http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
도재와 상아질의 표면 처리가 도재의 파절 강도에 미치는 영향
이신원,이선형,양재호,정헌영,Lee, Shin-Won,Lee, Sun-Hyung,Yang, Jae-Ho,Chung, Hun-Young 대한치과보철학회 1999 대한치과보철학회지 Vol.37 No.5
The major influencing factors on the strength of all-ceramic crowns are types of dental ceramics, fabrication techniques, methods of abutment preparation and cementation modes of all-ceramic restorations. Zinc phosphate cement and glass-ionomer cement were used as an early lot-ing media for all-ceramic crowns. Recently many studies have reported that resin cements have more advantages in increasing the fracture strength of restorations comparing with zincphosphate cement and glass-ionomer cement. The purpose of this study is to investigate the effect of etching, silane treatment, sandblasting and dentin bonding agents on fracture strengths of dental ceramics. 40 flat dentin specimens and 40 ceramic discs of 1.5mm thickness and 8mm diameter were fabricated, and divided into 4 groups according to surface treatments. Surface treatments before cementation were as follows Group I : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : application of dentin bonding agent Group II : (ceramic) : sandblasting - application of bonding resin (dentin) : application of dentin bonding agent Group III : (ceramic) : application of bonding resin (dentin) : application of dentin bonding agent Group IV : (ceramic) : HF etching - silane treatment - application of bonding resin (dentin) : no dentin bonding procedure Dentin specimens and ceramic discs were cemented with dual cure resin cement, and went through thermocycling. Compressive stress es were loaded on the centers of ceramic discs with Instron test-ing machine, and fracture strengths resistance for catastrophic fracture were measured The results were as follows. 1. The group I showed the highest fracture resistance. The next was group II And group III, IV followed. 2. There was a significant difference in the mean value of fracture strengths between group I and group III (p<0.05), but no significant differences between group I and group II, and group II and group III (p>0.05). 3. There was a significant difference in the mean value of fracture strengths between group I and group IV (p<0.05).
이신원,안태환,안현식,이운성,김도현,김상섭,Lee, Sin-Won,An, Tae-Hwan,An, Hyeon-Sik,Lee, Un-Seong,Kim, Do-Hyeon,Kim, Sang-Seop 대한전자공학회 1998 電子工學會論文誌, S Vol.s35 No.9
본 논문에서는 능동형 샤시 시스템이 정착된 차량의 안정성(Stability), 조종성(Handling) 및 승차감(Ridecomfort)을 향상시키기 위한 새로운 통합제어기를 설계한다. 하이브리드 퍼지논리 제어기는 퍼지논리 제어기, 스카이 훅 제어기, 자세 제어기 및 롤 모멘트 분포 제어기로 이루어지며, 차량의 주행상태에 기초한 통합제어로직을 이용하여 위와 같은 제어기들을 적절히 결합시켜 사용한다. 또한 MATRIXx/SYSTEMBBUILD 소프트웨어를 이용하여 16자유도 차량모델에 대하여 시뮬레이션을 수행함으로써 차량의 승차감, 조종성 및 능동적 안전도가 향상됨을 확인한다. In this paper, a novel type of an integrated controller is designed for vehicles equipped with active classis systems to improve vehicle stability, handling, and ride comfort. The hybrid fuzzy logic controller consists of a fuzzy logic controller, a skyhook controller, an attitude controller, and a roll moment distribution controller, and these controllers are used with a proper combination which is determined by the integrated control logic based on driving conditions of a vehicle. It is shown by simulations using MATRIXx/SYSTEMBBUILD software that ride comfort, handling, and active safety are improved for a 16 degree-of-freedom vehicle dynamic model.
클러스터 중심 결정 방법을 개선한 K-Means 알고리즘의 구현
이신원,오형진,안동언,정성종,Lee Shin-Won,Oh HyungJin,An Dong-Un,Jeong Seong-Jong 한국정보처리학회 2004 정보처리학회논문지B Vol.11 No.7
K-Means algorithm is a non-hierarchical (plat) and reassignment techniques and iterates algorithm steps on the basis of K cluster centroids until the clustering results converge into K clusters. In its nature, K-Means algorithm has characteristics which make different results depending on the initial and new centroids. In this paper, we propose the modified K-Means algorithm which improves the initial and new centroids decision methodologies. By evaluating the performance of two algorithms using the 16 weighting scheme of SMART system, the modified algorithm showed $20{\%}$ better results on recall and F-measure than those of K-Means algorithm, and the document clustering results are quite improved. K-Means 알고리즘은 재배치 기법의 일종으로 K개의 초기 센트로이드를 중심으로 K개의 클러스터가 될 때까지 클러스터링을 반복하는 것이다. 알고리즘의 특성상 K-Means 알고리즘은 초기 클러스터 센트로이드(중심) 및 클러스터 중심을 결정하는 방법에 따라 다른 클러스터링 결과를 얻을 수 있다. 본 논문에서는 K-Means 알고리즘을 이용한 초기 클러스터 중심 및 클러스터 중심을 결정하는 방법을 개선한 변형 K-Means 알고리즘을 제안한다. 제안한 알고리즘의 평가를 위하여 SMART 시스템의 16가지 가중치 계산 방식을 이용하여 성능을 평가한 결과 변형 K-Means알고리즘이 K-Means 알고리즘보다 재현률과 F-Measure에서 $20{\%}$이상 향상된 결과를 얻을 수 있었으며 특정 주제 아래 관련 문서가 할당되는 클러스터링 성능이 우수함을 알 수 있었다.
이중퀜치를 이용한 삼상변압기형 초전도한류기의 삼상지락 고장 종류에 따른 고장전류 제한 특성 분석
이신원,한태희,임성훈,Shin-Won Lee,Tae-Hee Han,Sung-Hun Lim 한국전기전자재료학회 2023 전기전자재료학회논문지 Vol.36 No.6
The fault current limiting characteristics of three-phase transformer type superconducting fault current limiter (SFCL), which consisted of three-phase primary and secondary windings wound on E-I iron core, one high-TC superconducting (HTSC) element connected with the secondary winding of one phase and another HTSC element connected in parallel with other two secondary windings of two phases, were analyzed. Unlike other three-phase transformer type SFCLs with three HTSC elements, three-phase transformer type SFCL using double quench has the merit to perform fault current limiting operation for three-phase ground faults with two HTSC elements. To verify its proper three-phase ground fault current limiting operation, three-phase ground faults such as single-line ground, double-line ground and triple-line ground faults were generated in three-phase simulated power system installed with three-phase transformer type SFCL using double quench. From analysis of its fault current limiting characteristics based on tested results, three-phase transformer type SFCL using double quench was shown to be effectively operated for all three-phase ground faults.
Voice / Data를 통합한 Broadcast Star LAN의 성능 분석에 관한 연구
이신원(Shin-Won Lee),이동춘(Dong-Chun Lee),양승원(Seung-Won Yang),이용석(Yong-Suk Lee) 한국정보과학회 1991 한국정보과학회 학술발표논문집 Vol.18 No.2
근거리 통신망에 대한 발전이 급격히 이루어지면서 data뿐만 아니라 voice를 통합한 종합정보 통신망이 연구되고 있다. 그래서, 본 논문에서는 충돌회피에 기저를 둔 Broadcast Star LAN에서 우선 순위를 가진 Voice/Data 모델을 제시하고 성능 분석을 하기 위해 수학적 해석 방법을 제시한다. 각 스테이션에서는 일정한 크기의 slot을 이용하며 voice는 data보다 높은 우선 순위를 가지고 slot을 선택할 수 있고 패킷(packet)의 우선순위는 확률적으로 선택한다. 본 논문이 제시한 모델은 전처리식 다중 대기 행렬구조를 가진 M/D/I 형태의 시스템으로서 분석 결과 재전송이 적을 수록 Voice/Data인 경우는 data인 경우와 근사함을 볼 수 있으며, voice 패킷이 우선순위를 가짐으로서 실시간 처리를 위한 전송지연시간을 단축시키고 효율적인 전송 스케쥴링을 구성함을 보였다.
K-Means 클러스터링 성능 향상을 위한 최대평균거리 기반 초기값 설정
이신원 ( Shin-won Lee ),이원휘 ( Won-hee Lee ) 한국인터넷정보학회 2011 인터넷정보학회논문지 Vol.12 No.2
대규모 데이터에 대한 특성에 따라 몇 개의 클러스터로 군집화하는 클러스터링 기법은 계층적 클러스터링이나 분할 클러스터링 등 다양한 기법이 있는데 그 중에서 K-Means 알고리즘은 구현이 쉬우나 할당-재계산에 소요되는 시간이 증가하게 된다. 본 논문에서는 초기 클러스터 중심들 간의 거리가 최대가 되도록 하여 초기 클러스터 중심들이 고르게 분포되도록 함으로써 할당-재계산 횟수를 줄이고 전체 클러스터링 시간을 감소시키고자 한다. Clustering methods is divided into hierarchical clustering, partitioning clustering, and more. If the amount of documents is huge, it takes too much time to cluster them in hierarchical clustering. In this paper we deal with K-Means algorithm that is one of partitioning clustering and is adequate to cluster so many documents rapidly and easily . We propose the new method of selecting initial seeds in K-Means algorithm. In this method, the initial seeds have been selected that are positioned as far away from each other as possible.
친환경 설계를 위한 하수처리수 재이용시설의 전과정 평가
이신원(Lee Sin-Won),김성근(Kim Sung-Keun) 대한토목학회 2011 대한토목학회논문집 D Vol.31 No.2D
제품의 제조, 사용, 폐기 등 전과정에서 발생되는 환경부하를 평가하기 위해 국제표준화기구(ISO)에서 채택한 전과정평가(LCA)는 개별 제품뿐만 아니라 건축물이나 사회기반시설과 같은 복잡한 시스템으로 광범위하게 적용되고 있다. 하수처리수 재이용시설에 LCA를 도입하는 것은 수질오염물질의 처리뿐만 아니라 이와 관련한 다른 여러 활동의 상호 작용을 포함한 전체적인 시스템을 파악할 수 있게 된다. 본 연구는 전과정 평가기법을 적용하여 하수처리수 재이용시설에 대한 전과정 영향평가를 수행하였다. 전과정 영향평가의 결과, 수계생태독성이 88.3%로 가장 큰 환경부하를 가지는 것으로 나타났으며, 전 과정에서 가장 큰 영향을 미치는 단계는 운영 및 유지관리단계로 나타났다. 본 연구의 결과는 종합적인 환경부하를 정량화함으로서 환경정책 수립자에게 환경 개선의 기회를 규명할 수 있는 정보를 제공해 줄 수 있으며, 건설 초기단계에서 친환경적인 설계를 위한 의사결정시 판단자료로 활용할 수 있을 것이다. In order to evaluate the environmental load occurring from the whole life cycle of a facility, LCA (Life Cycle Assessment) adopted by ISO is not only applied as an individual product but rather a complicated system involving buildings and/or infrastructure in a wide range of scope. The introducing of LCA to a wastewater reuse facility will assist to understand not only the treatment of water contaminants but also the overall system related to the interaction of involved, potential issues. This research implemented LCA for the establishment of the wastewa0ter reuse facility. The results show that a fresh water aquatic Eco-toxicological impact (88.3%) is the largest environment concern and the maintenance & operation phase has the most impact on the environment utilizing life cycle for the wastewater reuse facility. The civil works and chemical treatments in the maintenance & operation phase led to the biggest environmental impact. The results of this research can provide pertinent data of investigating opportunities for environmental improvement not limited to public officers regulating environmental policies, and could be used to make decisions for an environmentally sound and sustainable design in the initial phase of construction.