http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Seung-Wook Kim(김승욱) (검색결과 238 건)
- 무료
- 기관 내 무료
- 유료
-
열분해-가스크로마토그래피/질량분석법에 의한 가황고무중의 유기첨가제의 직접분석
김승욱,허귀석,이계호,Kim, Seung Wook,Heo, Gwi Suk,Lee, Gae Ho 대한화학회 1997 대한화학회지 Vol.41 No.10
Analysis of additives in cured rubber is often a difficult task for analytical chemists because of a wide variety of complex components. Conventional analyses of additives and rubbers have been done in multistep, off-line processes with large sample size and extensive sample preparations. The coumarone-indene resin, resorcinol-formaldehyde resin, and prevulcanization inhibitor have been characterized by their pyrolysis pathways and mass spectra of characteristic pyrolyzates. Pyrolysis Gas Chromatography/Mass Spectrometry (Py-GC/MS) was used in the identification of additives without any sample pretreatment. This result shows that several organic additives in cured rubber can be directly analyzed. 고무가황체는 고분자인 천연고무 및 합성고무에 여러 가지 유기첨가제를 배합하여 만든다. 이와 같은 배합고무의 분석은 여러 가지 다른 성질을 갖는 다양한 첨가제들로 인하여 많은 전처리 과정을 거쳐야 하므로 그 분석이 용이하지 않다. 이를 극복하기 위하여 열분해 가스크로마토그래피질량분석법(Pyrolysis Gas Chromatography-Mass Spectrometry)을 이용하여 고무가황체 중의 유기 고무약품들의 직접분석을 시도하였다. 점착제인 쿠마론-인덴수지(coumarone-indene resin $C-90^{TM}$), 접착제인 알킬페놀 레조시놀 포름알데히드 수지, 가류지연제 등의 고무첨가제의 열분해과정 및 열분해체들의 질량스펙트럼들을 확인하였고 이를 통하여 복잡한 구성 성분으로 이루어진 가황고무 중에서 이들 배합제의 직접분석이 가능하였다.
-
스핀코터 회전속도에 따른 탄탈륨 박막두께의 선형모델에 관한 연구
김승욱,Kim, Seung Wook 한국반도체디스플레이기술학회 2020 반도체디스플레이기술학회지 Vol.19 No.1
Recently, the decrease in thin film thickness has been actively studied by changing several physical elements such as the increase in revolution velocity of lower substrate equipped with AC or DC motor. In this paper, we propose a novel spin coater control system that changes AC or DC motor and common use software with limitation of velocity and position control into step motor and LABVIEW software based on GUI to control revolution velocity and position more precisely. By determining six input values of rotation velocity 1, 5, 10, 25, 50, 100 PPS, we fabricated six samples using coating target, TA(tantalum) on silicon substrate and measured their thin film thickness by SEM. Hence, this research can be applied to inferring thin film thickness of tantalum regarding any value of revolution velocity without additional experiments and for linear reference model via property analysis of thin film thickness using other thin-film materials.
-
-
U-Healthcare를 위한 Visualization Engine 개발
김승욱,김민철,Kim, Seung-Wook,Kim, Min-Cheol 한국정보통신학회 2008 한국정보통신학회논문지 Vol.12 No.10
최근 웰빙, 건강 등을 추구하는 보건의료분야에 대한 관심이 증가하면서, 언제, 어디서나 자신의 건강에 대한 상태를 모니터링 할 수 있도록 가능하게 하는 u-Healthcare 서비스가 주목받고 있다. 기존의 의료정보시스템은 측정값의 저장과 단순 디스플레이만이 지원되는 구조로 구성되어 있으나, 이러한 의료정보시스템에서 사용자가 편리하고 효율적인 상태확인이나 진단을 하기 위해서는 원하는 의료정보를 빠르고 정확하게 제공해주도록 원활한 상호 작용을 해야 할 필요성이 있다. 이와 관련하여 본 연구결과는 u-Healthcare의 다양한 서비스에서 보다 사용자 친화적(user-friendly)이면서도 더 나은 정보변별력을 제공하는 Visualization Engine에 대한 개발적 내용을 제시하였다. As the interest on healthcare area in pursuit of well-being, health etc is increasing, u-Healthcare service that can monitor the condition of oneself's health anytime & anywhere is getting an attention. The existing health information system is consist of structure supporting the storage of estimation value and just simple display. But this needs to get a harmonious interaction to provide the health information exactly and speedily for efficient condition confirmation and diagnosis in health information system, In relation to this, this study proposed the developmental contents about visualization engine providing the beuer information discrimination and more user-friendly in various service of u-Healthcare.
-
다층 PVD 코팅을 이용한 SKD 61다이캐스팅 강의 표면 특성 비교 분석
김승욱,Kim, Seung Wook 한국반도체디스플레이기술학회 2021 반도체디스플레이기술학회지 Vol.20 No.2
The properties of materials which are widely used in industry fields like automobile, shipbuilding, casting, and electronics are strongly needed to have higher surface hardness, lower surface roughness, and higher compressive residual stress. As mentioned above, for the purpose of satisfying three factors, a variety of researches with respect to surface improvement have been actively studied and applied to every industry. SKD61 which is mostly used for die casting process of cold chamber method must meet a countless number of problems which are thermal, mechanical and chemical from highly specific working environment at high temperature over 600℃. Above all, in case of plunger sleeves used for die casting process, thermal fatigue has a bad effect on the surface of an inlet where molten metal is repeatedly injected. On account of it, plunger sleeves cause manufacturers to deteriorate quality of products. Therefore, in this paper, to improve the surface of an inlet of plunger sleeve, multilayer PVD coating using Ti, Cr and Mo is suggested. Furthermore, The surface characteristics such as surface roughness(Rsa, Rsq), surface hardness(HRB, HRC) and residual stress using XRD(X-ray diffractometer) of coated samples and specimens are studied and discussed.
-
Streptomyces peucetius subsp . caesius 돌연변이주에 의한 doxorubicin 생산의 최적배양조건
김승욱,송수문,문순옥 ( Seung Wook Kim,Soo Moon Song,Soon Ok Moon ) 한국공업화학회 1997 공업화학 Vol.8 No.4
본 연구에서는 Streptomyces peucetius subsp. caesius 돌연변이주에 의한 doxorubicin의 생산에 있어서 배양조건 및 배지의 성분을 확립하여 doxorubicin의 생산성을 높이는데 목적이 있다. Doxorubicin 생산을 위한 최적 배지조성은 4% maltose, 0.5% HEPES, 0.02% K₂HPO₄, 0.01% MgSO₄로 나타났고, 가장 적합한 종균 접종량과 시기는 10%(v/v), 72시간이었다. Doxorubicin생산에 적합한 소포제를 찾기위해 여러 종류의 소포제를 배지에 첨가한 결과 가장 적합한 소포제는 KG(10% K+10% G)이었으며 최적농도는 0.01%이었다. 교반식반응기에서 배양할 경우 적합한 통기량은 1.5v/v min으로 최대 29mg/l의 doxorubicin을 생산하였고, 1.0v/v min의 경우에도 플라스크 배양보다 15% 증가된 23mg/l의 doxorubicin을 생산하였다. The production of doxorubicin by a mutant of Streptomyces peucetius subsp. cazesius was studied. The optimal culture conditions, such as inoculum size and medium composition were established to improve the productivity of doxorubicin. The optimal medium composition was found to be 4% maltose, 0.5% HEPES, 0.02% K₂HPO₄, 0.01% MgSO₄. As an antiform agent, 0.01% KG(10% Adekanol+10% Silicone) was suitable one among various agents. Culture was carried out in 2.5 L jar-fermenter with different aeration rates of 1.5, 1.0, and 1.5 v/v min. The maximum production of doxorubicin(29 mg/l) was obtained at 1.5 v/v min of aeration rate, and even at 1.0 v/v min, the production of doxorubicin was increased up to 15% compared with that of shake-flask culture.
-
김승욱(Kim, Seung-Wook) 역사비평사 2016 역사비평 Vol.- No.117
The socialist transformation of Shanghai was a process to renew the city to realize socialist theory and direction by converting it from a consumption - to a production-city. There was a planning of expanding the city area, dispersing the population by laying out industrial districts and saterlite towns, and organically restructuring the whole area. Laborers’ New Village was a spatial praxis representing socialist transformation of the city. It helped the laborers’, who had been spatially isolated in old Shanghai, to hold the appropriate position of city dwellers. Planning for the transformation had to contend with considerable problems, including finance. Living conditions in the Laborers’ New Villages had been deteriorating since Cao Yang Xin Cun, the first Laborers’ New Village, had been constructed. At the same time, Laborers’ New Villages, scattered in peripheral areas, did not function to fundamentally change the heirarchical spatial structure of old Shanghai, while Shanghai as a whole did not achieve the goal of becoming an organic structure. The limitations and characteristics of spatial structure have influenced city dwellers’ spatial experiences and their construction of memories.
-
-
-
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
