A Matlab Approach To Evaluate product Quality

Wu, Hsin-Hung 한국품질경영학회 2001 The Asian Journal on Quality Vol.2 No.2

This study uses MATLAB as a programming tool and applies the bootstrap method to process capability analysis. The advantage of using MATLAB in bootstrap method is to make the bootstrap method much easier to implement and apply particularly in process capability analysis. An example is provided to further illustrate the easy use of MATLAB in bootstrap method.

An Improvement on Target Costing Technique

Wu, Hsin-Hung 한국품질경영학회 2003 The Asian Journal on Quality Vol.4 No.1

The target costing technique, mathematically discussed by Sauers, only uses the C_(p) index along with Taguchi loss function and X^(-)-R control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the C_(p) value to X^(-)-R control charts to obtain goal control limits. Studies have shown that the point estimator of the C_(p) index, C^_(p), could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the C^_(p) index and using both Taguchi and Spiring's loss functions together with X^(-)-R charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

A Modified Target Costing Technique to Improve Product Quality from Cost Consideration

( Hsin Hung Wu ) 한국품질경영학회 2005 The Asian Journal on Quality Vol.6 No.2

Use of Magnetic Resonance Imaging for Evaluating Residual Breast Tissue After Robotic-Assisted Nipple-Sparing Mastectomy in Women With Early Breast Cancer

Wu Wen-Pei,Lai Hung-Wen,Liao Chiung-Ying,Lin Joseph,Huang Hsin-I,Chen Shou-Tung,Chou Chen-Te,Chen Dar-Ren 대한영상의학회 2023 Korean Journal of Radiology Vol.24 No.7

Objective: Prospective studies on postoperative residual breast tissue (RBT) after robotic-assisted nipple-sparing mastectomy (R-NSM) for breast cancer are limited. RBT presents an unknown risk of local recurrence or the development of new cancer after curative or risk-reducing mastectomies. This study investigated the technical feasibility of using magnetic resonance imaging (MRI) to evaluate RBT after R-NSM in women with breast cancer. Materials and Methods: In this prospective pilot study, 105 patients, who underwent R-NSM for breast cancer at Changhua Christian Hospital between March 2017 and May 2022, were subjected to postoperative breast MRI to evaluate the presence and location of RBT. The postoperative MRI scans of 43 patients (age, 47.8 ± 8.5 years), with existing preoperative MRI scans, were evaluated for the presence and location of RBT. In total, 54 R-NSM procedures were performed. In parallel, we reviewed the literature on RBT after nipple-sparing mastectomy, considering its prevalence. Results: RBT was detected in 7 (13.0%) of the 54 mastectomies (6 of the 48 therapeutic mastectomies and 1 of the 6 prophylactic mastectomies). The most common location for RBT was behind the nipple-areolar complex (5 of 7 [71.4%]). Another RBT was found in the upper inner quadrant (2 of 7 [28.6%]). Among the six patients who underwent RBT after therapeutic mastectomies, one patient developed a local recurrence of the skin flap. The other five patients with RBT after therapeutic mastectomies remained disease-free. Conclusion: R-NSM, a surgical innovation, does not seem to increase the prevalence of RBT, and breast MRI showed feasibility as a noninvasive imaging tool for evaluating the presence and location of RBT.

Light-Emitting Diode-Assisted Narrow Band Imaging Video Endoscopy System in Head and Neck Cancer

Hsin-Jen Chang,Wen-Hung Wang,Yen-Liang Chang,Tzuan-Ren Jeng,Chun-Te Wu,Ludovic Angot,Chun-Hsing Lee,Pa-Chun Wang 대한소화기내시경학회 2015 Clinical Endoscopy Vol.48 No.2

Background/Aims: To validate the effectiveness of a newly developed light-emitting diode (LED)-narrow band imaging (NBI) system for detecting early malignant tumors in the oral cavity. Methods: Six men (mean age, 51.5 years) with early oral mucosa lesions were screened using both the conventional white light and LED-NBI systems. Results: Small elevated or ulcerative lesions were found under the white light view, and typical scattered brown spots were identified after shifting to the LED-NBI view for all six patients. Histopathological examination confirmed squamous cell carcinoma. The clinical stage was early malignant lesions (T1), and the patients underwent wide excision for primary cancer. This is the pilot study documenting the utility of a new LED-NBI system as an adjunctive technique to detect early oral cancer using the diagnostic criterion of the presence of typical scattered brown spots in six high-risk patients. Conclusions: Although large-scale screening programs should be established to further verify the accuracy of this technology, its lower power consumption, lower heat emission, and higher luminous efficiency appear promising for future clinical applications.

A Modified Target Costing Technique to Improve Product Quality from Cost Consideration

Wu, Hsin-Hung The Korean Society for Quality Management 2005 The Asian Journal on Quality Vol.6 No.2

The target costing technique, mathematically discussed by Sauers, only uses the $C_p$ index along with Taguchi loss function and ${\bar{X}}-R$ control charts to set up goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p$ value to ${\bar{X}}-R$ control charts to obtain goal control limits. This study further considers the reflected normal loss function as well as the $C_{pk}$ index along with its lower confidence interval in forming goal control limits. With the use of lower confidence interval to replace the point estimator of the $C_{pk}$ index and reflected normal loss function proposed by Spiring to measure the loss to society, this modified and improved target costing technique would become more robust and applicable in practice. Finally, an example is provided to illustrate how this modified and improved target costing technique works.

3-D NUMERICAL AND EXPERIMENTAL ANALYSIS FOR AIRFLOW WITHIN A PASSENGER COMPARTMENT

Chia-Hung Chien,Yung-Hsin Chen,Shih-Chieh Wu,Jiin-Yuh Jang 한국자동차공학회 2008 International journal of automotive technology Vol.9 No.4

People use cars so frequently that they always consider the air-conditioning, and thermal comfort of the driver and passenger when buying a new car. Therefore accurate simulation of the thermal performance of automobile air conditioners to improve human comfort has become increasingly important. In order to improve the thermal comfort of passengers, 3-D flow motion and thermal behavior within vehicles must be analyzed. In this paper, a numerical simulation was used to investigate thermal behavior in a vehicle. Because air temperature at an air vent is related to the cooling capacity of the air conditioner, the cooling capacity was calculated using ε -NTU (effective number of transfer unit) theoretical equations. Using the air temperature relationship between inlet and outlet vents as boundary conditions, a 3-D unsteady κ -ε turbulent model was used to give a transient analysis simulation of the temperature field and flow conditions in a vehicle’s passenger cabin. Cooling cycle analysis and conjugate heat transfer analysis at the inside surface of the cabin’s ceiling, floor and sides were also considered. The predicted temperature distributions in the vehicles passenger cabin were in good agreement with those obtained experimentally.

Construction of the Operating Limits Diagram for a Ship-Based Helicopter Using the Design of Experiments with Computational Intelligence Techniques

Lin Hsin-Hung,Wu Sheng-Ju,Liu Tsung-Lung,Pan Kuan-Cheng 한국항공우주학회 2021 International Journal of Aeronautical and Space Sc Vol.22 No.1

Compared with land-based helicopters, ship-based helicopters are required to land in a more challenging working environment as the airwakes generated by the wind field flowing through the superstructure of the ship changes the wind field structure. This complicates the wind field structure and affects the safety of flight control. The flight safety of the helicopter pilot can be significantly improved with prior understanding of the relevant information in the ship-based helicopter operating limits (SHOL) diagram. In previous studies, the SHOL diagram of ship-based helicopters has been obtained using numerical simulations in conjunction with a flight simulator. However, the flight simulator equipment is expensive and difficult to maintain. This study references the aforementioned studies by initially employing a numerical simulation method to obtain the flow field information of the interaction between the airwakes of the ship’s superstructure and the downwash flow of the helicopter. Then, the flight simulator is replaced by computational intelligence methods involving artificial intelligence. This significantly reduces the research cost for envelope construction. This study integrates design of experiments (DOE) and computational intelligence techniques (soft computing) to establish a recommended range for the SHOL diagram of ship-based helicopters. This study utilizes the DOE and computational intelligence techniques to construct the SHOL diagram of ship-based helicopters, provide suggestions, and serve as a reference for helicopter pilots and engineering designers to improve the safety during flight.

Electronic and chemical properties of cathode structures using 4,7-diphenyl-1,10-phenanthroline doped with rubidium carbonate as electron injection layers

Chen, Mei-Hsin,Chen, Yu-Hung,Lin, Chang-Tin,Lee, Guan-Ru,Wu, Chih-I,Leem, Dong-Seok,Kim, Jang-Joo,Pi, Tun-Wen American Institute of Physics 2009 JOURNAL OF APPLIED PHYSICS - Vol.105 No.11

Effect of Two-step Time-restricted Feeding on the Fattening Traits in Geese

Lui, Zhen-Jia,Chu, Hung-Hsin,Wu, Yun-Chu,Yang, Shyi-Kuen Asian Australasian Association of Animal Productio 2014 Animal Bioscience Vol.27 No.6

The present study was conducted to determine whether the two-step time-restricted feeding improves the fattening traits of one-step time-restricted feeding in geese. Thirty-six 8-wk-old geese were allotted into one of three groups. Group R1 (the 1-step restricted feeding group) was allowed access to feed for 2 h in the morning from 8 wk to 14 wk of age. Group R2 (the 2-step restricted feeding group) was treated as Group R1, but was additionally fed for 2 h in the afternoon from 12 wk to 14 wk of age. Group C (the control group) was fed ad libitum from 8 wk to 14 wk of age. Feed intake and body weight (BW) were recorded daily and weekly, respectively. At 14 wk of age, the blood samples were collected to determine the fasting plasma levels of glucose, triacylglycerols and uric acid before sacrifice. The results showed that daily feed intake (DFI) was lower, feed efficiency (FE) was higher in both Groups R1 and R2 than in Group C, and daily gain (DG) in Group R2 was higher than in Group R1 during the whole experimental period (p<0.05). Group R1 exhibited lower abdominal and visceral fat weights in carcass than did Group C (p<0.05), and Group R2 was in intermediate. The fasting plasma glucose levels in Group C were higher, and triacylglycerol levels in Group R1 were higher, compared with the other groups (p<0.05). It is concluded that time-restricted feeding in the fattening period not only increases FE but reduces DFI, and the additional meal during the late fattening period improves the DG without the expense of FE in geese.