권역심뇌혈관질환센터 사업의 비용-편익 분석

김병호 ( Byung Ho Kim ),감신 ( Sin Kam ),배상근 ( Sang Geun Bae ),김건엽 ( Keon-yeop Kim ),이원기 ( Won Kee Lee ),홍남수 ( Nam-soo Hong ),박형근 ( Hyeung-keun Park ),이혜진 ( Heyjean Lee ),조은정 ( Eun-jung Cho ),채성철 ( Shung C 한국보건정보통계학회(구 한국보건통계학회) 2017 보건정보통계학회지 Vol.42 No.1

Objectives: This study was conducted to investigate economic feasibility of operating Regional Cardiocerebrovascular Centers using cost-benefit analysis. Methods: The current study assessed cost and benefit data collected from nine hospitals which were designated as Regional Cardiocerebrovascular Centers between 2008 and 2010. Results: The operation of Regional Cardiocerebrovascular Centers reduced mortality rate and length of stay due to acute myocardial infarction and stroke and also decreased disability occurred after stroke. The total calculated cost of operating nine Regional Cardiocerebrovascular Centers was 19.85-22.30 billion won and the minimum benefit calculated was 23.98 billion won. Applying the maximum cost and the minimum benefit, the net benefit was 1.68 billion won, which is estimated to 190 million won per Regional Cardiocerebrovascular Center. Conclusions: The present study revealed that the operation of Regional Cardiocerebrovascular Centers was economically beneficial. The benefit would be larger if intangible benefit such as the long-term effects to community hospitals and enhancement of quality of life of patients and their families are considered.

Alumina Core와 Lithium Disilicate Core의 압축강도 변화에 관한 연구

이기대,김주원 대구보건대학 2005 대구보건대학 論文集 Vol.25 No.-

The purpose of this study is to provide efficient results on compressive strength of Alumina core and Lithium Disilicate core in oral conditions. A data for the study comes from experiments; compressive strength by universal tension machine(M-4465, Instron Co., U.S.A). The results are summarized as follows; Compressive stresses set up during the cooling of the sintered porcelain veneer will also play a part in improving the bond strength. Ceramo-metallic systems are deliberately designed with a very small degree of thermal mismatch in order to leave the porcelain in a stage of compression. It is important to note that the high expansion porcelains used in metal-ceramics have an increased tendency to devitrify because of their Alkali content.

Study on a Dynamic master system for Controller Area Network

Won,Ji-Woon,Hong,Won-Kee,Lee,Yong-Doo 한국정보기술응용학회 2005 한국정보기술응용학회학술대회 Vol.2005 No.1

β-CuZn 합금의 항복강도 이상거동에 미치는 변형률 속도와 온도의 영향

이기안,장영원,이종수 대한금속재료학회 2003 대한금속·재료학회지 Vol.41 No.3

A series of tensile and load relaxation behaviors in B2 type β-CuZn alloy have been examined to clarify the strain rate & the temperature dependence of yield stress anomaly. It has been found in tensile tests that the region showing anomalous peak of yield stress moves to a higher stress and higher temperature region with increasing strain rate. The anomalous yielding region below peak temperature(T_p) revealed slightly positive strain rate dependence, while the region above T_p showed considerably positive strain rate dependence. The slip lines formed below peak temperatures (T_P) were clearly visible with naked eye(coarse slip lines), and became finer near T_p(fine slip lines), while they disappeared completely above T_p. Based on the different tendency of temperature and strain rate dependence of anomalous yielding as the above-mentioned results, two types of deformation modes were suggested and incorporated into the flow curve analysis, which was in accord well with the experimental results. The slightly positive strain rate dependence of yield stress anomaly indicated that the yield stress anomaly in β-CuZn alloy mainly seemed to be attributed to the vacancy hardening.

염산 독세핀 외용제의 피부 전달 시스템을 위한 제제 설계 및 평가

이은미,김정수,경기열,이계원,지웅길 忠南大學校 生命科學硏究院 醫藥品開發硏究所 2006 藥學論文集 Vol.21 No.-

Doxepin hydrochloride(Dox) is a dibenzoxepin-derivative tricyclic antidepressant and used topically for the short-term relief of moderately severe pruritus associated with atopy dermatitis. Dox topical emulsion(or liposome) formulations were evaluated with respect to their rheological properities, permeation through excised skin of hairless mouse and in vitro/in vivo accumulation in the skin. The apparent viscosity was increased according to the concentration of glycerin and decreased with an increase in the concentration of phosphatidylcholine(PC). The permeation rate of formulation increased with a high concentration of PC and showed no relationship with the change of formulations. Amount of accumulated drug in the excised skin of hairless mouse was decreased with a high concentration of glycerin, but increased according to PC concentration.

HPV에 감염된 자궁경부 상피세포의 Keratin 아형 변화에 관한 연구

기근홍,이영미,장원재,임용,임성철,김창원,전호종 조선대학교 1994 The Medical Journal of Chosun University Vol.19 No.2

The human papillomavirus (HPV) are wide spread in the world, causing proliferation of epidermal and mucosal surface. Certain papillomaviral types are oncogenic in vivo and in vitro. HPV DNA has been detected in most of cervical lesions such as condyloma acuminata, dysplasias, and invasive carcinomas. The materials for this study consisted of 5 dysplasias. 5 squamous cell carcinomas, and 5 exocervix for control, that resected for definite treatment of uterine disease at Chosen University Hospital from January, 1991 to December, 1993. All cases were performed of in situ hybridization for HPV DNA type 6/11, 16, and 18. And also immununohistochemical stain for panel of monoclonal cytokeratin (CK) antibodies were done. The result obtained is as fallows : 1. HPV DNA type 6/11 are detected in all dysplasias. HPV DNA type 16 and 18 are detected in squamous cell carcinomas. 2. Stratifed squamous epithelium of exocervix are positive staining for CK 1, CK 5/6, CK 8, CK 13, CK 14, and CK 19. HPV DNA type 6/11 infected cells are positive for CK 1, CK 13, CK 14, CK 17, CK 18, and CK 19. HPV DNA type 16/18 infected cells are positive for CK 1, CK 5/6, CK 10, CK 13, CK 14, CK 17, CK 18, and CK 19. In conclusion, HPV infection of uterine cervix is associated with change of normal cytokeratin expression pattern. Dysplastic cells are changed of CK 5/6, CK 8, CK 17 and CK18. Squamous cell carcinoma cells are changed of CK 8, CK 17, and CK 18.

알루미늄 연속주조 용탕의 탈 가스 일체화 장치 개발

이용중,김태원,김기대,류재엽,이형우 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle, pollution due to the producing a lot of toxic gases like chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals, loss of metals, and decreasing the life of refractory materials. In order to solve these problems, this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the existing methods and prevented environmental pollution with smokeless, odorless, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition, the amount of the produced sludge can also be reduced by 60~80% maximum compared with the existing methods. Then, it makes it possible to minimize the loss of metals. Moreover, the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevention effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition, it can protect the blending of precipitation impurities. Because it has a monolithic configuration, it can avoid the use of additional energy to compensate the temperature decreasing about 60? that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

급성 일산화탄소 중독 및 회복기의 흰쥐 전립선 Acid phosphatase 활성도의 변화

배기원,유진화,이흥식 대한해부학회 1976 Anatomy & Cell Biology Vol.9 No.2

毛澤東의 軍事思想 小考

李基遠 동국대학교 행정대학원 1975 행정논집 Vol.6 No.-

일산화탄소 중독이 생쥐 신장의 Alkaline phosphatase 활성에 미치는 영향

이홍식,배기원 보건장학회 1975 보건장학회보연구논문집 Vol.4 No.-