http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Phong Shading 알고리즘을 적용한 3차원 영상을 위한 고속 그래픽스 가속기 연구
박윤옥,박종원,Park, Youn-Ok,Park, Jong-Won 한국인터넷방송통신학회 2010 한국인터넷방송통신학회 논문지 Vol.10 No.5
2차원 그래픽을 3차원 그래픽으로 변환하기 위한 삼차원 그래픽 알고리즘들은 복잡하고 다양한 기법의 사용으로 인하여 대규모의 반복 연산이 요구되고, 이로 인하여 실시간 삼차원 그래픽의 처리가 어려운 경우가 많다. 본 논문은 삼차원 그래픽 처리와 관련된 여러 가지 알고리즘 중에서 Phong Shading 알고리즘의 병렬처리 방법과 고속 하드웨어 처리를 위한 삼차원 그래픽 가속기에 관한 것으로, Park's 다중접근 기억장치와 다수의 연산기로 구성된 SIMD처리기를 사용한 삼차원 그래픽 가속기 구조를 제안하고 있으며, 제안된 가속기 구조를 HDL을 사용한 시뮬레이션을 통해 본 논문에서 제안된 삼차원 그래픽 가속기에 의해 복잡한 알고리즘을 갖은 어떠한 삼차원 그래픽 알고리즘도 병렬 처리 알고리즘을 적용하여 SIMD 가속기에 의한 실시간 처리가 가능함을 보였다. There are many algorithms for 2D to 3D graphic conversion technology which have the high complexity and large scale of iterative computation. So in this paper propose parallel algorithm and high speed graphics accelerator architecture using Park's MAMS(Multiple Access Memory System) for Phong Shading, one of many 3D algorithms. The Proposed SIMD processor architecture is simulated by HDL and simulated and got 30 times faster result. It means any kinds of 3D algorithm can make parallel algorithm and accelerated by SIMD processor with Park's MAMS for real time processing.
특집 - 기계류부품 신뢰성평가 기술 - 과다 예압을 받는 테이퍼롤러 베어링의 수명단축효과에 대한 실험적 연구 -
박종원,김도식,Park, Jong-Won,Kim, Do-Sik 재료연구소 2009 機械와 材料 Vol.21 No.3
테이퍼롤러 베어링의 축방향 과다 예압에 의한 수명 단축 효과를 실험적으로 검증하고 그 결과에 의한 베어링의 수명 분포를 분석하여, 기존의 $L_{10}$ 수명식에 비하여 현장 작동 조건에 따른 실질적인 수명을 산출할 수 있는 축방향과 반경방향을 고려한 수명식을 도출하고 이를 프로그램화 하여 설계 및 생산 현장에서 용이하게 활용할 수 있도록 하였다.
박종원,윤선호,차정의,최승철,Park, Jong-Won,Yoon, Sun-Ho,Cha, Jeong-Eui,Choi, Seung-Chul 한국마이크로전자및패키징학회 2008 마이크로전자 및 패키징학회지 Vol.15 No.4
The one and two pair of oxide modules for high temperature thermoelectric power generation were fabricated with $Ca_{2.7}Bi_{0.3}Co_4O_9$(p-type) and $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$(n-type) on $Al_2O_3$ substrate. For the optimizing of the design process, contact resistance was derived from the results of the one pair modules, and then the resistance of two pair modules were calculated to use the derived data. Those values were compared with the measured values for the optimizing of this design process. The resistance of calculated and measured two pairs modules was 0.956 $\Omega$ and 1.110 Q $\Omega$ $T_h$=833 K, respectively, the difference of resistance was about 0.15 $\Omega$. From the result, proposed design process is effective for high temperature thermoelectric oxide modules fabrication. 고온 발전용 열전모듈을 p-type으로는 $Ca_{2.7}Bi_{0.3}Co_4O_9$, n-type으로는 $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$을 선택하고 알루미나 기판 위에 1쌍과 2쌍을 제조하였다. 산화물 열전 모듈의 최적화 설계를 위해 먼저 1쌍의 열전모듈의 실험 결과로부터 전극의 접촉저항을 산출하여 2쌍 모듈에 적용함으로써 저항과 출력 특성을 예측하였다. 예측된 2쌍 모듈의 계산 값과 제조된 2쌍 모듈의 실측 값을 비교함으로써 모듈 설계를 위한 접근방법을 검토하였다. 2쌍 모듈의 계산된 저항과 측정된 저항은 각각 $T_h$=833 K에서 0.954 $\Omega$과 1.105 $\Omega$으로 약 0.15 $\Omega$ 정도의 차이로 근접한 결과를 얻었으며, 제시된 방법으로 고온산화물 열전 모듈 제작에 유효하다고 판단된다.
석탄 비산재로부터 합성된 제올라이트의 암모니아의 흡착용량 및 파과특성
박종원,이창한,Park, Jong-Won,Lee, Chang-Han 한국환경과학회 2022 한국환경과학회지 Vol.31 No.10
A zeolite material with a Si/Al molar ratio of 1.2 was synthesized by changing the NaOH/CFA ratio of coal fly ash (CFA) via a fusion/hydrothermal reaction in the HD thermal power plant. The change in the crystal structure of the zeolite was confirmed using XRD and SEM, and the ammonia adsorption capacities of the synthesized zeolitic materials and a commercial zeolite (Na-A zeolite) were analyzed via an ammonia temperature-programmed desorption (NH<sub>3</sub>-TPD) process. The SEM and XRD results revealed out the zeolitic materials from the coal fly ash maintained a hexagonal Linde-type crystal structure similar to that of Na-A zeolite, but the crystallinity of the synthesized zeolitic material was reduced due to impurities. The NH<sub>3</sub> adsorption capacity, determined from the NH<sub>3</sub>-TPD analysis of was 1.122 mmol/g of the synthesized zeolitic material, which was lower than the NH<sub>3</sub> adsorption capacity of the Na-A zeolite.
PAC 응집제 종류에 따른 조류가 포함된 상수원수의 부상분리효율 비교
박종원,민성기,이혜연,윤철종,이창한,Jong-Won Park,Seong-Kee Min,Hye-Yeon Lee,Churl-Jong Yun,Chang-Han Lee 한국환경과학회 2023 한국환경과학회지 Vol.32 No.5
This study used a batch DAF (dissolved air flotation) jar tester to evaluate the algae removal efficiency of alum and PAC coagulants during coagulation, flocculation, and flotation. Optimal coagulant dosages were 0.06 ~ 0.15 mL/L (12.0 ~ 26.0 mg Al/L,17%), 0.08 ~ 0.20 mL/L (10.0 ~ 24.0 mg Al/L, 12%), 0.25 ~ 0.30 mL/L (25.0 ~ 30.0 mg Al/L, 10%) for PAC, and 3.0 ~ 5.0 mL/L (81.0 ~ 135.0 mg Al/L, 2.7%) for alum. Turbidity of treated water was 1.0 ~ 2.0 NTU in optimal coagulation, flocculation, and flotation conditions for the four coagulants types. The amount of coagulant injected tended to decrease with increasing Al content in the coagulant, as follows : 17% PAC < 12% PAC < 10% PAC < 2.7% alum. Turbidity removal efficiencies were in the order of 12% PAC (93.6%) > 10% PAC (92.7%) > 17% PAC (91.3%) > 2.7% Alum (88.1%).