Numerical simulations and surrogate-based optimization of cavitation performance for an aviation fuel pump

Xing’an Zhao,Biao Huang,Tairan Chen,Guoyu Wang,Deming Gao,Jing Zhao 대한기계학회 2017 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.31 No.2

We used computational modeling to investigate the cavitation performance of an aviation fuel pump, and optimize structural parameters using the surrogate-based method. In the numerical simulation, a rotation-curvature correction was adapted to the k-ε turbulence model, and a four-component surrogate fuel was selected to reproduce the physical properties of the China RP-3 kerosene. Then the performance of the aviation fuel pump was predicted. In the optimization, based on the series of the numerical results, Surrogate-based analysis and optimization (SBAO) was used to optimize the structural parameters of the fuel pump (the variation of the outlet blade angle for the inducer △β b1 and the variation of the inlet blade angle for the impeller △β b2 ). The results show that the prediction of cavitation performance agrees well with the experimental data. The results show that cavitation areas are mainly distributed in the inlet of the inducer. The volume of cavities grows with the decreasing NPSHa. The head of the fuel pump has a sudden head-drop when NPSHa ≤ 5.64 m. Furthermore, the surrogate-based approach is available in structural optimization of the fuel pump. The cavitation performance of the optimized pump improved about 22 % with a little drop of head coefficient when △β b1 = 4.33° and △β b2 = 3.24°. The numerical approach employed in this paper can accurately predict the cavitating flow of the high rotating speed fuel pump and the surrogate-based method is available in the structural optimization for a better cavitation performance.

A novel design method for improving collapse resistances of multi-story steel frames with unequal spans using steel braces

Zheng Tan,Wei-hui Zhong,Bao Meng,Shi-chao Duan,Hong-chen Wang3,Xing-You Yao,Yu-hui Zheng 국제구조공학회 2023 Steel and Composite Structures, An International J Vol.47 No.2

The bearing capacities resisted by the two-bay beams of multi-story planar frames with unequal spans under column removal scenarios differ considerably owing to the asymmetric stress on the left and right beams connected to the failed column and cause the potential for beams with larger span-to-depth ratios to be unable to exert effectively, which is disadvantageous for resisting the vertical load in unequal-span frame structures. To address this problem, the structural measure of adding braces to the weak bays of multi-story unequal-span frames was proposed, with the objective of achieving a coordinated stress state in two-bay beams with unequal spans, thereby improving the collapse resistance of unequal-span frame structures. Before conducting the numerical simulation, the modeling methods were verified by previous experimental results of two multi-story planar frames with and without steel braces. Thereafter, the effects of the tensile and compressive braces on the collapse behavior of the frame structures were elucidated. Then, based on the mechanical action laws of the braces throughout the collapse process, a detailed design method for improving the collapse resistance of unequal-span frame structures was proposed. Finally, the proposed design method was verified by using sufficient example models, and the results demonstrated that the design method has good application prospects and high practical value.

Recommendations on management of gynecological malignancies during the COVID-19 pandemic: perspectives from Chinese gynecological oncologists

Yingmei Wang,Shiqian Zhang,Lihui Wei,Zhongqiu Lin,Xinyu Wang,Jianliu Wang,Keqin Hua,Manhua Cu,Jiandong Wang,Shixuan Wang,Wen Di,Yudong Wang,Ruifang An,Mingrong Xi,Ruixia Guo,Qi Zhou,Xing Xie,Fengxia X 대한부인종양학회 2020 Journal of Gynecologic Oncology Vol.31 No.4

The outbreak of coronavirus disease 2019 (COVID-19) caused by the severe acute respiratorysyndrome coronavirus 2 has rapidly spread globally. Cancer patients are at a higher risk ofbeing infected with the coronavirus and are more likely to develop severe complications, ascompared to the general population. The increasing spread of COVID-19 presents challengesfor the clinical care of patients with gynecological malignancies. Concerted efforts should beput into managing gynecological malignancies in an orderly manner by strictly implementingthe measures that are specifically developed for controlling the spread of COVID-19. We havedrafted Recommendations on Management of Gynecological Malignancies during the COVID-19 Pandemicbased on our experience on controlling COVID-19 pandemic in China. We recommendthat patients with gynecological malignancies should be managed in hierarchical andindividualized manners in combination with local conditions related to COVID-19. Medicalcare decision should be balanced between controlling COVID-19 pandemic spread and timelydiagnosis and treatment for gynecologic oncology patients.

The association between couple relationship quality and sleep quality: a systematic review and meta-analysis

Xing Xing Wang,Qingxiu Lin,Ping Dong,Ya Bin Wei,Jia Jia Liu 한국간호과학회 2023 한국간호과학회 학술대회 Vol.2023 No.11

Investigation of the Structural Behaviour of RC Beam-Column Sub-frame Subjected to Progressive Collapse

Feiliang Wang,Sandeep Shah,Xiaoping Wang,Xing-Er Wang,Wang-Xi Zhang,Bo Pang,Jian Yang 대한토목학회 2022 KSCE JOURNAL OF CIVIL ENGINEERING Vol.26 No.4

The aim of this study is to investigate the effects of varying design variables on the structural behaviour of reinforced concrete (RC) sub-frames under progressive collapse. A finite element modelling approach is presented and validated against the experimental results concerning a 2D frame (3 columns and 2 beams) and a 3D frame (4 columns and 3 beams). The performance of the RC sub-frame is discussed by choosing the scenarios of the exterior, interior, and multiple column loss, respectively, and by increasing the number of stories and bays. Further studies are conducted based on the numerical method to reveal the effect of beam longitudinal reinforcement ratio (BLRR), beam section depth (BSD), and concrete compression strength (CCS). The results show that both BLRR, CCS and BSD have a significant influence on the compressive arch action (CAA) capacity of the structure under progressive collapse, and the load-carrying capacity of the RC sub-frame increases with an increasing number of stories.

Network Intrusion Prediction Model based on RBF Features Classification

Wang Xing-zhu 보안공학연구지원센터 2016 International Journal of Security and Its Applicat Vol.10 No.4

According to the relationship between feature subset and parameters of RBF neural network, in order to improve the intrusion detection accuracy, it proposed an improved particle swarm optimization neural network of network intrusion detection model. Network feature subset and parameters of RBF neural network were regarded as a particle, through collaboration and information exchange between particles to find the optimal feature subset and parameters of RBF neural network, so as to establish the optimal network intrusion detection model, and using KDD Cup 99 data sets to carry out simulation experiment. The simulation results showed that, IPSO-RBF neural network reduced the feature dimensions, and the better parameters of RBF neural network was obtained then, which is a kind of network intrusion detection model with high detection accuracy and high speed.

Increases in solar conversion efficiencies of the ZrO ₂ nanofiber-doped TiO ₂ photoelectrode for dye-sensitized solar cells

Wang, Jiao,Jin, En Mei,Park, Ju-Young,Wang, Wan Lin,Zhao, Xing Guan,Gu, Hal-Bon Springer 2012 NANOSCALE RESEARCH LETTERS Vol.7 No.1

<P>In this paper, in order to improve the efficiency of dye-sensitized solar cells, we introduced zirconia [ZrO<SUB>2</SUB>] nanofibers into a mesoporous titania [TiO<SUB>2</SUB>] photoelectrode. The photoelectrode consists of a few weight percent of ZrO<SUB>2 </SUB>nanofibers and a mesoporous TiO<SUB>2 </SUB>powder. The mixed ZrO<SUB>2 </SUB>nanofibers and the mesoporous TiO<SUB>2 </SUB>powder possessed a larger surface area than the corresponding mesoporous TiO<SUB>2 </SUB>powder. The optimum ratio of the ZrO<SUB>2 </SUB>nanofiber was 5 wt.%. The 5 wt.% ZrO<SUB>2</SUB>-mixed device could get a short-circuit photocurrent density of 15.9 mA/cm<SUP>2</SUP>, an open-circuit photovoltage of 0.69 V, a fill factor of 0.60, and a light-to-electricity conversion efficiency of 6.5% under irradiation of AM 1.5 (100 mW/cm<SUP>2</SUP>).</P>

Stathmin is a Marker of Progression and Poor Prognosis in Esophageal Carcinoma

Wang, Feng,Xuan, Xiao-Yan,Yang, Xuan,Cao, Lei,Pang, Li-Na,Zhou, Ran,Fan, Qin-Xia,Wang, Liu-Xing Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.8

Stathmin, also called oncoprotein 18, is a founding member of the family of microtubule-destabilizing proteins that play a critical role in the regulation of mitosis. At the same time stathmin has been recognized as one of responsible factors in cancer cells. The aim of this study was to assess stathmin status, its correlations with clinicopathological parameters and its role as a progosnostic marker in EC patients. The protein and mRNA levels of stathmin were examined byimmunohistochemistry (IHC) and in situ hybridization in 100EC tissues and adjacent noncancerous tissues. mRNA and protein expression of stathmin in three EC cell lines(EC9706, ECa109, EC1 commonly used in research) were also analyzed using immunocytochemistry, western blot and in situ hybridization. The prognostic value of Stathmin expression within the tumor tissues were assessed by Cox regression and Kaplan-Meier analysis. We showed that stathmin expression was significantly higher in EC tissues than in adjacent noncancerous tissues. High stathmin immunostaining score in the EC was positively correlated with tumor differentiation, Tumor invasion, Lymph node metastases, and TNM stage. In addition, we demonstrated that three EC cell lines examined, were constitutively expressing a high level of stathmin. Of those, EC-1 showed the strongest mRNA and protein expression for the stathmin analyzed. Kaplan-Meier analysis showed that significantly longer 5-year survival rate was seen in EC patients with high Stathmin expression, compared to those with low expression of Stathmin expression. Furthermore, multivariate Cox proportional hazard analyses revealed that Stathmin was an independent factors affecting the overall survival probability. In conclusion, our data provide a basis for the concept that stathmin might be associated with EC development and progression. High levels of Stathmin expression in the tumor tissues may be a good prognostic marker for patients with EC.

Improving Cellulase Production in Trichoderma koningii Through RNA Interference on ace1 Gene Expression

( Wang Shao Wen ),( Miao Xing ),( Gang Liu ),( Shao Wen Yu ),( Juan Wang ),( Sheng Li Tian ) 한국미생물 · 생명공학회 2012 Journal of microbiology and biotechnology Vol.22 No.8

Ribonucleic acid interference (RNAi) inhibits the expression of target genes in a sequence-specific manner, and shows potential for gene knockdown in filamentous fungi, in which the locus-specific gene knockout occurs in low frequency. In this study, the function of the repressor of cellulase expression I (ACEI) was verified in Trichoderma koningii (T. koningii) YC01 through RNAi, and ace1-silenced strains with improved cellulase productivity were obtained. An expression cassette that transcribed the interfering double-stranded RNA (dsRNA) of ace1 was constructed and transformed into T. koningii, and the transformants, in which the expression of ace1 was successfully silenced, were selected. As a result of the ace1 gene silencing, the expression levels of the main cellulase and xylanase genes were elevated, and the enhanced production of total proteins, cellulase, and xylanase was observed in the cultivation. In addition, the downregulation of ace1 resulted in an increasing expression of xyr1, but no clear variation in the expression of cre1, which suggested that ACEI acted as a repressor of the xyr1 transcription, but was not involved in the regulation of the cre1 expression. The results of this work indicate that ace1 is a valid target gene for enhancing enzyme production in T. koningii, and RNAi is an appropriate tool for improving the properties of industrial fungi.

Mapping of QTLs controlling content of fatty acid composition in rapeseed (Brassica napus)

Xing Ying Yan,Jia Na Li,Rui Wang,Meng Yan Jin,Li Chen,Wei Qian,Xin Na Wang,Lie Zhao Liu 한국유전학회 2011 Genes & Genomics Vol.33 No.4

The improvement of fatty acid composition is one of the major goals of breeding in rapeseed (Brassica napus). The aim of this study was to provide more information on the genetic determination of fatty acid composition by investigating quantitative trait loci (QTLs). The study was based on two-year of field trials (in 2006 and 2007) with a population of recombinant inbred lines (RILs), which originated from a cross between GH06 and P174. The level of erucic acid (C22:1) was significantly negatively correlated with those of palmitic acid (C16:0), oleic acid (C18:1), linoleic acid (C18:2), linolenic acid (C18:3), and eicosenoic acid (C20:1) in both years. A total of 40 QTLs for six fatty acids were detected and most of them were clustered on linkage groups N8, N9, and N13. These results suggested strongly that there were significant correlations between the levels of fatty acid components and would be useful for the future improvement of breeding programs focused on fatty acids in rapeseed.