관상동맥 스텐트 시술 후의 재협착에 관한 연구

김윤철,이정우,김보영,강정아,임대승,이민수,김정희,성보영,최성준,성인환,전은석 충남대학교 의과대학 지역사회의학연구소 2000 충남의대잡지 Vol.27 No.1

Coronary stent implacement is known as an effective treatment in the intimal dissection after percutaneous transluminal coronary angioplasty and the prevention of restenosis. However, In-stent restenosis still remains a major concern in clinical stenting. The stents were placed in 103 patients from July 1996 to March 1999 and performed follow-up coronary angiograms in 59(57.3%) patients. To identify the clinical, angiographic and procedurerelated variables 'which predict late restenosis within the stented artery, 59 patients(58.3±9.9, M:F= 41:18) were studied. The clinical characteristics of the patients were stable angina in 23(39.0%), unstable angina in 14(23.7%), acute myocardial infarction in 21(35.6%) and old myocardial infarction in 1(1.7%). Coronary stenting was performed in 1 patient(1.7%) for primary lesion, 50 patients(84.7%) for suboptimal results after PTCA, 6 patients(10.2%) for bail-out procedure, and 2 patients(3.4%) for restenotic lesions. All patients were treated with aspirin and ticlopidinc. The follow-up angiograms were obtained at 7±4 months. The overall in-stent restenosis rate was 27.1%. The coronary angiographic findings were 32 single vessel(54.2%), 19 two vessel(32.2%) and 8 three vessel disease(13.6%). The angiographic morphological characteristics were type A in 33(55.9%), type B in 14(23.7%), type C in 12(20. 3%) cases. Variables of 16 patients with restenosis were compared with those of 43 patients without restenosis. Previously known predictors for in-stent restenosis were multiple stenting, stenting for restenotic lesions, residual stenosis after stenting, stenting for total occlusion lesions, reference diameter, balloon to vessel ratio, acute gain and minimal luminal diameter after procedure, design and characteristics of stents, ostial lesion of aorta, high pressure method for stenting, lesion length, diabetes mellitus, size of artheroma, saphenous vein grafts, ulcerlating lesions and calcified lesions. In this study, Reference diameter before stenting(2.43±0.54mm vs. 2.88±0.65mm, p=0.016) and balloon-to-artery ratio(1.28±0.26 vs. 1.11±0.18, p=0.006) were predictors for in-stent restenosis. 1) The overall in-stent restenosis rate was 27.1%. 2) In the analysis of predictors for in-stent restenosis, there was no significant differences in clinical, angiographic factors between group with restenosis and without restenosis. But, Only reference diameter before stenting and balloon-toartery ratio were predictors of late in-stent restenosis. In conclusion, stenting is effective revascularisation method for selected patients with ischemic heart disease, and to minimize in-stent restenosis rate, stent implanting is achieved in a large vessel on the basis of an artery-to-stnet ration of 1:1, if possible.

주폐자충 폐렴으로 발현된 Felty 증후군 1예

김성호,남대근,문재현,김지홍,김보석,안진광,문태건,안병재,김성일 全南大醫大 2001 전남의대학술지 Vol.37 No.3

한국인에서 혈소판 당단백 Ⅱb/Ⅲa 유전자 다형성과 관동맥 성형술 후 재 협착과의 관계

이민수,이정우,김보영,임대승,강정아,김정희,김윤철,성보영,최성준,성인환,전은석 충남대학교 의과대학 지역사회의학연구소 2000 충남의대잡지 Vol.27 No.2

Platelet aggregation is the final pathway of acute coronary syndrome such as acute myocardial infarction and unstable angina. Platelet glycoprotein IIb/IIIa is a membrane receptor for fibrinogen and yon Willebrand factor and it plays an important role in platelet aggregation and in the pathogenesis of acute coronary syndrome. It is known that polymorphism of the gene that encoding platelet glycoprotein IIb/IIIa(PI^A1/A2) is strongly related to acute coronary syndrome in Caucasian, but not in Koreans. We investigated relationship between platelet glycoprotein llb/Illa gene polymorphism and restenosis of coronary artery after angioplasty in Koreans. Total 371 patients(M=251. F=120) were enrolled. Angioplasty group comprised 143 patients who underwent coronary angioplasty, and in the angioplasty group, restenosis group comprised with the 65 patients who had restenotic lesion over 50% of luminal diameter in follow-up coronary angiography. Normal group comprised 153 patients who had no significant angiographic lesion and variant angina group comprised 75 patients who were positive in ergonovine test. Genomic DNA was extracted from peripheral arterial blood. To determine the frequency of P1^A1/A2 genotype, polymerase chain reaction(PCR) was done and the product was restricted with Mspl. 3%. agarrose gel electrophoresis showed restriction fragment length polymorphism. Clinical profile and risk factor were also reviewed. Among all 371 patients of study group, genotype of only one patients in restenosis group if is proven to be PI^A1/A2 heterozygote. All patients of normal study group, no restenosis group, and the other patients in restenosis group have an PI^A1 homozygote genotype. In our study, platelet glycoprotein IIb/Illa polymorphism has no relationship with restenosis of the coronary artery after angioplasty in Koreans. But the genotypic frequency of platelet glycoprotein IIb/IIIa gene polymorphism in Koreans is concordant with that of previous studies.

한국땅거미 ( Atypus coreanus Kim. 1985 ) 전대그물의 화학적 정량분석

김주필,이영보,장승종,김미애 ( Joo Pil Kim,Young Bo Lee,Seong Jong Jang,Mi Ae Kim ) 한국환경생물학회 1998 환경생물 : 환경생물학회지 Vol.16 No.1

Spiders are easily distinguished from all other creatures by behavior of making webs. Among the web building spiders which depend largely on their webs to predation, Atypidae, four species in Korea, uses the purse web which is the most primitive one than other spider`s web in Korea. To analyze the chemical properties of the purse web, 30 ㎎ of Atypus coreanus` web was collected in Joan-myun, Namyangjoo-city, Kyunggi-do. As a result, the purse web of Atypus coreanus mostly consists of Glycine (5.3%), Glutamic acid (8. 26%) and Alanine (14. 17%). Especially the web of Atypus coreanus has more proportion of serine (9.28%), which plays an important role in intricacy, than that of orb webs used by Nephila clavata(4.84%) and Araneus ventricosus(4.84%).

자연의 아름다움과 고급스러움이 공존하는 마임 비에타 쇼룸 제안 -오감 (시각, 청각, 후각, 촉각, 미각)을 중심으로-

김보현,이서연,은다솜,엄연정,이진민,장미정,이성애 숙명여자대학교 산업디자인연구소 2017 숙명디자인학 연구 Vol.24 No.-

본 연구는 국내 브랜드 ‘마임'의 뷰티와 연계한 뷰티 쇼룸을 제안함에 있어서 공간속에 오감을 담아내는 일련의 프로세스를 밝히는데 목적이 있다. 이는 브랜드가 소유하고 있는 다양한 감각과 가치가 결여된 채 시각적 요소만이 담긴 브랜드 뷰티 쇼룸이 대다수를 차지하는 오늘날, 이에 대한 문제를 해결하기 위해 ’융합 연출 디자인'적 시점에서 폭넓게 바라보고 브랜드의 정신과 오감의 결합을 통해 이를 해결하고자 하였다. 이에 본 연구는 2017년 3월~6월 15주간 숙명여대 환경디자인학과 <융합연출 디자인>수업에서 진행된 수업의 결과물로서 산학 연계된 화장품 브랜드의 쇼룸디자인 개발 프로세스를 제안한다. 또한 본 연구의 범위는 오감을 담고 있는 뷰티 쇼룸(4D)이 되기까지의 과정 전체로 한다. 그 결과, 마임 뷰티쇼룸은 공간 디자인과 오감을 융합하여 영상에서 공간에 이르기까지 오감의 조화와 브랜드의 정신을 녹여내고 확장시켰다. 끝으로 본 연구는 뷰티 쇼룸 공간 디자인을 제안함에 있어서 오감을 활용하여 통합된 시점에서 그래픽·제품·공간을 개발 및 제시한 것에 의의가 있다. 또한 향후 이와 관련된 쇼룸 공간 개발에 있어서 기초 자료로 활용될 것으로 기대된다.

임플란트 hexagon 높이에 따른 임플란트와 주위 조직의 응력분포 평가

박성재,김주현,김소연,윤미정,고석민,허중보 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

PURPOSE. To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. MATERIALS AND METHODS. Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ∅4.0 mm×11.5 mm OsstemUSII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture’s external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group’s implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. RESULTS. The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2 mm, there was no significant influence on the stress distribution. CONCLUSION. For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed. 연구 목적: 본 연구는 hexagon 높이에 따른 임플란트 각 부위와 주위 지지조직의 응력분포를 3차원 유한요소 해석을 통해 평가하여 hexagon 높이가 기계적 안정성에 미치는 영향을 평가하고자 시행되었다. 연구 재료 및 방법: 외측 연결 형태의∅L4.0 mm×11.5 mm USII (Osstem Co., Pusan, Korea) 임플란트 시스템을 이용하여 하악 제 1대구치 부위에 임플란트를 식립하여 보철 수복한 경우를 연구 모델로 가정하고 임플란트 고정체의 외측 연결부인 hexagon의 높이를 각각 0.0 mm, 0.7 mm, 1.2 mm, 1.5 mm로 적용한 CAD data를 유한요소 모형화하였다. ABAQUS 6.4 (ABAQUS Inc., Providence, RI, USA)를 이용하여 산출된 응력 값 중에서 등가응력을 기준으로 각 요소(상부 치관, 지대주 나사, 고정체, 치밀골, 해면골)에서 나타나는 최대 응력 값을 비교 하였다. 결과:외측 연결을 갖는 임플란트의 hexagon의 높이는 고정체, 지대주 나사, 상부 보철물 그리고 주위 지지골에 대해 응력 분산에 영향을 주었다. Hexagon의 높이가 증가할 수록 임플란트의 응력 분산은 더 잘 이루어졌으며, 최대 응력 값의 감소를 보였다. Hexagon의 높이가 1.2 mm 이상이 되면 응력 분포에 더 이상 크게 기여하지 않았다. 결론: 외측연결을 갖는 임플란트에서 hexagon은 응력 분산에 필수적인 요소이며 그 높이가 증가할수록 더욱 효과적인 응력의 분산이 나타났다.

주기 변동 부하시 유도 전동기의 속도제어

김덕구,강경보,오성보 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.1

In this paper. we describes the speed control of induction motor by vector control using DSP TMS320F240 that has the remarkable characteristics of motor control. We use a space voltage vector PWM inverter and a PI controller that is stable of transient response characteristics in a speed controller and a current controller of d-axis and q-axis. We try computer simulation about the speed control including clock wise and counter clock wise in induction motor using direct drive system attached the arm on shaft when it works by periodic variation load. So that. we verify the validity of speed control by the experiment.

스웨징(swagging) 작업자에서 수지진동증후군 및 신경전도장애

김성아,김상우,정상재,이채용,김규상,정보우,박상규 大韓産業醫學會 2002 대한직업환경의학회지 Vol.14 No.2

목 적 : 스웨징작업자들에서 발생한 수지진동증후군 사례를 실제 진동수준 평가와 함께 보고하고, 진단시 신경전도검사의 소견에 대한 해석을 검토하고자 하였다. 방 법 : 2001년 4월과 5월에 구미소재 스웨징작업 종사자 8인을 대상으로 병력문진, 자각증상평가, 이학적 검사를 실시하고 수지진동증후군의심자 4인에대해 냉각부하검사와 신경전도검사를 실시하였다. 작업장조사는 진동측정장비들을 이용하여 실제 작업환경에서 측정후 국제표준화기구에 따라 평가하였으며, 수근관증후군의 동시 가능성을 알아보고자 인간 공학적 요인에 대해 조사평가 하였다. 6개월후인 12월에는 이들 4인에 대해 진동각검사와 싱경전도검사를 추적검사하였다. 결 과 : 진동수준은 주파수가중가속도값이 단일작업은 0.99∼10.79 m/sec^2, 2개의 복합작업은 3.03 ∼12.98 m/sec^2로서 ISO의 권고치를 초과하고 있었다. 1차 대상근로자 8인의 근무기간은 평균 8.7년(범위 0.8∼15)이었고, 1인은 당뇨병자이었다. 스톡홀름 분류에 의한 증상평가, 손톱압박검사, 진동각검사에서 비교적 진동노출수준과 비려하여 임상소견을 나타내었고, 2차 평가대상자 4인의 경우 신경전도검사에서 1인은 정상, 2인은 수근관증후군, 1인은 말초신경병증으로 해석되었다. 그러나, 문헌 고찰을 통해 수근관증후군으로 나온 신경전도검사결과는 오히려 진동으로 인한 다병소 신경장해로 판단하였다. 6개월후 추적 신경전도검사에서 4인 모두 진동으로 인한 다병소 신경자해를 확인하였다. 그러나, 1인에서는 수근관증후군의 동시존재 가능성을 고려하였다. 결 론 : 고정된 진동공구인 스웨징사용자들에서 수지진동증후군발생을 확인하고, 진동노출수준을 실제로 측정하여 그 양-반응관계를 동시에 평가하였다. 신경전도검사의 해석과 관련하여 수지진동증후군에서 종종 동시 존재하는 수근관증후군과의 연관성 및 감별점을 실례로써 제시함으로써 향후 진동장해를 평가하는데 도움을 주고자 하였다. Objectives : To investigate the hand-arm vibration syndrome (HAVS) among symptomatic swagging workers exposed to hand-arm vibration, using medical evaluation and measurement of workplace vibration. Furthermore, to evaluate the neurophysiological findings. Methods : Four workers showing symptoms relevant to HAVS were evaluated. Medical evaluation consisted of medical interview, questionnaire, nail-bed compression test, and sensory perception tests for vibration and pain. Some other diseases were excluded by a medical interview, hematological assessment, and urinalysis. Cold provocation test was used to assess the peripheral vascular changes, and a nerve conduction velocity (NCV) test was implemented to ascertain the peripheral neural changes. Pegboard, hole plate, and tapping board tests were performed to assess motor nerve function. The hand-arm vibration acceleration levels of the swagging machines were measured. Six months later, follow-up NCV tests were performed. Results : The actual exposure time to vibration was not longer than 15 minutes per day. The hand-arm vibration acceleration levels of the swagging machines, according to actual exposure time, were from 3.63 to 12.98 m/sec^2, by ISO 5349. The vibratory perception thresholds and the recovery time of a nail color following finger cooling were significantly increased in all four workers. The perception of pain was mildly increased. The nerve conduction studies at first diagnosis and follow-up showed multifocal neural impairment caused by vibration. However, we could not rule out the concomitant presence of the carpal tunnel syndrome in one worker. Conclusions : These results show that HAVS can be caused by hand-arm vibration in swagging workers. Interestingly, the NCV results suggested that vibration-induced neural conduction impairments could vary, and need to be interpreted cautiously.

우리나라 社會福祉政策에 관한 연구

金令才,洪性寶 군산대학교 지역개발연구소 1992 地域開發硏究 Vol.4 No.-

복수기 역세정 자동화 개발에 관한 연구

김창호,김덕구,오성보 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.2

This paper describes development of an automatic condenser back wash. A condenser of turbine generator plays an important role in increasing of turbine efficiency with condensing to exhaust steam of low pressure turbine. Therefore. we need automatic condenser back wash system to maintain cleanliness of condenser tube. to improve performance by vacuum management. We have developed the program on automatic condenser back wash by distributed control system. It applys the system of condenser remote control at central control room in Bukcheju thermal power plant No.1 unit. Consequently, this automatic condenser back wash system can contribute to improvement of turbine efficiency by remote control of an automatic condenser back wash valve.