http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
황연,손용운,정헌생,이홍기,박현서,Hwang, Y.,Sohn, Y. U.,Chung, H. S.,Lee, H. K.,Park, H. S. 한국자원리싸이클링학회 1997 資源 리싸이클링 Vol.6 No.1
산업 폐기물의 일종인 석회석 슬러지, 폐주물사, 석탄회 및 폐유리병을 고온에서 용융 슬래그화 하여 시멘트 원료로서의 활용 가능성을 검토하고자 하였다. 각 폐기물을 혼합한 후 용융처리하여 얻은 용융 슬래그는 $\beta$-$C_2$S(2CaO.$SiO_2$) 및 $C_2$AS(2CaO.$Al_2$$O_3$.$SiO_2$)의 2가지 상으로 구성되어 있다. 폐기물의 용융처리시 용융온도, 냉각속도 및 염기도 등을 변화시키면서 이들 요인이 $\beta$-$C_2$S상의 생성율에 미치는 영향을 조사하였다. 시멘트 원료로서 활용이 가능한 $\beta$-$C_2$S상의 함율을 높이기 위해서는 첫째 용융온도를 낮추어 용융슬래그의 제조에 필요한 최소한의 온도에서 용융시키고, 둘째 용융물을 고온에서 급냉시키며, 셋째 낮은 염기도를 갖도록 혼합물의 조성을 조절하는 것이 필요하다. The feasibility of using the industrial inorganic waste materials such as l~mestone sludge. Soundly sand. coal fly 'ash, and chemical glasses as a raw material for cement clinker by melting treatmeut was iovestigated. The slag wh~ch is obtained from thc melts of the mixtnres of waste materials is composed of P-C,S(ZCaO - SIOJ and C,AS(ZCaO . AI,O, . SiO,) phases. The effect of melting tempcrabre, coaling condition and CIS ratio on the fo~mation of P-C,S phasc was examed. In order to obtain thc P-CiS phase which is useful in thc utilhtion as a clinkcr malcrid, it B found that sudl considerations as low melting temperature as possible of the wastc mixhire, quenching the melts and law CIS ratio of the mlxhlre are necessary.
노현석,박현서,김경숙,이경준,박용직,이윤주,Roh, H.S.,Park, H.S.,Kim, K.S.,Lee, K.J.,Bahg, Y.J.,Lee, Y.J. 한국전자통신연구원 2001 전자통신동향분석 Vol.16 No.6
본 논문은 지금까지 이동망에서 제공된 단문 서비스 외에 특정 지역에 특정 정보를 전송할 수 있는 CBS에 대해 살펴본다. CBS는 단대단(end-to-end) 형태로 서비스 즉, 컨텐츠를 다른 사용자에게 제공하는 것이 아니라 특정 서비스 제공자(contents provider)가 사용자에게 광고나 중요한 정보들을 제공하는 방식으로, 단순한 서비스 제공뿐만 아니라 연관된 서비스들을 재창출할 수 있는 장점이 있다. CBS는 3GPP에서 제안한 SABP를 기반으로 관련된 연구개발이 이루어지고 있으며, 현재 핵심망과 관련된 CBC의 기능이 개발되어 프로토타입 형태의 연구가 이루어지고 있다. 향후 CBS 서비스의 성공 여부는 무엇보다도 CBS에서 제공할 서비스의 적절한 분류와 양질의 컨텐츠 제공에 달려 있다고 판단되며, 이와 더불어 서비스 제공자에게 사용이 편리한 이용 환경들을 제공할 수 있도록 시스템과 서비스가 개발되어야 할 것이다.
PEMFC 용 Pt 담지 촉매의 Pt 담지비에 따른 성능변화
조용훈(Y. H. Cho),조윤환(Y. H. Cho),박현서(H. S. Park),성영은(Y. E. Sung) 한국정밀공학회 2006 한국정밀공학회 학술발표대회 논문집 Vol.2006 No.5월
This study focuses on a determination of amount of Pt in the Pt/C for catalysts of polymer electrolyte membrane fuel cells (PEMFC). PEMFC offer low weight and high power density and being considered for automotive and stationary power applications. The PEMFC behavior is quite complex is influenced by several factors, including catalysts and structure of electrode and membrane type. Catalyst of electrode is important factor for PEMFC. One of the obstacles preventing polymer electrolyte membrane fuel cells from commercialization is the high cost of noble metals to be used as catalyst, such as platinum. To effectively use these metals, they have to be will dispersed to small particles on conductive carbon supports. The optimal amount of Pt in Pt/C was investigated by using polarization curves in single cell with H₂/O₂ operation.