는 그랜드피아노 징후와 컴퓨터단층촬영에서 측정된 임상적 대퇴 상과간 축과 대퇴 후과간 축이 이루는 각을 분석하여 한국인에서 적절한 대퇴삽입물 회전정렬의 기준을 알아보고자 하였다. 대상 및 방법: 슬관절 전치환술을 시행한 24명, 30예를 대상으로 대퇴 후과간 축에 3o 외회전되도록 전방 절제를 시행하고 그랜드피아노 징후의 형태와 3o 외회전 전방 절제와의 관계를 알아보고, 술 후에 시행한 컴퓨터단층촬영에서 측정된 임상적 대퇴 상과간 축과 대퇴 후과간 축과의 연관성을 분석하였다. 또한 28명, 41예를 대상으로 술 전 컴퓨터단층촬영을 실시하여 한국인에서 임상적 대퇴 상과간 축과 대퇴 후과간 축이 이루는 각의 정상 범위를 알아보았다. 결과: 대퇴 후과간 축으로부터 3o 외회전 전방 절제 후 나타나는 그랜드피아노 징후의 형태는 술 후 컴퓨터단층촬영에서 측정된 임상적 대퇴 상과간 축과 대퇴 후과간 축의 차이와 유의한 연관성을 보였다. 술 전 컴퓨터단층촬영에서 측정된 임상적 대퇴 상과간 축과 대퇴 후과간 축이 이루는 각은 평균 6.01o (범위 3.90-7.86o)로 나타났다. 결론: 한국인에서는 임상적 대퇴 상과간 축과 대퇴 후과간 축의 관계가 서양인보다 외회전 정도가 크므로, 이론적으로는 대퇴삽입물의 회전정렬이 현재보다 외회전되도록 하는 것이 바람직하며, 그랜드피아노 징후가 대퇴삽입물의 회전정렬과 연관성이 있음을 실제 계측과 컴퓨터단층촬영을 통하여 확인할 수 있었다. Purpose: We aimed to obtain a reference for the optimal rotational alignment of femoral component in Koreans through an analysis of grand piano sign observed during total knee arthroplasty (TKA) and the angle between the clinical transepicondylar axis and the posterior condylar axis (TEA-PCA angle), by computed tomography. Materials and Methods: The study subjects included 24 patients (30 cases), who underwent the anterior femoral resection, which was applied at an external rotation 3o relative to the posterior condylar axis during TKA. The relationship between anterior femoral resection with external rotation of 3o and the morphological pattern of Grand piano sign was evaluated. On postoperative computed tomography images, we evaluated the relationship between the clinical transepicondylar axis, posterior condylar axis of femoral component and grand piano sign. Moreover, a total of 28 Korean patients with 41 arthritic knees scheduled for a TKA had a preoperative computed tomography. We measured the TEA-PCA angle to evaluate the normal range in Korean subjects. Results: The morphological pattern of grand piano sign observed after the anterior femoral resection, which was applied at an external rotation 3o, showed statistically significant correlation with TEA-PCA angle. On preoperative computed tomography images, the TEA-PCA angle was 6.01 degrees (range from 3.90 to 7.86). Conclusion: The TEA-PCA angle of Koreans was different from that of the westerners. More external rotation was needed for the optimal femoral rotational alignment theoretically, and we could confirm the correlation between Grand piano sign and rotational alignment of femoral component by measurement of grand piano sign and computed tomography.
가진 펌프에 연결된 곡관덕트에서 난류진동유동의 전단응력분포와 압력분포
손현철,이홍구,이행남,박길문,Sohn, Hyun-Chull,Lee, Hong-Gu,Lee, Haeng-Nam,Park, Gil-Moon 한국유체기계학회 2001 한국유체기계학회 논문집 Vol.4 No.4
In the present study, flow characteristics of turbulent oscillatory flow in an oscillator connected to square-sectional $180^{\circ}$ curved duct are investigated experimentally. In order to investigate wall shear stress and pressure distributions, the experimental studies for air flows we conducted in a square-sectional $180^{\circ}$ curved duct by using the LDV system with the data acquisitions and the processing system. The wall shear stress at bend angle of the $150^{\circ}$ and pressure distribution of the inlet (${\phi}=0^{\circ}$) to the outlet (${\phi}=180^{\circ}$) by $10^{\circ}$ intervals of the duct are measured. The results obtained from the experiment are summarized as follows : wall shear stress values in the inner wall we larger than those in an outer wall, except for the phase angle (${\omega}t/{\pi}/6$) of 3, because of the intensity of secondary flow. The pressure distributions are the largest in accelerating and decelerating regions at the bend angle(${\phi}$) of $90^{\circ}$ and pressure difference of inner and outer walls is the largest before and after the ${\phi}=90^{\circ}$.
Effect of Working Pressure on Anode Characteristics of Tin Oxide Thin Films
손현철,문희수,성상현,박종완,Son, Hyeon-Cheol,Mun, Hui-Su,Seong, Sang-Hyeon,Park, Jong-Wan Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.1
본 실험에서는 리튬 이차 박막전지의 음극물질로 주석 산화물 박막을 RF magnetron sputter을 이용하여 증착하였다. RF power를 2.5w/$\textrm{cm}^{2}$로 고정시키고, 공정압력을 5mtorr에서 30mtorr까지 변화시키면서 막의 결정성 및 응력 변화, 굴절률 등을 측정하여 주석 산화물 박막의 음극 특성을 조사하였다. 분석한 결과, 압력이 증가함에 따라 증착 속도는 $125{\AA}$/min에서 $58{\AA}$/min까지 감소하였으며, 결정 구조는 (110)면에서 (101)면과 (211)면으로 천이됨을 보였다. 또한 막응력은 공정압력 20mtorr를 기준으로 압축응력에서 인장응력으로 바뀌었고, 굴절률도 1.93에서 1.79로 감소하였다. 공정압력변화에 따른 충방 전 시험결과 공정압력 5mtorr에서 가장 큰 가역적 용량($483.91\mu\textrm{Ah}/\textrm{cm}^{2}-\mu\textrm{m}$을 보였으나, 사이클이 진행될수록 사이클 퇴화가 점차 증가하였고, 10mtorr에서는 가역적 용량 및 사이클 특성 모두 좋은 것으로 나타났다. 이는 공정 압력이 감소함에 따라 막의 밀도의 증가로 전기 화학적으로 반응할 수 있는 활물질의 양이 증가한 것으로 생각되며 또한, 사이클 특성은 막응력에 의해 크게 영향을 받는다고 생각된다. Tin oxide films as an anode layer for microbatteries were deposited by using rf magnetron sputtering. Characterization of the films was carried out in terms of working pressure in the range of 5~30 mtorr. Rf power and substrate temperature during deposition were fixed at 2.5W/$\textrm{cm}^2$ and A.T., respectively. The crystal orientation of $SnO_2$films was changed from (110) to (101) or (211) with the increasing working pressure. Refractive index and film density of the films also decreased with the increasing working pressure. The $SnO_2$ thin film formed under optimum conditions was found to have a reversible capacity of 446.9$\mu$Ah/$\textrm{cm}^2$-$\mu\textrm{m}$ and good reversibility when the working pressure was fixed at 10mtorr. As the working pressure decreased, film density increased. It was thought that the capacity of $SnO_2$films increased due to the increase in the amount of active materials which can react with Li electrochemically. Furthermore, cycle characteristics of the anode material was also influenced by film stress.