자궁경부에 발생한 배아성 횡문근육종 2예

박정열,조준식,김대연,이동헌,김종혁,김용만,김영탁,목정은,남주현 대한부인종양 콜포스코피학회 2002 Journal of Gynecologic Oncology Vol.13 No.3

횡문근육종은 소아와 청소년기에 가장 흔한 연부조직 육종이다. 발생 부위는 일반적으로 두부 및 경부, 그 다음으로 비뇨생식계이다 조직학적으로 배아성 횡문근육종, 국화상 육종, 폐포성 횡문근육종, 다형성 횡문근육종으로 나누어진다. 횡문근육종의 약 20%가 비뇨생식기에서 발생하고, 50% 이상이 배아성 횡문근육종이다. 여성 생식기의 배아성 횡문근육종은 드문 악성 종양으로,주로 유소아의 질에서 발생하며, 자궁경부에서 발생하는 횡문근육종은 청소년기에 흔하고, 질에서 기원하는 횡문근육종이 자궁경부에 기원하는 경우보다 5배 정도 많다. 폐경기여성에서는 자궁체부에서 가장 흔히 발생한다. 비뇨생식기의 횡문근육종의 치료는 과거에는 골반장기 적출술만으로 치료를 시도하였으나. 서서히 다중 항암화학요법, 방사선요법, 근치적 절제술을 포함한 병합요법으로 바뀌어가고 있으며, 이에 따라 생존율이 현저하게 향상되었다. 이에 저자들은 최근 본원 산부인과에서 자궁경부에 발생한 배아성 횡문근육종 2예를 경험하였기에 문헌 고찰과 아울러 보고하는 바이다. Rhabdomyosarcoma is the most common soft tissue sarcoma in childhood and young adult. Genitourinary tract is the econd most common site of rhabdomyosarcoma. Rhabdomyosarcoma can be classified into one of four major types; embryonal, alveolar, pleomorphic and undifferentiated. Embryonal rhabdomyosarcoma of the female genital tract is rare malignant tumor and usually occurs during childhood in the vagina. In rare cases, rhabdomyosarcoma can originate in the uterine cervix, with a peak incidence in the second decade. Recently we have experienced two cases of embryonal rhabdomyosarcoma of the uterine cervix. These cases are presented with a brief review of the literature.

뇌성마비 환아의 발달 평가와 유발 전위, 뇌파,뇌 자기 공명 영상의 비교연구

서정수,김태민,채진목,김영경,김봉옥 大韓再活醫學會 2000 Annals of Rehabilitation Medicine Vol.24 No.4

수산물에 이산화염소(ClO₂) 처리에 따른 변이원성 및 Chlorate와 Chlorite ion의 결정

김정목 木浦大學校 工業技術硏究所 2000 工業技術硏究誌 Vol.10 No.-

The use of chlorine dioxide (CIO2) as a potential substitute for aqueous chlorine to improve the quality of seafood products has not been approved by regulatory agencies due to health concerns related to the production of chlorite (CIO2-) and chlorate (CIO3-) as well as possible mutagenic/ carcinogenic reaction products. Cubes of Atlantic salmon (Salmo salar) and red grouper (Epinephelus morio) were treated with 20 or 200 ppm aqueous chlorine or CIO2 solutions for 5 min, and extracts of the treated fish cubes and test solutions were checked for mutagenicity using the Ames Salmonella/microsome assay. No mutagenic activity was detected in the treated fish samples or test solutions with CIO2. Only the sample treated with 200 ppm chlorine showed weak mutagenic activity towards S. typhimurium TA 100. No chlorite residue was detected in sea scallops, maxi-mahi, or shrimp treated with CIO2 at 3.9 - 34.9 ppm. However, low levels of chlorate residues were detected in some of the treated samples. In most cases, the increase in chlorate in treated seafood was time- and dose-related.

프리스트레스트 콘크리트 橋梁의 解析 및 設計自動化

金亮均,李準熙,崔正鎬,申鉉穆 成均館大學校 科學技術硏究所 1995 論文集 Vol.46 No.2

Computer programs called "PCBRG" and "PCPST' were developed to analyze and design the prestressed concrete bridge. PCBRG is a structural analysis program which can determine the member forces, displacements and adaptable area of tendon by iteration method. PCPST is a post-processor for design. It enables design variables verified and the results of analysis (stress, member force and displacement, etc) are presented in the screen. Also the shear force and bending strength by the deformation compatibility method were checked.

BLDC 서보 모터용 One-chip DSP 컨트롤러 개발

조정목,김용재,조중선 국립7개대학공동논문집간행위원회 2004 공업기술연구 Vol.4 No.-

The Resolver usually used in industry is the absolute angle analog sensor that must be in order driving BLDC (brushless DC) motor, and it needs RDC(Resolver-to-Digital converter) for changing the output signal to digital to be applied to the SVPWM(Space Vector Pulse Width Modulation) algorithm. Commonly used S/W RDC needs trigonometric function. What it takes a lot of calculation time of processor is gotten at weak point. In this paper, S/W RDC is realized except trigonometric functions as a result of feedback resolver outputs after filtering using FIR filter. thus, processing time is reduced. So. One-chip DSP Controller operating the Vector Control, RDC, and SVPWM can be designed.

세라믹 분리막을 이용한 염료용액 처리에서의 역세척 효과

양정목,김현기,이병환,김상용,김지형 경희대학교 2004 環境硏究 論文集 Vol.13 No.-

The composition of wastewater from dyeing and textile industry is highly variable depending on the dyestuff type. generally the wastewater has high levels of Chemical Oxygen Demand (COD) and color. The decolorization, Total Organic carbon (TOC) removal and petnleate flux used were examined using reactive yellow 84 as dye and ceramic membrane process. On addition, dye particle size distribution, clean water flux and Molecular Weight Cut-Off (MWCO) were measured. The backflushing results show that best permeate flux was obtained when backflushing was performed 3 seconds every 2 minutes at A bar from the pei meaty side. the backflushing frequency and pulse were the most important factors affecting the permeate flux.

대유행인플루엔자 대비를 위한 의료기관-바탕 탁상훈련 : 고안 및 평가

설희윤,김지량,권보란,목정하,이선희,곽임수,정진우,김정수,고옥배,조은희,김성순,신상숙,이상원 대한감염학회 2008 감염과 화학요법 Vol.40 No.2

목적 : 의료기관의 범유행 인플루엔자에 대한 효과적인 대비를 위한 훈련방법으로서 의료기관-바탕 탁상훈련 (hospital based tabletop exercise)의 유용성과 순응도를 평가하기 위해서 시행되었다. 재료 및 방법 : 탁상 훈련은 부산대학교 병원에서 시행되었으며 병원의 주요의사결정권자 및 주요부서 대표자, 실무자 42명이 지휘부, 진료부, 지원부 3그룹으로 나뉘어 훈련에 참가하였다 탁상훈련의 시나리오는 의료기관의 자체 훈련을 위해서 고안하였으며 현재 동남아에서 유행하고 있는 H5N1 인플루엔자가 국내에 처음으로 유입되어 확산되는 과정에서 의료기관에서 발생할 수 있는 상황을 3가지 모듈로 구성하였다. 훈련 평가는 훈련 전후에 각각 익명의 설문조사를 시행하였다. 결과 : 훈련에 초청된 참여자 42명 중 37명(88%)이 실제 당일 훈련에 참여하였다. 훈련에 참여한 37명의 직원 중에서 훈련 전 시행한 설문에 27명(73%)이 응답하였다. 훈련 전 정가에서는 훈련을 통해 획득하고 싶은 지식이나 기술의 우선 순위를 물었으며, 참여자들이 가장 중요하다고 생각하는 항목은 대유행인플루엔자 바이러스에 대한 지식 향상 22%, 병원 각 부서가 취해야 할 계획 및 의사소통과 관련된 지식 향상 19%, 지역사회 병원들 간의 상호협력을 향상시킬 전략 계발이 19%이었다. 그룹토의 동안에는 환자의 조기 발견 이후 대응에 대한 토론이 많았지만, 구체적인 부분이 미흡하였고, 대유행 인플루엔자에 대한 기본적인 이해가 부족하였다. 훈련에 참여한 37명의 직원 중에서 훈련 후 시행한 설문에 21명(57%)이 응답하였다. 훈련 후 평가에서 탁상훈련의 전반적인 만족도에 대한 질문에서 81%가 만족하였다고 답변을 하였고, 새로운 것을 배우는데 유용했는가 대한 질문에도 86%가 유용했다고 답변하였다. 결론 : 탁상훈련은 의료기관의 대유행인플루엔자 대비에 효과적인 훈련방법이라고 생각되며 훈련을 통해 의료기관 내의 여러 부서들이 각 의료기관의 특성에 맞는 현실적이고 실제적인 대비 계획을 수립하는데 도움을 줄 것으로 기대된다. 그러나 향후 토른 촉진, 구체적인 결과에 도달을 유도할 수 있는 질문, 끼워넣기 개발, 적절한 시간 등에 대한 연구가 필요할 것으로 생각된다. Background : To evaluate the usefulness and compliance of a hospital-based tabletop exercise in setting of pandemic influenza in hospitals. Materials and Methods : Tabletop exercise was held in Pusan National University Hospital and forty two hospital employees were invited to participate in the exercise. The scenario for hospital-based tabletop exercise was designed. It consisted of three modules, which simulated the influx and outbreak of H5N1 influenza that was epidemic in Southeast Asia. Pre-, post-exercise surveys were completed by anonymous questions. Results : Thirty-seven (88%) of 42 invited participants attended exercise. AII members of the administration group and the ancillary services group participated. But, only 77% members of the clinical services group participated. In pre-exercise survey, priorities of eight goals regarding skills and knowledge during exercise were inquired., The highest priorities pointed out by the respondents were "Increase the knowledge of pandemic influenza" (22%), "Development of strategies for optimal communication among employees within specific department" (19%) and "Development of strategies for improved coordination between facilities within the health system" (19%). Twenty-one (57%) of participants completed the post-exercise surveys. At post-exercise surveys, 81% of the participants stated that the tabletop exercise was extremely or very useful, 86% of the participants also stated that it increased their knowledge of pandemic influenza. Conclusion : Tabletop exercise is an effective modality for increasing pandemic influenza preparedness in hospitals, and this method is useful for guiding preparedness activities within the hospital environment. Further studies to determine the appropriate method of discussion, questionnaire, duration of exercise and injection are needed.

진자검사시 근육 길이의 변화를 이용한경직의 정량적 측정

조강희,채진목,서정수,김태민,김봉옥,임현균,이영신 大韓再活醫學會 2000 Annals of Rehabilitation Medicine Vol.24 No.4

Properties of ZnO thin films co-doped with hydrogen and fluorine.

Kim, Yong Hyun,Kim, Jin Soo,Jeong, Jeung-Hyun,Park, Jong-Keuk,Baik, Young Joon,Lee, Kyeong-Seok,Cheong, Byung-Ki,Kim, Donghwan,Seong, Tae-Yeon,Kim, Won Mok American Scientific Publishers 2012 Journal of Nanoscience and Nanotechnology Vol.12 No.4

<P>ZnO films co-doped with fluorine and hydrogen were prepared on Corning glass by radio frequency magnetron sputtering of ZnO targets with varying amounts of ZnF2 in H2/Ar gas mixtures of varying H2 content. The ZnO films' electrical, optical, and structural properties in combination with their compositional properties were investigated. A small addition of H2 to the sputtering gas caused a drastic increase of Hall mobility with a marginal increase in carrier concentration, indicating an effective passivation of grain boundaries due to hydrogenation. For further increase of H2 in sputter gas, the Hall mobility remained at a relatively constant level while the carrier concentration increased steadily. Most of the ZnO films co-doped with fluorine and hydrogen showed average transmittance higher than 83% in the 400-800 nm range, while the average absorption coefficients were lower than 600 cm(-1), implying very low absorption loss in these films. It was discovered that the fabrication of ZnO films with a Hall mobility higher than 40 cm2/Vs and a very low absorption loss in the visible range is possible by co-doping hydrogen and fluorine.</P>

Effects of anisotropic properties on bursting behavior of rectangular cup with a V-notch

Jeong-Tai Kim,Sang-Mok Kim,강범수,구태완 대한기계학회 2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.30 No.9

Effects of mechanical anisotropic properties on bursting failure and its pressure of rectangular deep-drawn cup fabricated by using AA3005-H14 thin sheet are investigated to utilize for electrolyte container of lithium-ion secondary batteries. The V-notch shape with a depth of 0.1 mm and an angle of 20.0˚ is defined on the rectangular cup, which has a thickness of 0.20 mm on the major surface and that of 0.30 mm on the minor surface. With the measured mechanical properties by uni-axial tensile tests and the defined V-notch geometry, a series of numerical prediction models considering isotropic, planar and normal anisotropic characteristics, are built-up and the bursting simulations are performed. Thereafter, the bursting fracture behavior is investigated by adopting ductile fracture criterion proposed by Cockcroft and Latham. The results predicted for the planar and the normal anisotropic models show that the bursting fracture pressure is well matched to 0.400 MPa, and the isotropic and the planar anisotropic models present a bursting fracture height of about 4.95 mm and 4.92 mm, respectively. A series of experimental investigations are undertaken to verify the bursting deformation that had been predicted. The bursting pressure and its height during experimental verifications are shown to be in good agreement with each variation of about 5.88% and roughly 0.20% with respect to the numerical results obtained using the planar anisotropic model.